[PATCH v4 0/6] rpi5: initial support

[Ivan T. Ivanov]

Hi Stefan,

> On 19 Sep 2024, at 12:36, Stefan Agner <stefan at agner.ch> wrote:
> 
> Hi Ivan,
> 
> I am looking into enabling NVMe boot support using U-Boot on Raspberry
> Pi 5. Which brings me to some questions wrt PCIe support (see below).
> 
> On 2024-01-10 13:29, Ivan T. Ivanov wrote:
>> 


>> * I am dropping PCIe patch for now. I made some progress on porting changes
>>  from vendor Linux tree to U-Boot. Unfortunatly testing it is little bit
>>  tricky. They are many devices behind PCIe, but more or less all of them
>>  requires missing either "reset-controller" or "clock-controller" or
>>  "pin-controller" drivers. I was able to probe "cdns,macb" device, but
>>  access to ethernet PHY over MDIO bus is stucking. Then I ported
>>  "raspberrypi,rp1-adc" driver from vendor Linux tree, but it requires
>>  missing clock. And on top of that machine that I used for developing this
>>  crashed and I lost my PCIe changes :-|. Anyway.
> 
> Have you tried using a M.2 HAT? This likely won't require much in terms
> of enabling the device.
> 
> You write that you made some progress, is that compared to v3? Do you
> mind sharing the latest version of your patches?


No further progress on PCIe for U-Boot from my side was made, sorry.

Stan is working on adding support for 2712 PCIe in Linux [1]. Perhaps
once this is complete we can work on adding U-Boot support for the same,
unless someone don’t beat us, of course. 

Regards,
Ivan