[PATCH v2 4/8] riscv: Add AST2700 SoC initial platform support
Chia-Wei Wang
chiawei_wang at aspeedtech.com
Tue Sep 10 11:39:16 CEST 2024
AST2700 SoCs integrates a Ibex 32-bits RISC-V core as the boot MCU
for the first stage bootloader execution, namely SPL.
This patch implements the preliminary base to successfully run SPL
on this RV32-based MCU to the console banner message.
Signed-off-by: Chia-Wei Wang <chiawei_wang at aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang at andestech.com>
---
arch/riscv/Kconfig | 5 +
arch/riscv/cpu/ast2700/Kconfig | 6 +
arch/riscv/cpu/ast2700/Makefile | 1 +
arch/riscv/cpu/ast2700/cpu.c | 23 ++++
arch/riscv/dts/Makefile | 1 +
arch/riscv/dts/ast2700-ibex.dts | 22 ++++
arch/riscv/dts/ast2700-u-boot.dtsi | 40 ++++++
arch/riscv/dts/ast2700.dtsi | 76 ++++++++++++
arch/riscv/include/asm/arch-ast2700/scu.h | 145 ++++++++++++++++++++++
arch/riscv/include/asm/arch-ast2700/sli.h | 82 ++++++++++++
board/aspeed/ibex_ast2700/Kconfig | 21 ++++
board/aspeed/ibex_ast2700/MAINTAINERS | 7 ++
board/aspeed/ibex_ast2700/Makefile | 2 +
board/aspeed/ibex_ast2700/ibex_ast2700.c | 85 +++++++++++++
board/aspeed/ibex_ast2700/sli.c | 72 +++++++++++
configs/ibex-ast2700_defconfig | 92 ++++++++++++++
doc/board/aspeed/ibex-ast2700.rst | 26 ++++
doc/board/aspeed/index.rst | 9 ++
doc/board/index.rst | 1 +
include/configs/ibex_ast2700.h | 12 ++
20 files changed, 728 insertions(+)
create mode 100644 arch/riscv/cpu/ast2700/Kconfig
create mode 100644 arch/riscv/cpu/ast2700/Makefile
create mode 100644 arch/riscv/cpu/ast2700/cpu.c
create mode 100644 arch/riscv/dts/ast2700-ibex.dts
create mode 100644 arch/riscv/dts/ast2700-u-boot.dtsi
create mode 100644 arch/riscv/dts/ast2700.dtsi
create mode 100644 arch/riscv/include/asm/arch-ast2700/scu.h
create mode 100644 arch/riscv/include/asm/arch-ast2700/sli.h
create mode 100644 board/aspeed/ibex_ast2700/Kconfig
create mode 100644 board/aspeed/ibex_ast2700/MAINTAINERS
create mode 100644 board/aspeed/ibex_ast2700/Makefile
create mode 100644 board/aspeed/ibex_ast2700/ibex_ast2700.c
create mode 100644 board/aspeed/ibex_ast2700/sli.c
create mode 100644 configs/ibex-ast2700_defconfig
create mode 100644 doc/board/aspeed/ibex-ast2700.rst
create mode 100644 doc/board/aspeed/index.rst
create mode 100644 include/configs/ibex_ast2700.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index d0476f975c2..6b854cc0b65 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -46,6 +46,9 @@ config TARGET_TH1520_LPI4A
config TARGET_XILINX_MBV
bool "Support AMD/Xilinx MicroBlaze V"
+config TARGET_ASPEED_AST2700_IBEX
+ bool "Support Ibex RISC-V cores on Aspeed AST2700 SoC"
+
endchoice
config SYS_ICACHE_OFF
@@ -81,6 +84,7 @@ config SPL_ZERO_MEM_BEFORE_USE
# board-specific options below
source "board/andestech/ae350/Kconfig"
+source "board/aspeed/ibex_ast2700/Kconfig"
source "board/emulation/qemu-riscv/Kconfig"
source "board/microchip/mpfs_icicle/Kconfig"
source "board/openpiton/riscv64/Kconfig"
@@ -97,6 +101,7 @@ source "arch/riscv/cpu/andes/Kconfig"
source "arch/riscv/cpu/cv1800b/Kconfig"
source "arch/riscv/cpu/fu540/Kconfig"
source "arch/riscv/cpu/fu740/Kconfig"
+source "arch/riscv/cpu/ast2700/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
source "arch/riscv/cpu/jh7110/Kconfig"
diff --git a/arch/riscv/cpu/ast2700/Kconfig b/arch/riscv/cpu/ast2700/Kconfig
new file mode 100644
index 00000000000..b16f0fc7cad
--- /dev/null
+++ b/arch/riscv/cpu/ast2700/Kconfig
@@ -0,0 +1,6 @@
+config RISCV_AST2700
+ bool
+ imply CPU
+ imply CPU_RISCV
+ help
+ Run U-Boot on AST2700 with IBex RISC-V CPU integrated.
diff --git a/arch/riscv/cpu/ast2700/Makefile b/arch/riscv/cpu/ast2700/Makefile
new file mode 100644
index 00000000000..1f843c706ad
--- /dev/null
+++ b/arch/riscv/cpu/ast2700/Makefile
@@ -0,0 +1 @@
+obj-y += cpu.o
diff --git a/arch/riscv/cpu/ast2700/cpu.c b/arch/riscv/cpu/ast2700/cpu.c
new file mode 100644
index 00000000000..c1540546a9a
--- /dev/null
+++ b/arch/riscv/cpu/ast2700/cpu.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ * Copyright (C) 2024, Aspeed Technology Inc.
+ */
+
+#include <irq_func.h>
+#include <asm/cache.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+ disable_interrupts();
+
+ cache_flush();
+
+ return 0;
+}
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 17cda483e12..c4c44057bad 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2.dtb
dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb
dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb
+dtb-$(CONFIG_TARGET_ASPEED_AST2700_IBEX) += ast2700-ibex.dtb
include $(srctree)/scripts/Makefile.dts
diff --git a/arch/riscv/dts/ast2700-ibex.dts b/arch/riscv/dts/ast2700-ibex.dts
new file mode 100644
index 00000000000..f7a05e5771b
--- /dev/null
+++ b/arch/riscv/dts/ast2700-ibex.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "ast2700.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart12;
+ tick-timer = &ast_ibex_timer;
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&uart12 {
+ status = "okay";
+ clock-frequency = <1846153>;
+};
diff --git a/arch/riscv/dts/ast2700-u-boot.dtsi b/arch/riscv/dts/ast2700-u-boot.dtsi
new file mode 100644
index 00000000000..ddc08a4bcef
--- /dev/null
+++ b/arch/riscv/dts/ast2700-u-boot.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/ {
+ cpus {
+ bootph-all;
+ };
+
+ memory at 80000000 {
+ bootph-all;
+ };
+
+ soc0: soc at 12000000 {
+ bootph-all;
+
+ sdrammc: sdrammc at 12c00000 {
+ bootph-all;
+ };
+
+ syscon0: syscon at 12c02000 {
+ bootph-all;
+ };
+ };
+
+ soc1: soc at 14000000 {
+ bootph-all;
+
+ syscon1: syscon at 14c02000 {
+ bootph-all;
+ };
+
+ uart12: serial at 14c33b00 {
+ bootph-all;
+ };
+
+ ast_ibex_timer: timer {
+ bootph-all;
+ };
+ };
+
+};
diff --git a/arch/riscv/dts/ast2700.dtsi b/arch/riscv/dts/ast2700.dtsi
new file mode 100644
index 00000000000..9b482dfdd84
--- /dev/null
+++ b/arch/riscv/dts/ast2700.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+ model = "Aspeed AST2700 Ibex BootMCU";
+ compatible = "aspeed,ast2700-ibex";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "lowrisc,ibex";
+ device_type = "cpu";
+ reg = <0>;
+ comptaible = "riscv";
+ riscv,isa = "rv32imc";
+ };
+ };
+
+ memory at 80000000 {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ soc0: soc at 12000000 {
+ compatible = "aspeed,soc1","simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sdrammc: sdrammc at 12c00000 {
+ compatible = "aspeed,ast2700-sdrammc";
+ reg = <0x12c00000 0x3000>, <0x13000000 0x1000>;
+ aspeed,scu0 = <&syscon0>;
+ aspeed,scu1 = <&syscon1>;
+ };
+
+ syscon0: syscon at 12c02000 {
+ compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
+ reg = <0x12c02000 0x1000>;
+ ranges = <0 0x12c02000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ soc1: soc at 14000000 {
+ compatible = "aspeed,soc1","simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon1: syscon at 14c02000 {
+ compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
+ reg = <0x14c02000 0x1000>;
+ ranges = <0 0x14c02000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ uart12: serial at 14c33b00 {
+ compatible = "ns16550a";
+ reg = <0x14c33b00 0x20>;
+ reg-shift = <2>;
+ no-loopback-test;
+ clock-frequency = <1846153>;
+ status = "disabled";
+ };
+
+ ast_ibex_timer: timer {
+ compatible = "aspeed,ast2700-ibex-timer";
+ clock-frequency = <200000000>;
+ };
+ };
+};
diff --git a/arch/riscv/include/asm/arch-ast2700/scu.h b/arch/riscv/include/asm/arch-ast2700/scu.h
new file mode 100644
index 00000000000..1aa7d38bace
--- /dev/null
+++ b/arch/riscv/include/asm/arch-ast2700/scu.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#ifndef __ASM_AST2700_SCU_H__
+#define __ASM_AST2700_SCU_H__
+
+/* SCU0: CPU-die SCU */
+#define SCU0_HWSTRAP 0x010
+#define SCU0_HWSTRAP_DIS_RVAS BIT(30)
+#define SCU0_HWSTRAP_DIS_WDTFULL BIT(25)
+#define SCU0_HWSTRAP_DISARMICE_TZ BIT(22)
+#define SCU0_HWSTRAP_DISABLE_XHCI BIT(21)
+#define SCU0_HWSTRAP_BOOTEMMCSPEED BIT(20)
+#define SCU0_HWSTRAP_VGA_CC BIT(18)
+#define SCU0_HWSTRAP_EN_OPROM BIT(17)
+#define SCU0_HWSTRAP_DISARMICE BIT(16)
+#define SCU0_HWSTRAP_TSPRSNTSEL BIT(9)
+#define SCU0_HWSTRAP_DISDEBUG BIT(8)
+#define SCU0_HWSTRAP_HCLKHPLL BIT(7)
+#define SCU0_HWSTRAP_HCLKSEL GENMASK(6, 5)
+#define SCU0_HWSTRAP_CPUHPLL BIT(4)
+#define SCU0_HWSTRAP_HPLLFREQ GENMASK(3, 2)
+#define SCU0_HWSTRAP_BOOTSPI BIT(1)
+#define SCU0_HWSTRAP_HWSTRAP_DISCPU BIT(0)
+#define SCU0_DBGCTL 0x0c8
+#define SCU0_DBGCTL_MASK GENMASK(14, 0)
+#define SCU0_DBGCTL_UARTDBG BIT(1)
+#define SCU0_RSTCTL1 0x200
+#define SCU0_RSTCTL1_EMMC BIT(17)
+#define SCU0_RSTCTL1_HACE BIT(4)
+#define SCU0_RSTCTL1_CLR 0x204
+#define SCU0_RSTCTL1_CLR_EMMC BIT(17)
+#define SCU0_RSTCTL1_CLR_HACE BIT(4)
+#define SCU0_CLKGATE1 0x240
+#define SCU0_CLKGATE1_EMMC BIT(27)
+#define SCU0_CLKGATE1_HACE BIT(13)
+#define SCU0_CLKGATE1_DDRPHY BIT(11)
+#define SCU0_CLKGATE1_CLR 0x244
+#define SCU0_CLKGATE1_CLR_EMMC BIT(27)
+#define SCU0_CLKGATE1_CLR_HACE BIT(13)
+#define SCU0_CLKGATE1_CLR_DDRPHY BIT(11)
+#define SCU0_VGA0_SCRATCH 0x900
+#define SCU0_VGA0_SCRATCH_DRAM_INIT BIT(6)
+#define SCU0_PCI_MISC70 0xa70
+#define SCU0_PCI_MISC70_EN_PCIEXHCI0 BIT(3)
+#define SCU0_PCI_MISC70_EN_PCIEEHCI0 BIT(2)
+#define SCU0_PCI_MISC70_EN_PCIEVGA0 BIT(0)
+#define SCU0_PCI_MISC80 0xa80
+#define SCU0_PCI_MISC80_EN_PCIEXHCI1 BIT(3)
+#define SCU0_PCI_MISC80_EN_PCIEEHCI1 BIT(2)
+#define SCU0_PCI_MISC80_EN_PCIEVGA1 BIT(0)
+#define SCU0_PCI_MISCF0 0xaf0
+#define SCU0_PCI_MISCF0_EN_PCIEXHCI1 BIT(3)
+#define SCU0_PCI_MISCF0_EN_PCIEEHCI1 BIT(2)
+#define SCU0_PCI_MISCF0_EN_PCIEVGA1 BIT(0)
+#define SCU0_WPROT1 0xe04
+#define SCU0_WPROT1_0C8 BIT(18)
+
+/* SCU1: IO-die SCU */
+#define SCU1_REVISION 0x000
+#define SCU1_REVISION_HWID GENMASK(23, 16)
+#define SCU1_REVISION_CHIP_EFUSE GENMASK(15, 8)
+#define SCU1_HWSTRAP1 0x010
+#define SCU1_HWSTRAP1_DIS_CPTRA BIT(30)
+#define SCU1_HWSTRAP1_RECOVERY_USB_PORT GENMASK(29, 28)
+#define SCU1_HWSTRAP1_RECOVERY_INTERFACE GENMASK(27, 26)
+#define SCU1_HWSTRAP1_RECOVERY_I3C (BIT(26) | BIT(27))
+#define SCU1_HWSTRAP1_RECOVERY_I2C BIT(27)
+#define SCU1_HWSTRAP1_RECOVERY_USB BIT(26)
+#define SCU1_HWSTRAP1_SPI_FLASH_4_BYTE_MODE BIT(25)
+#define SCU1_HWSTRAP1_SPI_FLASH_WAIT_READY BIT(24)
+#define SCU1_HWSTRAP1_BOOT_UFS BIT(23)
+#define SCU1_HWSTRAP1_DIS_ROM BIT(22)
+#define SCU1_HWSTRAP1_DIS_CPTRAJTAG BIT(20)
+#define SCU1_HWSTRAP1_UARTDBGSEL BIT(19)
+#define SCU1_HWSTRAP1_DIS_UARTDBG BIT(18)
+#define SCU1_HWSTRAP1_DIS_WDTFULL BIT(17)
+#define SCU1_HWSTRAP1_DISDEBUG1 BIT(16)
+#define SCU1_HWSTRAP1_LTPI0_IO_DRIVING GENMASK(15, 14)
+#define SCU1_HWSTRAP1_ACPI_1 BIT(13)
+#define SCU1_HWSTRAP1_ACPI_0 BIT(12)
+#define SCU1_HWSTRAP1_BOOT_EMMC_UFS BIT(11)
+#define SCU1_HWSTRAP1_DDR4 BIT(10)
+#define SCU1_HWSTRAP1_LOW_SECURE BIT(8)
+#define SCU1_HWSTRAP1_EN_EMCS BIT(7)
+#define SCU1_HWSTRAP1_EN_GPIOPT BIT(6)
+#define SCU1_HWSTRAP1_EN_SECBOOT BIT(5)
+#define SCU1_HWSTRAP1_EN_RECOVERY_BOOT BIT(4)
+#define SCU1_HWSTRAP1_LTPI0_EN BIT(3)
+#define SCU1_HWSTRAP1_LTPI_IDX BIT(2)
+#define SCU1_HWSTRAP1_LTPI1_EN BIT(1)
+#define SCU1_HWSTRAP1_LTPI_MODE BIT(0)
+#define SCU1_HWSTRAP2 0x030
+#define SCU1_HWSTRAP2_FMC_ABR_SINGLE_FLASH BIT(29)
+#define SCU1_HWSTRAP2_FMC_ABR_CS_SWAP_DIS BIT(28)
+#define SCU1_HWSTRAP2_SPI_TPM_PCR_EXT_EN BIT(27)
+#define SCU1_HWSTRAP2_SPI_TPM_HASH_ALGO GENMASK(26, 25)
+#define SCU1_HWSTRAP2_BOOT_SPI_FREQ GENMASK(24, 23)
+#define SCU1_HWSTRAP2_RESERVED GENMASK(22, 19)
+#define SCU1_HWSTRAP2_FWSPI_CRTM GENMASK(18, 17)
+#define SCU1_HWSTRAP2_EN_FWSPIAUX BIT(16)
+#define SCU1_HWSTRAP2_FWSPISIZE GENMASK(15, 13)
+#define SCU1_HWSTRAP2_DIS_REC BIT(12)
+#define SCU1_HWSTRAP2_EN_CPTRA_DBG BIT(11)
+#define SCU1_HWSTRAP2_TPM_PCR_INDEX GENMASK(6, 2)
+#define SCU1_HWSTRAP2_ROM_CLEAR_SRAM BIT(1)
+#define SCU1_HWSTRAP2_ABR BIT(0)
+#define SCU1_RSTLOG0 0x050
+#define SCU1_RSTLOG0_BMC_CPU BIT(12)
+#define SCU1_RSTLOG0_ABR BIT(2)
+#define SCU1_RSTLOG0_EXTRSTN BIT(1)
+#define SCU1_RSTLOG0_SRST BIT(0)
+#define SCU1_MISC1 0x0c0
+#define SCU1_MISC1_UARTDBG_ROUTE GENMASK(23, 22)
+#define SCU1_MISC1_UART12_ROUTE GENMASK(21, 20)
+#define SCU1_DBGCTL 0x0c8
+#define SCU1_DBGCTL_MASK GENMASK(7, 0)
+#define SCU1_DBGCTL_UARTDBG BIT(6)
+#define SCU1_RNG_DATA 0x0f4
+#define SCU1_RSTCTL1 0x200
+#define SCU1_RSTCTL1_I3C(x) (BIT(16) << (x))
+#define SCU1_RSTCTL1_CLR 0x204
+#define SCU1_RSTCTL1_CLR_I3C(x) (BIT(16) << (x))
+#define SCU1_RSTCTL2 0x220
+#define SCU1_RSTCTL2_LTPI1 BIT(22)
+#define SCU1_RSTCTL2_LTPI0 BIT(20)
+#define SCU1_RSTCTL2_I2C BIT(15)
+#define SCU1_RSTCTL2_CPTRA BIT(9)
+#define SCU1_RSTCTL2_CLR 0x224
+#define SCU1_RSTCTL2_CLR_I2C BIT(15)
+#define SCU1_RSTCTL2_CLR_CPTRA BIT(9)
+#define SCU1_CLKGATE1 0x240
+#define SCU1_CLKGATE1_I3C(x) (BIT(16) << (x))
+#define SCU1_CLKGATE1_I2C BIT(15)
+#define SCU1_CLKGATE1_CLR 0x244
+#define SCU1_CLKGATE1_CLR_I3C(x) (BIT(16) << (x))
+#define SCU1_CLKGATE1_CLR_I2C BIT(15)
+#define SCU1_CLKGATE2 0x260
+#define SCU1_CLKGATE2_LTPI1_TX BIT(19)
+#define SCU1_CLKGATE2_LTPI_AHB BIT(10)
+#define SCU1_CLKGATE2_LTPI0_TX BIT(9)
+#define SCU1_CLKGATE2_CLR 0x264
+
+#endif
diff --git a/arch/riscv/include/asm/arch-ast2700/sli.h b/arch/riscv/include/asm/arch-ast2700/sli.h
new file mode 100644
index 00000000000..42f0f9ac93d
--- /dev/null
+++ b/arch/riscv/include/asm/arch-ast2700/sli.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#ifndef __ASM_AST2700_SLI_H__
+#define __ASM_AST2700_SLI_H__
+
+#define SLI_CPU_ADRBASE 0x12c17000
+#define SLI_IOD_ADRBASE 0x14c1e000
+#define SLIM_CPU_BASE (SLI_CPU_ADRBASE + 0x000)
+#define SLIH_CPU_BASE (SLI_CPU_ADRBASE + 0x200)
+#define SLIV_CPU_BASE (SLI_CPU_ADRBASE + 0x400)
+#define SLIM_IOD_BASE (SLI_IOD_ADRBASE + 0x000)
+#define SLIH_IOD_BASE (SLI_IOD_ADRBASE + 0x200)
+#define SLIV_IOD_BASE (SLI_IOD_ADRBASE + 0x400)
+
+#define SLI_CTRL_I 0x00
+#define SLIV_RAW_MODE BIT(15)
+#define SLI_TX_MODE BIT(14)
+#define SLI_RX_PHY_LAH_SEL_REV BIT(13)
+#define SLI_RX_PHY_LAH_SEL_NEG BIT(12)
+#define SLI_AUTO_SEND_TRN_OFF BIT(8)
+#define SLI_CLEAR_BUS BIT(6)
+#define SLI_TRANS_EN BIT(5)
+#define SLI_CLEAR_RX BIT(2)
+#define SLI_CLEAR_TX BIT(1)
+#define SLI_RESET_TRIGGER BIT(0)
+#define SLI_CTRL_II 0x04
+#define SLI_CTRL_III 0x08
+#define SLI_CLK_SEL GENMASK(31, 28)
+#define SLI_CLK_500M 0x6
+#define SLI_CLK_200M 0x3
+#define SLI_PHYCLK_SEL GENMASK(27, 24)
+#define SLI_PHYCLK_25M 0x0
+#define SLI_PHYCLK_800M 0x1
+#define SLI_PHYCLK_400M 0x2
+#define SLI_PHYCLK_200M 0x3
+#define SLI_PHYCLK_788M 0x5
+#define SLI_PHYCLK_500M 0x6
+#define SLI_PHYCLK_250M 0x7
+#define SLIH_PAD_DLY_TX1 GENMASK(23, 18)
+#define SLIH_PAD_DLY_TX0 GENMASK(17, 12)
+#define SLIH_PAD_DLY_RX1 GENMASK(11, 6)
+#define SLIH_PAD_DLY_RX0 GENMASK(5, 0)
+#define SLIM_PAD_DLY_RX3 GENMASK(23, 18)
+#define SLIM_PAD_DLY_RX2 GENMASK(17, 12)
+#define SLIM_PAD_DLY_RX1 GENMASK(11, 6)
+#define SLIM_PAD_DLY_RX0 GENMASK(5, 0)
+#define SLI_CTRL_IV 0x0c
+#define SLIM_PAD_DLY_TX3 GENMASK(23, 18)
+#define SLIM_PAD_DLY_TX2 GENMASK(17, 12)
+#define SLIM_PAD_DLY_TX1 GENMASK(11, 6)
+#define SLIM_PAD_DLY_TX0 GENMASK(5, 0)
+#define SLI_INTR_EN 0x10
+#define SLI_INTR_STATUS 0x14
+#define SLI_INTR_RX_SYNC BIT(15)
+#define SLI_INTR_RX_ERR BIT(13)
+#define SLI_INTR_RX_NACK BIT(12)
+#define SLI_INTR_RX_TRAIN_PKT BIT(10)
+#define SLI_INTR_RX_DISCONN BIT(6)
+#define SLI_INTR_TX_SUSPEND BIT(4)
+#define SLI_INTR_TX_TRAIN BIT(3)
+#define SLI_INTR_TX_IDLE BIT(2)
+#define SLI_INTR_RX_SUSPEND BIT(1)
+#define SLI_INTR_RX_IDLE BIT(0)
+#define SLI_INTR_RX_ERRORS \
+ (SLI_INTR_RX_ERR | SLI_INTR_RX_NACK | SLI_INTR_RX_DISCONN)
+
+#define SLIM_MARB_FUNC_I 0x60
+#define SLIM_SLI_MARB_RR BIT(0)
+
+#define SLI_TARGET_PHYCLK SLI_PHYCLK_400M
+#define SLIH_DEFAULT_DELAY 11
+#if (SLI_TARGET_PHYCLK == SLI_PHYCLK_800M) || (SLI_TARGET_PHYCLK == SLI_PHYCLK_788M)
+#define SLIM_DEFAULT_DELAY 5
+#define SLIM_LAH_CONFIG 1
+#else
+#define SLIM_DEFAULT_DELAY 12
+#define SLIM_LAH_CONFIG 0
+#endif
+#endif
+int sli_init(void);
diff --git a/board/aspeed/ibex_ast2700/Kconfig b/board/aspeed/ibex_ast2700/Kconfig
new file mode 100644
index 00000000000..469cea58d12
--- /dev/null
+++ b/board/aspeed/ibex_ast2700/Kconfig
@@ -0,0 +1,21 @@
+if TARGET_ASPEED_AST2700_IBEX
+
+config SYS_BOARD
+ default "ibex_ast2700"
+
+config SYS_VENDOR
+ default "aspeed"
+
+config SYS_CPU
+ default "ast2700"
+
+config SYS_CONFIG_NAME
+ default "ibex_ast2700"
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select RISCV_AST2700
+ select SUPPORT_SPL
+ imply SPL_DRIVERS_MISC
+
+endif
diff --git a/board/aspeed/ibex_ast2700/MAINTAINERS b/board/aspeed/ibex_ast2700/MAINTAINERS
new file mode 100644
index 00000000000..777f582a20d
--- /dev/null
+++ b/board/aspeed/ibex_ast2700/MAINTAINERS
@@ -0,0 +1,7 @@
+AST2700 using Ibex RISC-V Core as the boot MCU
+M: Chia-Wei, Wang <chiawei_wang at aspeedtech.com>
+S: Maintained
+F: arch/riscv/include/asm/arch-ast2700/
+F: board/aspeed/ibex_ast2700/
+F: configs/ibex-ast2700_defconfig
+F: include/configs/ibex_ast2700.h
diff --git a/board/aspeed/ibex_ast2700/Makefile b/board/aspeed/ibex_ast2700/Makefile
new file mode 100644
index 00000000000..162f46fd46a
--- /dev/null
+++ b/board/aspeed/ibex_ast2700/Makefile
@@ -0,0 +1,2 @@
+obj-y += ibex_ast2700.o
+obj-y += sli.o
diff --git a/board/aspeed/ibex_ast2700/ibex_ast2700.c b/board/aspeed/ibex_ast2700/ibex_ast2700.c
new file mode 100644
index 00000000000..e697f9b8baa
--- /dev/null
+++ b/board/aspeed/ibex_ast2700/ibex_ast2700.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#include <asm/io.h>
+#include <asm/arch/sli.h>
+#include <dm.h>
+#include <ram.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ int ret;
+ struct udevice *dev;
+ struct ram_info ram;
+
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ printf("cannot get DRAM driver\n");
+ return ret;
+ }
+
+ ret = ram_get_info(dev, &ram);
+ if (ret) {
+ printf("cannot get DRAM information\n");
+ return ret;
+ }
+
+ gd->ram_size = ram.size;
+
+ return 0;
+}
+
+int spl_board_init_f(void)
+{
+ sli_init();
+
+ dram_init();
+
+ return 0;
+}
+
+struct legacy_img_hdr *spl_get_load_buffer(ssize_t offset, size_t size)
+{
+ return (struct legacy_img_hdr *)CONFIG_SYS_LOAD_ADDR;
+}
+
+void *board_spl_fit_buffer_addr(ulong fit_size, int sectors, int bl_len)
+{
+ return (void *)spl_get_load_buffer(sectors, bl_len);
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_RAM;
+}
+
+int board_init(void)
+{
+ struct udevice *dev;
+ int i = 0;
+ int ret;
+
+ /*
+ * Loop over all MISC uclass drivers to call the comphy code
+ * and init all CP110 devices enabled in the DT
+ */
+ while (1) {
+ /* Call the comphy code via the MISC uclass driver */
+ ret = uclass_get_device(UCLASS_MISC, i++, &dev);
+
+ /* We're done, once no further CP110 device is found */
+ if (ret)
+ break;
+ }
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
diff --git a/board/aspeed/ibex_ast2700/sli.c b/board/aspeed/ibex_ast2700/sli.c
new file mode 100644
index 00000000000..7868111d844
--- /dev/null
+++ b/board/aspeed/ibex_ast2700/sli.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+#include <asm/io.h>
+#include <asm/arch/sli.h>
+#include <asm/arch/scu.h>
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+
+#define SLI_POLL_TIMEOUT_US 100
+
+static void sli_clear_interrupt_status(uint32_t base)
+{
+ writel(-1, (void *)base + SLI_INTR_STATUS);
+}
+
+static int sli_wait(uint32_t base, uint32_t mask)
+{
+ uint32_t value;
+
+ sli_clear_interrupt_status(base);
+
+ do {
+ value = readl((void *)base + SLI_INTR_STATUS);
+ if (value & SLI_INTR_RX_ERRORS)
+ return -1;
+ } while ((value & mask) != mask);
+
+ return 0;
+}
+
+static int sli_wait_suspend(uint32_t base)
+{
+ return sli_wait(base, SLI_INTR_TX_SUSPEND | SLI_INTR_RX_SUSPEND);
+}
+
+/*
+ * CPU die --- downstream pads ---> I/O die
+ * CPU die <--- upstream pads ----- I/O die
+ *
+ * US/DS PAD[3:0] : SLIM[3:0]
+ * US/DS PAD[5:4] : SLIH[1:0]
+ * US/DS PAD[7:6] : SLIV[1:0]
+ */
+int sli_init(void)
+{
+ uint32_t value;
+
+ /* The following training sequence is designed for AST2700A0 */
+ value = FIELD_GET(SCU1_REVISION_HWID, readl(SCU1_REVISION));
+ if (value)
+ return 0;
+
+ /* Return if SLI had been calibrated */
+ value = readl((void *)SLIH_IOD_BASE + SLI_CTRL_III);
+ value = FIELD_GET(SLI_CLK_SEL, value);
+ if (value) {
+ debug("SLI has been initialized\n");
+ return 0;
+ }
+
+ /* 25MHz PAD delay for AST2700A0 */
+ value = SLI_RX_PHY_LAH_SEL_NEG | SLI_TRANS_EN | SLI_CLEAR_BUS;
+ writel(value, (void *)SLIH_IOD_BASE + SLI_CTRL_I);
+ writel(value, (void *)SLIM_IOD_BASE + SLI_CTRL_I);
+ writel(value | SLIV_RAW_MODE, (void *)SLIV_IOD_BASE + SLI_CTRL_I);
+ sli_wait_suspend(SLIH_IOD_BASE);
+ sli_wait_suspend(SLIH_CPU_BASE);
+
+ return 0;
+}
diff --git a/configs/ibex-ast2700_defconfig b/configs/ibex-ast2700_defconfig
new file mode 100644
index 00000000000..22629b90489
--- /dev/null
+++ b/configs/ibex-ast2700_defconfig
@@ -0,0 +1,92 @@
+CONFIG_RISCV=y
+CONFIG_SYS_DCACHE_OFF=y
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+# CONFIG_SPL_USE_ARCH_MEMMOVE is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
+CONFIG_TEXT_BASE=0x80000000
+CONFIG_SYS_MALLOC_LEN=0xf00
+CONFIG_SYS_MALLOC_F_LEN=0xf00
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x14bd7800
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DEFAULT_DEVICE_TREE="ast2700-ibex"
+CONFIG_SPL_TEXT_BASE=0x14bc0080
+CONFIG_DM_RESET=y
+CONFIG_SPL_BSS_START_ADDR=0x14bd7800
+CONFIG_SPL_BSS_MAX_SIZE=0x800
+CONFIG_SPL_SIZE_LIMIT=0x16000
+CONFIG_SPL=y
+CONFIG_SYS_MEM_TOP_HIDE=0x10000000
+CONFIG_SYS_LOAD_ADDR=0x83000000
+CONFIG_BUILD_TARGET=""
+CONFIG_TARGET_ASPEED_AST2700_IBEX=y
+# CONFIG_RISCV_ISA_F is not set
+# CONFIG_RISCV_ISA_A is not set
+# CONFIG_SPL_SMP is not set
+CONFIG_XIP=y
+CONFIG_SPL_XIP=y
+# CONFIG_AVAILABLE_HARTS is not set
+CONFIG_STACK_SIZE_SHIFT=11
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_STACK_SIZE=0x100000
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x200c0000
+# CONFIG_BOOTSTD is not set
+CONFIG_SYS_BOOTM_LEN=0x4000000
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
+# CONFIG_CONSOLE_FLUSH_SUPPORT is not set
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x16000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_BOOTM_LINUX is not set
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_SYSBOOT=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DEVICE_TREE_INCLUDES="ast2700-u-boot.dtsi"
+# CONFIG_OF_TAG_MIGRATE is not set
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+# CONFIG_NET is not set
+CONFIG_SYS_RX_ETH_BUFFER=2
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_DM_SEQ_ALIAS is not set
+# CONFIG_BLOCK_CACHE is not set
+# CONFIG_CPU is not set
+# CONFIG_GPIO is not set
+# CONFIG_I2C is not set
+CONFIG_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_SDHCI=y
+# CONFIG_MTD is not set
+# CONFIG_POWER is not set
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+# CONFIG_RAM_SIFIVE is not set
+CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_MEM32=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+# CONFIG_RSA is not set
+# CONFIG_EFI_LOADER is not set
diff --git a/doc/board/aspeed/ibex-ast2700.rst b/doc/board/aspeed/ibex-ast2700.rst
new file mode 100644
index 00000000000..511bd081ba2
--- /dev/null
+++ b/doc/board/aspeed/ibex-ast2700.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+IBex AST2700
+============
+
+AST2700 integrates an IBex RISC-V 32-bits CPU as the boot MCU to execute the
+first stage bootlaoder, namely SPL.
+
+Build
+-----
+
+1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
+2. Use `make ibex-ast2700_defconfig` in u-boot root to build the image
+
+Running U-Boot SPL
+------------------
+
+The U-Boot SPL will boot in M mode and load the FIT image which includes
+the 2nd stage bootloaders executed by the main processor Cortex-A35.
+
+
+Burn U-Boot to SPI Flash
+------------------------
+
+Use SPI flash programmer (e.g. SF100) to program the u-book-spl.bin with the
+offset 0x80 bytes to the SPI flash beginning.
diff --git a/doc/board/aspeed/index.rst b/doc/board/aspeed/index.rst
new file mode 100644
index 00000000000..d784c88494f
--- /dev/null
+++ b/doc/board/aspeed/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Aspeed
+======
+
+.. toctree::
+ :maxdepth: 2
+
+ ibex-ast2700
diff --git a/doc/board/index.rst b/doc/board/index.rst
index 417c128c7af..3fb7c84f10c 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -14,6 +14,7 @@ Board-specific doc
anbernic/index
apple/index
armltd/index
+ aspeed/index
asus/index
atmel/index
beacon/index
diff --git a/include/configs/ibex_ast2700.h b/include/configs/ibex_ast2700.h
new file mode 100644
index 00000000000..0f6850f7240
--- /dev/null
+++ b/include/configs/ibex_ast2700.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) Aspeed Technology Inc.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
+#define CFG_SYS_SDRAM_BASE 0x80000000
+
+#endif /* __CONFIG_H */
--
2.25.1
More information about the U-Boot
mailing list