[PATCH v1 04/20] arm: socfpga: agilex5: Add low level initialization
tien.fong.chee at intel.com
tien.fong.chee at intel.com
Fri Sep 20 09:02:26 CEST 2024
From: Tien Fong Chee <tien.fong.chee at intel.com>
Create new low level initialization for Agile5 due to the new ARM core
composition and warm reset behavior.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
---
arch/arm/mach-socfpga/Makefile | 1 +
.../include/mach/reset_manager_soc64.h | 12 +++-
arch/arm/mach-socfpga/lowlevel_init_agilex5.S | 57 +++++++++++++++++++
3 files changed, 68 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-socfpga/lowlevel_init_agilex5.S
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 67c6a8dfec5..53c91d1d2a5 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -58,6 +58,7 @@ endif
ifdef CONFIG_TARGET_SOCFPGA_AGILEX5
obj-y += clock_manager_agilex5.o
+obj-y += lowlevel_init_agilex5.o
obj-y += mailbox_s10.o
obj-y += misc_soc64.o
obj-y += mmu-arm64_s10.o
diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h b/arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h
index c8bb727aa2b..d373ec0dc70 100644
--- a/arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h
+++ b/arch/arm/mach-socfpga/include/mach/reset_manager_soc64.h
@@ -1,15 +1,17 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright (C) 2016-2019 Intel Corporation <www.intel.com>
+ * Copyright (C) 2016-2024 Intel Corporation <www.intel.com>
*/
#ifndef _RESET_MANAGER_SOC64_H_
#define _RESET_MANAGER_SOC64_H_
+#ifndef __ASSEMBLY__
void reset_deassert_peripherals_handoff(void);
int cpu_has_been_warmreset(void);
void print_reset_info(void);
void socfpga_bridges_reset(int enable);
+#endif
#define RSTMGR_SOC64_STATUS 0x00
#define RSTMGR_SOC64_MPUMODRST 0x20
@@ -23,14 +25,20 @@ void socfpga_bridges_reset(int enable);
#define RSTMGR_BRGMODRST_FPGA2SOC_MASK 0x00000004
/* SDM, Watchdogs and MPU warm reset mask */
-#define RSTMGR_STAT_SDMWARMRST BIT(1)
+#define RSTMGR_STAT_SDMWARMRST 0x2
#define RSTMGR_STAT_MPU0RST_BITPOS 8
#define RSTMGR_STAT_L4WD0RST_BITPOS 16
+#if IS_ENABLED(CONFIG_TARGET_SOCFPGA_AGILEX5)
+#define RSTMGR_STAT_L4WD0RST_BIT 0x1F0000
+#define RSTMGR_L4WD_MPU_WARMRESET_MASK (RSTMGR_STAT_SDMWARMRST | \
+ RSTMGR_STAT_L4WD0RST_BIT)
+#else
#define RSTMGR_L4WD_MPU_WARMRESET_MASK (RSTMGR_STAT_SDMWARMRST | \
GENMASK(RSTMGR_STAT_MPU0RST_BITPOS + 3, \
RSTMGR_STAT_MPU0RST_BITPOS) | \
GENMASK(RSTMGR_STAT_L4WD0RST_BITPOS + 3, \
RSTMGR_STAT_L4WD0RST_BITPOS))
+#endif
/*
* SocFPGA Stratix10 reset IDs, bank mapping is as follows:
diff --git a/arch/arm/mach-socfpga/lowlevel_init_agilex5.S b/arch/arm/mach-socfpga/lowlevel_init_agilex5.S
new file mode 100644
index 00000000000..27430577719
--- /dev/null
+++ b/arch/arm/mach-socfpga/lowlevel_init_agilex5.S
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2024 Intel Corporation. All rights reserved
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/arch/reset_manager_soc64.h>
+#include <asm/macro.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+ mov x29, lr /* Save LR */
+
+ /* Enable Async */
+ msr daifclr, #4
+
+#ifdef CONFIG_SPL_BUILD
+ branch_if_slave x0, 3f
+
+ /* Check rstmgr.stat for warm reset status */
+ ldr w1, =SOCFPGA_RSTMGR_ADDRESS
+ ldr w0, [x1]
+ /* Check whether any L4 watchdogs or SDM had triggered warm reset */
+ ldr x2, =RSTMGR_L4WD_MPU_WARMRESET_MASK
+ ands x0, x0, x2
+ /*
+ * If current Reset Manager's status is warm reset just reload the
+ * .data section by copying the data from data preserve section.
+ * Otherwise, copy the .data section to the data preserve section to
+ * keep an original copy of .data section. This ensure SPL is
+ * reentrant after warm reset.
+ */
+ b.ne reload_data_section
+ /* Copy from .data to preserved .data to backup the SPL state */
+ ldr x0, =__data_start
+ ldr x1, =__preserve_data_start
+ ldr x2, =__preserve_data_end
+ b copy_loop
+reload_data_section:
+ /* Copy from preserved .data to .data to restore the SPL state */
+ ldr x0, =__preserve_data_start
+ ldr x1, =__data_start
+ ldr x2, =__data_end
+copy_loop:
+ ldr w3, [x0]
+ add x0, x0, #4
+ str w3, [x1]
+ add x1, x1, #4
+ cmp x1, x2
+ b.ne copy_loop
+3:
+#endif
+
+ mov lr, x29 /* Restore LR */
+ ret
+ENDPROC(lowlevel_init)
--
2.25.1
More information about the U-Boot
mailing list