[PATCH 02/13] ufs: fix dcache flush and invalidate range calculation

Neha Malcom Francis n-francis at ti.com
Tue Sep 10 13:14:06 CEST 2024


On 10/09/24 14:50, Neil Armstrong wrote:
> The current calculation will omit doing a flush/invalidate on the last
> cacheline if the base address is not aligned with DMA_MINALIGN.
> 
> This causes commands failures and write corruptions on Qualcomm
> platforms.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>   drivers/ufs/ufs.c | 16 ++++++++--------
>   1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c
> index e005cc90608..3d9a7d7ee12 100644
> --- a/drivers/ufs/ufs.c
> +++ b/drivers/ufs/ufs.c
> @@ -703,11 +703,11 @@ static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba)
>    */
>   static void ufshcd_cache_flush_and_invalidate(void *addr, unsigned long size)
>   {
> -	uintptr_t aaddr = (uintptr_t)addr & ~(ARCH_DMA_MINALIGN - 1);
> -	unsigned long asize = ALIGN(size, ARCH_DMA_MINALIGN);
> +	uintptr_t start_addr = (uintptr_t)addr & ~(ARCH_DMA_MINALIGN - 1);
> +	uintptr_t end_addr = ALIGN((uintptr_t)addr + size, ARCH_DMA_MINALIGN);
>   
> -	flush_dcache_range(aaddr, aaddr + asize);
> -	invalidate_dcache_range(aaddr, aaddr + asize);
> +	flush_dcache_range(start_addr, end_addr);
> +	invalidate_dcache_range(start_addr, end_addr);
>   }
>   
>   /**
> @@ -1466,13 +1466,13 @@ static void prepare_prdt_table(struct ufs_hba *hba, struct scsi_cmd *pccb)
>   	}
>   
>   	if (pccb->dma_dir == DMA_TO_DEVICE) {	/* Write to device */
> -		flush_dcache_range(aaddr, aaddr +
> -				   ALIGN(datalen, ARCH_DMA_MINALIGN));
> +		flush_dcache_range(aaddr,
> +				   ALIGN((uintptr_t)pccb->pdata + datalen, ARCH_DMA_MINALIGN));
>   	}
>   
>   	/* In any case, invalidate cache to avoid stale data in it. */
> -	invalidate_dcache_range(aaddr, aaddr +
> -				ALIGN(datalen, ARCH_DMA_MINALIGN));
> +	invalidate_dcache_range(aaddr,
> +				ALIGN((uintptr_t)pccb->pdata + datalen, ARCH_DMA_MINALIGN));
>   
>   	table_length = DIV_ROUND_UP(pccb->datalen, MAX_PRDT_ENTRY);
>   	buf = pccb->pdata;
> 

Reviewed-by: Neha Malcom Francis <n-francis at ti.com>

-- 
Thanking You
Neha Malcom Francis


More information about the U-Boot mailing list