[PATCH V2 1/4] board: rockchip: Convert Anbernic RGxx3 to OF_UPSTREAM
Chris Morgan
macroalpha82 at gmail.com
Thu Sep 19 16:00:19 CEST 2024
From: Chris Morgan <macromorgan at hotmail.com>
Refactor the board detection logic (again) to make it compatible with
the upstream device-trees, and switch to OF_UPSTREAM.
Now the device boots with the device-tree for the 353P, and then
loads the correct device tree (of 10) in the later stages of SPL.
Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
.../dts/rk3566-anbernic-rg353p-u-boot.dtsi | 34 +++
.../arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi | 52 -----
arch/arm/dts/rk3566-anbernic-rgxx3.dts | 28 ---
board/anbernic/rgxx3_rk3566/MAINTAINERS | 4 +-
board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 214 +++++++++++++-----
configs/anbernic-rgxx3-rk3566_defconfig | 10 +-
6 files changed, 195 insertions(+), 147 deletions(-)
create mode 100644 arch/arm/dts/rk3566-anbernic-rg353p-u-boot.dtsi
delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
delete mode 100644 arch/arm/dts/rk3566-anbernic-rgxx3.dts
diff --git a/arch/arm/dts/rk3566-anbernic-rg353p-u-boot.dtsi b/arch/arm/dts/rk3566-anbernic-rg353p-u-boot.dtsi
new file mode 100644
index 00000000000..fa3fbe6c810
--- /dev/null
+++ b/arch/arm/dts/rk3566-anbernic-rg353p-u-boot.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x-u-boot.dtsi"
+
+/ {
+ chosen {
+ u-boot,spl-boot-order = &sdmmc0, &sdhci;
+ };
+
+ /*
+ * Adding fixed regulator to work around driver regulator
+ * requirements. Note that the correct regulator is on by
+ * default at boot and that saradc regulator gets corrected
+ * when proper device-tree is loaded.
+ */
+ vcc_1v8_dummy: vcc-1v8-dummy {
+ bootph-pre-ram;
+ bootph-some-ram;
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_dummy";
+ status = "okay";
+ };
+};
+
+&saradc {
+ bootph-pre-ram;
+ bootph-some-ram;
+ vref-supply = <&vcc_1v8_dummy>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
deleted file mode 100644
index c7e849816a6..00000000000
--- a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-#include "rk356x-u-boot.dtsi"
-
-/ {
- chosen {
- u-boot,spl-boot-order = &sdmmc0, &sdhci;
- };
-};
-
-&dsi_dphy0 {
- status = "okay";
-};
-
-&dsi0 {
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2m1_xfer>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&pmucru {
- assigned-clocks = <&pmucru SCLK_32K_IOE>;
- assigned-clock-parents = <&pmucru CLK_RTC_32K>;
-};
-
-/*
- * We don't need the clocks, but if they are present they may cause
- * probing to fail so we remove them for U-Boot.
- */
-&rk817 {
- /delete-property/ assigned-clocks;
- /delete-property/ assigned-clock-parents;
- /delete-property/ clocks;
- /delete-property/ clock-names;
-};
-
-&sdhci {
- pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
- <&emmc_datastrobe>, <&emmc_rstnout>;
- pinctrl-names = "default";
- bus-width = <8>;
- max-frequency = <200000000>;
- mmc-hs200-1_8v;
- non-removable;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_1v8>;
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dts b/arch/arm/dts/rk3566-anbernic-rgxx3.dts
deleted file mode 100644
index c393c8d07af..00000000000
--- a/arch/arm/dts/rk3566-anbernic-rgxx3.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "rk3566-anbernic-rgxx3.dtsi"
-
-/ {
-
-/*
- * Note this is a pseudo-model that doesn't exist in mainline Linux.
- * This model is used for all RGXX3 devices and the board.c file will
- * set the correct dtb name for loading mainline Linux automatically.
- */
- model = "RGXX3";
- compatible = "anbernic,rg-arc-d", "anbernic,rg-arc-s",
- "anbernic,rg353m", "anbernic,rg353p",
- "anbernic,rg353ps", "anbernic,rg353v",
- "anbernic,rg353vs", "anbernic,rg503",
- "powkiddy,rgb10max3", "powkiddy,rgb30",
- "powkiddy,rk2023", "rockchip,rk3566";
-};
-
-&cru {
- assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
- <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
- assigned-clock-rates = <32768>, <1200000000>,
- <200000000>, <241500000>;
-};
diff --git a/board/anbernic/rgxx3_rk3566/MAINTAINERS b/board/anbernic/rgxx3_rk3566/MAINTAINERS
index 7970e5a4aad..75a1e8076ca 100644
--- a/board/anbernic/rgxx3_rk3566/MAINTAINERS
+++ b/board/anbernic/rgxx3_rk3566/MAINTAINERS
@@ -4,6 +4,4 @@ S: Maintained
F: board/anbernic/rgxx3_rk3566
F: include/configs/anbernic-rgxx3-rk3566.h
F: configs/anbernic-rgxx3-rk3566_defconfig
-F: arch/arm/dts/rk3566-anbernic-rgxx3.dts
-F: arch/arm/dts/rk3566-anbernic-rgxx3.dtsi
-F: arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
+F: arch/arm/dts/rk3566-anbernic-rg353p-u-boot.dtsi
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 5c57b902d14..224019f9ba3 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -11,6 +11,7 @@
#include <dm/lists.h>
#include <env.h>
#include <fdt_support.h>
+#include <i2c.h>
#include <linux/delay.h>
#include <mipi_dsi.h>
#include <mmc.h>
@@ -19,6 +20,8 @@
#include <stdlib.h>
#include <video_bridge.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define GPIO0_BASE 0xfdd60000
#define GPIO4_BASE 0xfe770000
#define GPIO_SWPORT_DR_L 0x0000
@@ -40,10 +43,11 @@ struct rg3xx_model {
const char *board_name;
const char *fdtfile;
const bool detect_panel;
+ const bool uart_con;
};
enum rgxx3_device_id {
- RG353M,
+ RG353M = 1,
RG353P,
RG353V,
RG503,
@@ -61,45 +65,51 @@ static const struct rg3xx_model rg3xx_model_details[] = {
[RG353M] = {
.adc_value = 517, /* Observed average from device */
.board = "rk3566-anbernic-rg353m",
- .board_name = "RG353M",
+ .board_name = "Anbernic RG353M",
/* Device is identical to RG353P. */
.fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb",
.detect_panel = 1,
+ .uart_con = 1,
},
[RG353P] = {
.adc_value = 860, /* Documented value of 860 */
.board = "rk3566-anbernic-rg353p",
- .board_name = "RG353P",
+ .board_name = "Anbernic RG353P",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb",
.detect_panel = 1,
+ .uart_con = 1,
},
[RG353V] = {
.adc_value = 695, /* Observed average from device */
.board = "rk3566-anbernic-rg353v",
- .board_name = "RG353V",
+ .board_name = "Anbernic RG353V",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353v.dtb",
.detect_panel = 1,
+ .uart_con = 1,
},
[RG503] = {
.adc_value = 1023, /* Observed average from device */
.board = "rk3566-anbernic-rg503",
- .board_name = "RG503",
+ .board_name = "Anbernic RG503",
.fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb",
.detect_panel = 0,
+ .uart_con = 1,
},
[RGB30] = {
.adc_value = 383, /* Gathered from second hand information */
.board = "rk3566-powkiddy-rgb30",
- .board_name = "RGB30",
+ .board_name = "Powkiddy RGB30",
.fdtfile = DTB_DIR "rk3566-powkiddy-rgb30.dtb",
.detect_panel = 0,
+ .uart_con = 0,
},
[RK2023] = {
.adc_value = 635, /* Observed average from device */
.board = "rk3566-powkiddy-rk2023",
- .board_name = "RK2023",
+ .board_name = "Powkiddy RK2023",
.fdtfile = DTB_DIR "rk3566-powkiddy-rk2023.dtb",
.detect_panel = 0,
+ .uart_con = 0,
},
[RGARCD] = {
.adc_value = 183, /* Observed average from device */
@@ -107,6 +117,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG ARC-D",
.fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb",
.detect_panel = 0,
+ .uart_con = 1,
},
[RGB10MAX3] = {
.adc_value = 765, /* Observed average from device */
@@ -114,21 +125,24 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Powkiddy RGB10MAX3",
.fdtfile = DTB_DIR "rk3566-powkiddy-rgb10max3.dtb",
.detect_panel = 0,
+ .uart_con = 0,
},
/* Devices with duplicate ADC value */
[RG353PS] = {
.adc_value = 860, /* Observed average from device */
.board = "rk3566-anbernic-rg353ps",
- .board_name = "RG353PS",
+ .board_name = "Anbernic RG353PS",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353ps.dtb",
.detect_panel = 1,
+ .uart_con = 1,
},
[RG353VS] = {
.adc_value = 695, /* Gathered from second hand information */
.board = "rk3566-anbernic-rg353vs",
- .board_name = "RG353VS",
+ .board_name = "Anbernic RG353VS",
.fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb",
.detect_panel = 1,
+ .uart_con = 1,
},
[RGARCS] = {
.adc_value = 183, /* Observed average from device */
@@ -136,6 +150,7 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.board_name = "Anbernic RG ARC-S",
.fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-s.dtb",
.detect_panel = 0,
+ .uart_con = 1,
},
};
@@ -164,7 +179,7 @@ static const struct rg353_panel rg353_panel_details[] = {
void spl_board_init(void)
{
/* Set GPIO0_C5, GPIO0_C6, and GPIO0_C7 to output. */
- writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | \
+ writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) |
(GPIO_C7 | GPIO_C6 | GPIO_C5),
(GPIO0_BASE + GPIO_SWPORT_DDR_H));
/* Set GPIO0_C5 and GPIO_C6 to 0 and GPIO0_C7 to 1. */
@@ -174,16 +189,22 @@ void spl_board_init(void)
/*
* Buzz the buzzer so the user knows something is going on. Make it
- * optional in case PWM is disabled.
+ * optional in case PWM is disabled or if CONFIG_DM_PWM is not
+ * enabled.
*/
void __maybe_unused startup_buzz(void)
{
struct udevice *dev;
int err;
- err = uclass_get_device(UCLASS_PWM, 0, &dev);
+ if (!IS_ENABLED(CONFIG_DM_PWM))
+ return;
+
+ /* Probe the PWM controller. */
+ err = uclass_get_device_by_name(UCLASS_PWM,
+ "pwm at fe6e0010", &dev);
if (err)
- printf("pwm not found\n");
+ return;
pwm_set_enable(dev, 0, 1);
mdelay(200);
@@ -245,6 +266,13 @@ U_BOOT_DRIVER(anbernic_rg353_panel) = {
.plat_auto = sizeof(struct mipi_dsi_panel_plat),
};
+/*
+ * The Anbernic 353 series shipped with 2 distinct displays requiring
+ * 2 distinct drivers, with no way for a user to know which panel is
+ * which. This function queries the DSI panel for the panel ID to
+ * determine which panel is present so the device-tree can be corrected
+ * automatically.
+ */
int rgxx3_detect_display(void)
{
struct udevice *dev;
@@ -333,17 +361,10 @@ int rgxx3_detect_display(void)
return 0;
}
-/* Detect which Anbernic RGXX3 device we are using so as to load the
- * correct devicetree for Linux. Set an environment variable once
- * found. The detection depends on the value of ADC channel 1, the
- * presence of an eMMC on mmc0, and querying the DSI panel.
- */
-int rgxx3_detect_device(void)
+int rgxx3_read_board_id(void)
{
u32 adc_info;
- int ret, i;
- int board_id = -ENXIO;
- struct mmc *mmc;
+ int ret;
ret = adc_channel_single_shot("saradc at fe720000", 1, &adc_info);
if (ret) {
@@ -357,16 +378,32 @@ int rgxx3_detect_device(void)
* design calls for no more than a 1% variance on the
* resistor, so assume a +- value of 15 should be enough.
*/
- for (i = 0; i < ARRAY_SIZE(rg3xx_model_details); i++) {
+ for (int i = 0; i < ARRAY_SIZE(rg3xx_model_details); i++) {
u32 adc_min = rg3xx_model_details[i].adc_value - 15;
u32 adc_max = rg3xx_model_details[i].adc_value + 15;
- if (adc_min < adc_info && adc_max > adc_info) {
- board_id = i;
- break;
- }
+ if (adc_min < adc_info && adc_max > adc_info)
+ return i;
}
+ return -ENODEV;
+}
+
+/* Detect which Anbernic RGXX3 device we are using so as to load the
+ * correct devicetree for Linux. Set an environment variable once
+ * found. The detection depends on the value of ADC channel 1 and the
+ * presence of an eMMC on mmc0.
+ */
+int rgxx3_detect_device(void)
+{
+ int ret;
+ int board_id;
+ struct mmc *mmc;
+
+ board_id = rgxx3_read_board_id();
+ if (board_id < 0)
+ return board_id;
+
/*
* Try to access the eMMC on an RG353V, RG353P, or RG Arc D.
* If it's missing, it's an RG353VS, RG353PS, or RG Arc S.
@@ -387,67 +424,87 @@ int rgxx3_detect_device(void)
}
}
- if (board_id < 0)
- return board_id;
+ return board_id;
+}
- env_set("board", rg3xx_model_details[board_id].board);
- env_set("board_name",
- rg3xx_model_details[board_id].board_name);
- env_set("fdtfile", rg3xx_model_details[board_id].fdtfile);
+/*
+ * Check the loaded device tree to set the correct gd->board_type.
+ * Disable the console if the board doesn't support a console.
+ */
+int set_gd_value(void)
+{
+ const char *model;
- /* Skip panel detection for when it is not needed. */
- if (!rg3xx_model_details[board_id].detect_panel)
- return 0;
+ model = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
- /* Warn but don't fail for errors in auto-detection of the panel. */
- ret = rgxx3_detect_display();
- if (ret)
- printf("Failed to detect panel type\n");
+ for (int i = 0; i < ARRAY_SIZE(rg3xx_model_details); i++) {
+ if (strcmp(rg3xx_model_details[i].board_name, model) == 0) {
+ gd->board_type = i;
+ if (!rg3xx_model_details[i].uart_con)
+ gd->flags |= GD_FLG_SILENT |
+ GD_FLG_DISABLE_CONSOLE;
+ return 0;
+ }
+ }
- return 0;
+ return -ENODEV;
}
int rk_board_late_init(void)
{
int ret;
- ret = rgxx3_detect_device();
+ ret = set_gd_value();
if (ret) {
- printf("Unable to detect device type: %d\n", ret);
- return ret;
+ printf("Unable to auto-detect device\n");
+ goto end;
}
+ /*
+ * Change the model number on the RG353M since it uses the same
+ * tree as the RG353P.
+ */
+ if (gd->board_type == RG353P) {
+ ret = rgxx3_read_board_id();
+ if (ret > 0)
+ gd->board_type = ret;
+ }
+
+ env_set("board", rg3xx_model_details[gd->board_type].board);
+ env_set("board_name",
+ rg3xx_model_details[gd->board_type].board_name);
+ env_set("fdtfile", rg3xx_model_details[gd->board_type].fdtfile);
+
+ /*
+ * Skip panel detection if not needed. Warn but don't fail for
+ * errors in auto-detection of the panel.
+ */
+ if (rg3xx_model_details[gd->board_type].detect_panel) {
+ ret = rgxx3_detect_display();
+ if (ret)
+ printf("Failed to detect panel type\n");
+ }
+
+end:
/* Turn off red LED and turn on orange LED. */
writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | GPIO_C6,
(GPIO0_BASE + GPIO_SWPORT_DR_H));
- if (IS_ENABLED(CONFIG_DM_PWM))
- startup_buzz();
+ startup_buzz();
return 0;
}
-int ft_board_setup(void *blob, struct bd_info *bd)
+int rgxx3_panel_fixup(void *blob)
{
const struct rg353_panel *panel = NULL;
- int node, ret, i;
+ int node, ret;
char *env;
- /* No fixups necessary for the RG503 */
- env = env_get("board_name");
- if (env && (!strcmp(env, rg3xx_model_details[RG503].board_name)))
- return 0;
-
- /* Change the model name of the RG353M */
- if (env && (!strcmp(env, rg3xx_model_details[RG353M].board_name)))
- fdt_setprop(blob, 0, "model",
- rg3xx_model_details[RG353M].board_name,
- sizeof(rg3xx_model_details[RG353M].board_name));
-
env = env_get("panel");
if (!env) {
printf("Can't get panel env\n");
- return 0;
+ return -EINVAL;
}
/*
@@ -469,7 +526,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
return 0;
/* Panels don't match, search by first compatible value. */
- for (i = 0; i < ARRAY_SIZE(rg353_panel_details); i++) {
+ for (int i = 0; i < ARRAY_SIZE(rg353_panel_details); i++) {
if (!strcmp(env, rg353_panel_details[i].panel_compat[0])) {
panel = &rg353_panel_details[i];
break;
@@ -489,3 +546,38 @@ int ft_board_setup(void *blob, struct bd_info *bd)
return 0;
}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ int ret;
+
+ if (gd->board_type == RG353M)
+ fdt_setprop(blob, 0, "model",
+ rg3xx_model_details[RG353M].board_name,
+ sizeof(rg3xx_model_details[RG353M].board_name));
+
+ if (rg3xx_model_details[gd->board_type].detect_panel) {
+ ret = rgxx3_panel_fixup(blob);
+ if (ret)
+ printf("Unable to update panel compat\n");
+ }
+
+ return 0;
+}
+
+int board_fit_config_name_match(const char *name)
+{
+ int ret;
+
+ if (gd->board_type == 0) {
+ ret = rgxx3_detect_device();
+ if (ret < 0)
+ return ret;
+ gd->board_type = ret;
+ }
+
+ if (strcmp(name, rg3xx_model_details[gd->board_type].fdtfile) == 0)
+ return 0;
+
+ return -ENXIO;
+}
diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
index a03509bf467..f5e5470df8c 100644
--- a/configs/anbernic-rgxx3-rk3566_defconfig
+++ b/configs/anbernic-rgxx3-rk3566_defconfig
@@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SPL_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="rk3566-anbernic-rgxx3"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3566-anbernic-rg353p"
CONFIG_ROCKCHIP_RK3568=y
CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
CONFIG_SPL_SERIAL=y
@@ -19,8 +19,10 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rgxx3.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rg353p.dtb"
+CONFIG_DISABLE_CONSOLE=y
# CONFIG_CONSOLE_MUX is not set
+CONFIG_BOARD_TYPES=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_RNG_SEED=y
@@ -38,13 +40,14 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-# CONFIG_OF_UPSTREAM is not set
+CONFIG_OF_LIST="rockchip/rk3566-anbernic-rg353p rockchip/rk3566-anbernic-rg353v rockchip/rk3566-anbernic-rg503 rockchip/rk3566-anbernic-rg-arc-d rockchip/rk3566-anbernic-rg353ps rockchip/rk3566-anbernic-rg353vs rockchip/rk3566-anbernic-rg-arc-s rockchip/rk3566-powkiddy-rgb30 rockchip/rk3566-powkiddy-rk2023 rockchip/rk3566-powkiddy-rgb10max3"
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
# CONFIG_NET is not set
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
+CONFIG_SPL_ADC=y
CONFIG_SPL_CLK=y
CONFIG_ARM_SMCCC_FEATURES=y
CONFIG_SCMI_FIRMWARE=y
@@ -70,6 +73,7 @@ CONFIG_SPL_RAM=y
# CONFIG_RAM_ROCKCHIP_DEBUG is not set
# CONFIG_RNG_SMCCC_TRNG is not set
CONFIG_BAUDRATE=1500000
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550_MEM32=y
CONFIG_SYSRESET=y
--
2.34.1
More information about the U-Boot
mailing list