[PATCH v2 00/21] imx9: various update

[Peng Fan (OSS)]

Several updates to i.MX9 SOC and i.MX93 EVK, the related code
has been in NXP downstream for some time and gone through several
public releases. Some are directly cherry-picked(with R-b kept),
some are modified from downtream.

This patchset includes:
power domain on fixes
TRDC cleanup and update
MAC address update
i.MX9301/9302 included.
runtime detection of voltage mode
PMIC update
generalize some code for i.MX8M and i.MX9
i.MX93 EVK update and misc.

CI passed.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
Changes in v2:
- Improve subject to patch 3
- 'EL2GO' -> 'EdgeLock 2GO' in patch 4 commit log
- Use HW_CFG1/HW_CFG2 to replace bank2,work[3,4] in patch 5
- Separate patch 6 into two patches, one is MAC update, one is print
  ELE information
- Typo fix in patch 12
- Drop patch 21 "imx93_evk: Enable M.2 VPCIe_3V3 and deassert SD3_nRST",
  this needs kernel dts update first, then U-Boot could follow that
  logic.
- Link to v1: https://lore.kernel.org/r/20240917-imx9-update-v1-0-4fe8effc937e@nxp.com

---
Frank Li (1):
      imx9: soc: imx9: soc: Align UID endianness with ROM

Jacky Bai (1):
      imx9: soc: Mask the wdog reset in src by default on i.mx9

Peng Fan (12):
      imx9: soc: wait ssar when power on power domain
      imx9: soc: Change FSB directly access to fuse API
      imx9: soc: Print ELE information
      imx8m: soc: Drop disable_pmu_cpu_nodes
      imx: Generalize disable_cpu_nodes
      imx9: soc: Disable cpu1 for variants that only has one A55 core
      imx: Generalize fixup_thermal_trips
      imx9: trdc: cleanup code
      imx9: trdc: introduce trdc_mbc_blk_num
      imx93_evk: spl: update pmic settings
      imx93_evk: Remove CONFIG_IMX9_LOW_DRIVE_MODE and ld defconfig
      imx93_evk: add back Low drive mode ddr timing file

Ye Li (7):
      imx9: soc: Configure TRDC for M33 TCM access
      imx9: soc: Print UID in big endian format for EL2GO
      imx9: soc: Change second Ethernet MAC fuse layout
      imx9: soc: Add function to get target voltage mode
      imx9: clock: Update clock init function and sequence
      imx9: Add 233Mhz DDR PLL frequency
      imx93: Add Low performance parts 9302/9301 support

 arch/arm/include/asm/arch-imx/cpu.h                |    2 +
 arch/arm/include/asm/arch-imx9/clock.h             |    3 +-
 arch/arm/include/asm/arch-imx9/imx-regs.h          |   10 +
 arch/arm/include/asm/arch-imx9/sys_proto.h         |   11 +
 arch/arm/include/asm/mach-imx/sys_proto.h          |    8 +-
 arch/arm/mach-imx/Makefile                         |    6 +
 arch/arm/mach-imx/fdt.c                            |  129 ++
 arch/arm/mach-imx/imx8m/soc.c                      |  179 +-
 arch/arm/mach-imx/imx9/Kconfig                     |    6 +-
 arch/arm/mach-imx/imx9/clock.c                     |   40 +-
 arch/arm/mach-imx/imx9/soc.c                       |  258 ++-
 arch/arm/mach-imx/imx9/trdc.c                      |  175 +-
 board/freescale/imx93_evk/Makefile                 |    6 +-
 board/freescale/imx93_evk/lpddr4x_timing_1866mts.c | 1995 ++++++++++++++++++++
 board/freescale/imx93_evk/lpddr4x_timing_ld.c      | 1496 ---------------
 board/freescale/imx93_evk/spl.c                    |   55 +-
 board/phytec/phycore_imx93/spl.c                   |    2 +-
 configs/imx93_11x11_evk_ld_defconfig               |  126 --
 drivers/cpu/imx8_cpu.c                             |    4 +
 drivers/ddr/imx/phy/ddrphy_utils.c                 |    4 +
 include/power/pca9450.h                            |    2 +
 21 files changed, 2582 insertions(+), 1935 deletions(-)
---
base-commit: 1630ff26cc960439b5949b80cfc604a2c8aa47dd
change-id: 20240916-imx9-update-0ce38f6ccd3d

Best regards,
-- 
Peng Fan <peng.fan at nxp.com>