[PATCH 12/19] drivers: mtd: nand: cadence: Use bounce buffer

[dinesh.maniyam at intel.com]

From: Dinesh Maniyam <dinesh.maniyam at intel.com>

The patch is to enable nand to use bounce buffer. In bounce buffer,
read/write buf will use cadence->buf which has been allocated
using malloc. This will align the memory and avoid memory to be
allocated in different addresses.

Signed-off-by: Dinesh Maniyam <dinesh.maniyam at intel.com>
---
 drivers/mtd/nand/raw/cadence_nand.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/cadence_nand.c b/drivers/mtd/nand/raw/cadence_nand.c
index 33e8b79520..9a26bdba8c 100644
--- a/drivers/mtd/nand/raw/cadence_nand.c
+++ b/drivers/mtd/nand/raw/cadence_nand.c
@@ -965,7 +965,7 @@ static int cadence_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	cadence_nand_prepare_data_size(mtd, TT_MAIN_OOB_AREA_EXT);
 
 	if (cadence_nand_dma_buf_ok(cadence, buf, mtd->writesize) &&
-	    cadence->caps2.data_control_supp) {
+	    cadence->caps2.data_control_supp && !(chip->options & NAND_USE_BOUNCE_BUFFER) {
 		u8 *oob;
 
 		if (oob_required)
@@ -1132,7 +1132,7 @@ static int cadence_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	 * is supported then transfer data and oob directly.
 	 */
 	if (cadence_nand_dma_buf_ok(cadence, buf, mtd->writesize) &&
-	    cadence->caps2.data_control_supp) {
+	    cadence->caps2.data_control_supp && !(chip->options & NAND_USE_BOUNCE_BUFFER)) {
 		u8 *oob;
 
 		if (oob_required)
@@ -1824,6 +1824,7 @@ static int cadence_nand_attach_chip(struct mtd_info *mtd, struct nand_chip *chip
 			return ret;
 	}
 
+	chip->options |= NAND_USE_BOUNCE_BUFFER;
 	chip->bbt_options |= NAND_BBT_USE_FLASH;
 	chip->bbt_options |= NAND_BBT_NO_OOB;
 	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-- 
2.26.2