[PATCH v2 10/21] imx9: soc: Mask the wdog reset in src by default on i.mx9

[Peng Fan (OSS)]

From: Jacky Bai <ping.bai at nxp.com>

Normally, the wdog will be used for trigger external PMIC reset
through the WDOG_ANY pin. If the PMIC chip has debounce logic for
the reset signal, in some corner case the wdog can NOT trigger
external PMIC reset if the SoC has been reset internal before the
PMIC captures the WDOG_ANY pin reset, so need to keep the WDOG3-5
reset masked in the SRC to let the PMIC to do the reset safely.

Reviewed-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Jacky Bai <ping.bai at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/mach-imx/imx9/soc.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c
index 112773f98f6..df259c26ad8 100644
--- a/arch/arm/mach-imx/imx9/soc.c
+++ b/arch/arm/mach-imx/imx9/soc.c
@@ -240,15 +240,9 @@ static void disable_wdog(void __iomem *wdog_base)
 
 void init_wdog(void)
 {
-	u32 src_val;
-
 	disable_wdog((void __iomem *)WDG3_BASE_ADDR);
 	disable_wdog((void __iomem *)WDG4_BASE_ADDR);
 	disable_wdog((void __iomem *)WDG5_BASE_ADDR);
-
-	src_val = readl(0x54460018); /* reset mask */
-	src_val &= ~0x1c;
-	writel(src_val, 0x54460018);
 }
 
 static struct mm_region imx93_mem_map[] = {

-- 
2.35.3