[PATCH 8/9] ARM: socfpga: add si5338 clock generator support

[Lothar Rubusch]

On Fri, Sep 13, 2024 at 1:12 AM Marek Vasut <marex at denx.de> wrote:
>
> On 9/12/24 8:06 AM, Lothar Rubusch wrote:
> > The si5338 clock generator is needed on some Enclustra Socfpga SoMs.
> > Introduce minimal support of this device.
> >
> > Signed-off-by: Lothar Rubusch <l.rubusch at gmail.com>
> > ---
> >   drivers/clk/Kconfig                          |   1 +
> >   drivers/clk/Makefile                         |   1 +
> >   drivers/clk/skyworks/Kconfig                 |  10 +
> >   drivers/clk/skyworks/Makefile                |   3 +
> >   drivers/clk/skyworks/Si5338-RevB-Registers.h | 441 +++++++++++++++++++
>
> Is there a matching Linux driver which could be imported instead ?

Well, not that I'm aware of. To be honest, I removed the si5338
related patches. I'm unsure about the approach. The idea is to
initialize the clock generator. This is supposed to be done as early
as possible. So, at Enclustra u-boot/spl or similar would be
preferable. In case I'll present this separately.