[PATCH v2 0/2] riscv: spacemit: bananapi_f3: add support for Banana Pi F3 board

[Marcel Ziswiler]

On Thu, 2024-07-18 at 12:33 +0800, Kongyang Liu wrote:
> Banana Pi F3 board is a industrial grade RISC-V development board, it
> design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI
> computing power. 4G DDR and 16G eMMC onboard.2x GbE Ethernet prot, 4x USB

missing space before 2x and port rather than prot

> 3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
> 
> This patch introduces fundamental support for the Banana Pi F3 board,
> encompassing UART, CPU, and PLIC support. This ensures that U-Boot can
> operate in serial console mode.
> 
> Changes in v2:
> - Change license to GPL-2.0-or-later
> - Add memory node for dts
> - Add ft_board_setup function for kernel memory init
> - Use default prompt
> 
> Kongyang Liu (2):
>   riscv: spacemit: bananapi_f3: initial support added
>   doc: spacemit: bananapi_f3: document Banana Pi F3 board
> 
>  arch/riscv/Kconfig                     |   5 +
>  arch/riscv/cpu/k1/Kconfig              |  18 ++
>  arch/riscv/cpu/k1/Makefile             |   6 +
>  arch/riscv/cpu/k1/cpu.c                |   9 +
>  arch/riscv/cpu/k1/dram.c               |  54 ++++
>  arch/riscv/dts/Makefile                |   1 +
>  arch/riscv/dts/k1-bananapi-f3.dts      |  25 ++
>  arch/riscv/dts/k1.dtsi                 | 375 +++++++++++++++++++++++++
>  board/spacemit/bananapi_f3/Kconfig     |  25 ++
>  board/spacemit/bananapi_f3/MAINTAINERS |   6 +
>  board/spacemit/bananapi_f3/Makefile    |   5 +
>  board/spacemit/bananapi_f3/board.c     |   9 +
>  configs/bananapi_f3_defconfig          |  20 ++
>  doc/board/index.rst                    |   1 +
>  doc/board/spacemit/bananapi_f3.rst     |  78 +++++
>  doc/board/spacemit/index.rst           |   8 +
>  include/configs/bananapi_f3.h          |  15 +
>  17 files changed, 660 insertions(+)
>  create mode 100644 arch/riscv/cpu/k1/Kconfig
>  create mode 100644 arch/riscv/cpu/k1/Makefile
>  create mode 100644 arch/riscv/cpu/k1/cpu.c
>  create mode 100644 arch/riscv/cpu/k1/dram.c
>  create mode 100644 arch/riscv/dts/k1-bananapi-f3.dts
>  create mode 100644 arch/riscv/dts/k1.dtsi
>  create mode 100644 board/spacemit/bananapi_f3/Kconfig
>  create mode 100644 board/spacemit/bananapi_f3/MAINTAINERS
>  create mode 100644 board/spacemit/bananapi_f3/Makefile
>  create mode 100644 board/spacemit/bananapi_f3/board.c
>  create mode 100644 configs/bananapi_f3_defconfig
>  create mode 100644 doc/board/spacemit/bananapi_f3.rst
>  create mode 100644 doc/board/spacemit/index.rst
>  create mode 100644 include/configs/bananapi_f3.h