[PATCH v1 03/20] linker: Add SPL linker script for SoC64 devices

tien.fong.chee at intel.com tien.fong.chee at intel.com
Fri Sep 20 09:02:25 CEST 2024


From: Tien Fong Chee <tien.fong.chee at intel.com>

Add a new .data section for preserving the original state of the
.data section of SoC64 SPL. This new .data section is required to
make SPL reentrant after warm reset.

Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
---
 arch/arm/mach-socfpga/u-boot-spl-soc64.lds | 80 ++++++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 arch/arm/mach-socfpga/u-boot-spl-soc64.lds

diff --git a/arch/arm/mach-socfpga/u-boot-spl-soc64.lds b/arch/arm/mach-socfpga/u-boot-spl-soc64.lds
new file mode 100644
index 00000000000..91cf8dd3139
--- /dev/null
+++ b/arch/arm/mach-socfpga/u-boot-spl-soc64.lds
@@ -0,0 +1,80 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua at phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *	Aneesh V <aneesh at ti.com>
+ *
+ * Copyright (C) 2024 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+	__image_copy_start = ADDR(.text);
+	.text : {
+		. = ALIGN(8);
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	} >.sram
+
+	.rodata : {
+		. = ALIGN(8);
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	} >.sram
+
+	.data : {
+		. = ALIGN(8);
+		/* Run time .data section starting at this location */
+		__data_start = .;
+		*(.data*)
+		/* Run time .data section ending at this location */
+		__data_end = .;
+	} >.sram
+
+	. = ALIGN(8);
+	/* Preserve original .data section starting at this location */
+	__preserve_data_start = .;
+	. = __preserve_data_start + (__data_end - __data_start);
+	/* Preserve original .data section ending at this location */
+	__preserve_data_end = .;
+
+	. = ALIGN(8);
+	__u_boot_list . : {
+		KEEP(*(SORT(__u_boot_list*)));
+	} >.sram
+
+	. = ALIGN(8);
+	__image_copy_end = .;
+
+	_end = .;
+
+	_image_binary_end = .;
+
+	.bss : {
+		__bss_start = .;
+		*(.bss*)
+		. = ALIGN(8);
+		__bss_end = .;
+	} >.sdram
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
-- 
2.25.1



More information about the U-Boot mailing list