[PATCH 1/3] ufs: add support for DesignWare Controller
Venkatesh Yadav Abbarapu
venkatesh.abbarapu at amd.com
Thu Sep 19 11:17:29 CEST 2024
This patch has the goal to add support for DesignWare UFS Controller
specific operations.
This is based on linux kernel commit:
"drivers/scsi/ufs/ufshcd-dwc.c: ufs: add support for DesignWare
Controller" (sha1: 4b9ffb5a353bdee49f1f477ffe2b95ab3f9cbc0c)
It is ported from linux kernel 6.11-rc1.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
---
drivers/ufs/ufs.h | 11 +++
drivers/ufs/ufshcd-dwc.c | 141 +++++++++++++++++++++++++++++++++++++++
drivers/ufs/ufshcd-dwc.h | 23 +++++++
drivers/ufs/ufshci-dwc.h | 32 +++++++++
4 files changed, 207 insertions(+)
create mode 100644 drivers/ufs/ufshcd-dwc.c
create mode 100644 drivers/ufs/ufshcd-dwc.h
create mode 100644 drivers/ufs/ufshci-dwc.h
diff --git a/drivers/ufs/ufs.h b/drivers/ufs/ufs.h
index e8a1441156..83837d5817 100644
--- a/drivers/ufs/ufs.h
+++ b/drivers/ufs/ufs.h
@@ -850,6 +850,7 @@ struct ufs_hba {
struct ufs_pwr_mode_info max_pwr_info;
struct ufs_dev_cmd dev_cmd;
+ enum uic_link_state uic_link_state;
};
static inline int ufshcd_ops_init(struct ufs_hba *hba)
@@ -878,6 +879,14 @@ static inline int ufshcd_ops_link_startup_notify(struct ufs_hba *hba,
return 0;
}
+static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
+{
+ if (hba->ops && hba->ops->phy_initialization)
+ return hba->ops->phy_initialization(hba);
+
+ return 0;
+}
+
/* Controller UFSHCI version */
enum {
UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */
@@ -1022,6 +1031,8 @@ enum {
writel((val), (hba)->mmio_base + (reg))
#define ufshcd_readl(hba, reg) \
readl((hba)->mmio_base + (reg))
+#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
+ UIC_LINK_ACTIVE_STATE)
/**
* ufshcd_rmwl - perform read/modify/write for a controller register
diff --git a/drivers/ufs/ufshcd-dwc.c b/drivers/ufs/ufshcd-dwc.c
new file mode 100644
index 0000000000..db51a3b807
--- /dev/null
+++ b/drivers/ufs/ufshcd-dwc.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ */
+#include <clk.h>
+#include <dm.h>
+#include <ufs.h>
+#include <asm/io.h>
+#include <dm/device_compat.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/time.h>
+
+#include "ufs.h"
+#include "ufshci-dwc.h"
+#include "ufshcd-dwc.h"
+
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+ const struct ufshcd_dme_attr_val *v, int n)
+{
+ int ret = 0;
+ int attr_node = 0;
+
+ for (attr_node = 0; attr_node < n; attr_node++) {
+ ret = ufshcd_dme_set_attr(hba, v[attr_node].attr_sel,
+ ATTR_SET_NOR, v[attr_node].mib_val, v[attr_node].peer);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ufshcd_dwc_program_clk_div() - program clock divider.
+ * @hba: Private Structure pointer
+ * @divider_val: clock divider value to be programmed
+ *
+ */
+static void ufshcd_dwc_program_clk_div(struct ufs_hba *hba, u32 divider_val)
+{
+ ufshcd_writel(hba, divider_val, DWC_UFS_REG_HCLKDIV);
+}
+
+/**
+ * ufshcd_dwc_link_is_up() - check if link is up.
+ * @hba: private structure pointer
+ *
+ * Return: 0 on success, non-zero value on failure.
+ */
+static int ufshcd_dwc_link_is_up(struct ufs_hba *hba)
+{
+ int dme_result = 0;
+
+ ufshcd_dme_get(hba, UIC_ARG_MIB(VS_POWERSTATE), &dme_result);
+
+ if (dme_result == UFSHCD_LINK_IS_UP) {
+ ufshcd_set_link_active(hba);
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
+ * ufshcd_dwc_connection_setup() - configure unipro attributes.
+ * @hba: pointer to drivers private data
+ *
+ * This function configures both the local side (host) and the peer side
+ * (device) unipro attributes to establish the connection to application/
+ * cport.
+ * This function is not required if the hardware is properly configured to
+ * have this connection setup on reset. But invoking this function does no
+ * harm and should be fine even working with any ufs device.
+ *
+ * Return: 0 on success non-zero value on failure.
+ */
+static int ufshcd_dwc_connection_setup(struct ufs_hba *hba)
+{
+ static const struct ufshcd_dme_attr_val setup_attrs[] = {
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_LOCAL },
+ { UIC_ARG_MIB(N_DEVICEID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(N_DEVICEID_VALID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_LOCAL },
+ { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_LOCAL },
+ { UIC_ARG_MIB(T_CPORTMODE), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_LOCAL },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 0, DME_PEER },
+ { UIC_ARG_MIB(N_DEVICEID), 1, DME_PEER },
+ { UIC_ARG_MIB(N_DEVICEID_VALID), 1, DME_PEER },
+ { UIC_ARG_MIB(T_PEERDEVICEID), 1, DME_PEER },
+ { UIC_ARG_MIB(T_PEERCPORTID), 0, DME_PEER },
+ { UIC_ARG_MIB(T_TRAFFICCLASS), 0, DME_PEER },
+ { UIC_ARG_MIB(T_CPORTFLAGS), 0x6, DME_PEER },
+ { UIC_ARG_MIB(T_CPORTMODE), 1, DME_PEER },
+ { UIC_ARG_MIB(T_CONNECTIONSTATE), 1, DME_PEER }
+ };
+ return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * ufshcd_dwc_link_startup_notify() - program clock divider.
+ * @hba: private structure pointer
+ * @status: Callback notify status
+ *
+ * Return: 0 on success, non-zero value on failure.
+ */
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+
+ if (status == PRE_CHANGE) {
+ ufshcd_dwc_program_clk_div(hba, DWC_UFS_REG_HCLKDIV_DIV_125);
+
+ err = ufshcd_vops_phy_initialization(hba);
+ if (err) {
+ dev_err(hba->dev, "Phy setup failed (%d)\n", err);
+ return err;
+ }
+ } else { /* POST_CHANGE */
+ err = ufshcd_dwc_link_is_up(hba);
+ if (err) {
+ dev_err(hba->dev, "Link is not up\n");
+ return err;
+ }
+
+ err = ufshcd_dwc_connection_setup(hba);
+ if (err)
+ dev_err(hba->dev, "Connection setup failed (%d)\n",
+ err);
+ }
+
+ return err;
+}
diff --git a/drivers/ufs/ufshcd-dwc.h b/drivers/ufs/ufshcd-dwc.h
new file mode 100644
index 0000000000..d997045d3c
--- /dev/null
+++ b/drivers/ufs/ufshcd-dwc.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto at synopsys.com>
+ */
+
+#ifndef _UFSHCD_DWC_H
+#define _UFSHCD_DWC_H
+
+struct ufshcd_dme_attr_val {
+ u32 attr_sel;
+ u32 mib_val;
+ u8 peer;
+};
+
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status);
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+ const struct ufshcd_dme_attr_val *v, int n);
+#endif /* End of Header */
diff --git a/drivers/ufs/ufshci-dwc.h b/drivers/ufs/ufshci-dwc.h
new file mode 100644
index 0000000000..9e24c230c6
--- /dev/null
+++ b/drivers/ufs/ufshci-dwc.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto at synopsys.com>
+ */
+
+#ifndef _UFSHCI_DWC_H
+#define _UFSHCI_DWC_H
+
+/* DWC HC UFSHCI specific Registers */
+enum dwc_specific_registers {
+ DWC_UFS_REG_HCLKDIV = 0xFC,
+};
+
+/* Clock Divider Values: Hex equivalent of frequency in MHz */
+enum clk_div_values {
+ DWC_UFS_REG_HCLKDIV_DIV_62_5 = 0x3e,
+ DWC_UFS_REG_HCLKDIV_DIV_125 = 0x7d,
+ DWC_UFS_REG_HCLKDIV_DIV_200 = 0xc8,
+};
+
+/* Selector Index */
+enum selector_index {
+ SELIND_LN0_TX = 0x00,
+ SELIND_LN1_TX = 0x01,
+ SELIND_LN0_RX = 0x04,
+ SELIND_LN1_RX = 0x05,
+};
+#endif
--
2.17.1
More information about the U-Boot
mailing list