[PATCH v1 07/20] arm: dts: agilex5: Add firewall configure settings
tien.fong.chee at intel.com
tien.fong.chee at intel.com
Fri Sep 20 09:02:29 CEST 2024
From: Tien Fong Chee <tien.fong.chee at intel.com>
These firewall configure settings are needed to disable firewall on
respective hardware component so both secure and non-secure transactions
are allowed.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
---
arch/arm/dts/socfpga_agilex5-u-boot.dtsi | 166 +++++++++++++++++++++++
1 file changed, 166 insertions(+)
diff --git a/arch/arm/dts/socfpga_agilex5-u-boot.dtsi b/arch/arm/dts/socfpga_agilex5-u-boot.dtsi
index ec42fd01a9c..bf30b3b8858 100644
--- a/arch/arm/dts/socfpga_agilex5-u-boot.dtsi
+++ b/arch/arm/dts/socfpga_agilex5-u-boot.dtsi
@@ -221,6 +221,172 @@
bootph-all;
};
};
+
+ socfpga_firewall_config: socfpga-firewall-config {
+ compatible = "intel,socfpga-dtreg";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bootph-all;
+
+ /* L4 peripherals firewall */
+ noc_fw_l4_per at 10d21000 {
+ reg = <0x10d21000 0x0000008c>;
+ intel,offset-settings =
+ /* NAND */
+ <0x00000000 0x01010001 0x01010001>,
+ /* USB0 */
+ <0x0000000c 0x01010001 0x01010001>,
+ /* USB1 */
+ <0x00000010 0x01010001 0x01010001>,
+ /* SPI_MAIN0 */
+ <0x0000001c 0x01010301 0x01010301>,
+ /* SPI_MAIN1 */
+ <0x00000020 0x01010301 0x01010301>,
+ /* SPI_SECONDARY0 */
+ <0x00000024 0x01010301 0x01010301>,
+ /* SPI_SECONDARY1 */
+ <0x00000028 0x01010301 0x01010301>,
+ /* EMAC0 */
+ <0x0000002c 0x01010001 0x01010001>,
+ /* EMAC1 */
+ <0x00000030 0x01010001 0x01010001>,
+ /* EMAC2 */
+ <0x00000034 0x01010001 0x01010001>,
+ /* SDMMC */
+ <0x00000040 0x01010001 0x01010001>,
+ /* GPIO0 */
+ <0x00000044 0x01010301 0x01010301>,
+ /* GPIO1 */
+ <0x00000048 0x01010301 0x01010301>,
+ /* I2C0 */
+ <0x00000050 0x01010301 0x01010301>,
+ /* I2C1 */
+ <0x00000054 0x01010301 0x01010301>,
+ /* I2C2 */
+ <0x00000058 0x01010301 0x01010301>,
+ /* I2C3 */
+ <0x0000005c 0x01010301 0x01010301>,
+ /* I2C4 */
+ <0x00000060 0x01010301 0x01010301>,
+ /* SP_TIMER0 */
+ <0x00000064 0x01010301 0x01010301>,
+ /* SP_TIMER1 */
+ <0x00000068 0x01010301 0x01010301>,
+ /* UART0 */
+ <0x0000006c 0x01010301 0x01010301>,
+ /* UART1 */
+ <0x00000070 0x01010301 0x01010301>,
+ /* I3C0 */
+ <0x00000074 0x01010301 0x01010301>,
+ /* I3C1 */
+ <0x00000078 0x01010301 0x01010301>,
+ /* DMA0 */
+ <0x0000007c 0x01010001 0x01010001>,
+ /* DMA1 */
+ <0x00000080 0x01010001 0x01010001>,
+ /* COMBO_PHY */
+ <0x00000084 0x01010001 0x01010001>,
+ /* NAND_SDMA */
+ <0x00000088 0x01010301 0x01010301>;
+ bootph-all;
+ };
+
+ /* L4 system firewall */
+ noc_fw_l4_sys at 10d21100 {
+ reg = <0x10d21100 0x00000098>;
+ intel,offset-settings =
+ /* DMA_ECC */
+ <0x00000008 0x01010001 0x01010001>,
+ /* EMAC0RX_ECC */
+ <0x0000000c 0x01010001 0x01010001>,
+ /* EMAC0TX_ECC */
+ <0x00000010 0x01010001 0x01010001>,
+ /* EMAC1RX_ECC */
+ <0x00000014 0x01010001 0x01010001>,
+ /* EMAC1TX_ECC */
+ <0x00000018 0x01010001 0x01010001>,
+ /* EMAC2RX_ECC */
+ <0x0000001c 0x01010001 0x01010001>,
+ /* EMAC2TX_ECC */
+ <0x00000020 0x01010001 0x01010001>,
+ /* NAND_ECC */
+ <0x0000002c 0x01010001 0x01010001>,
+ /* NAND_READ_ECC */
+ <0x00000030 0x01010001 0x01010001>,
+ /* NAND_WRITE_ECC */
+ <0x00000034 0x01010001 0x01010001>,
+ /* OCRAM_ECC */
+ <0x00000038 0x01010001 0x01010001>,
+ /* SDMMC_ECC */
+ <0x00000040 0x01010001 0x01010001>,
+ /* USB0_ECC */
+ <0x00000044 0x01010001 0x01010001>,
+ /* USB1_CACHEECC */
+ <0x00000048 0x01010001 0x01010001>,
+ /* CLOCK_MANAGER */
+ <0x0000004c 0x01010001 0x01010001>,
+ /* IO_MANAGER */
+ <0x00000054 0x01010001 0x01010001>,
+ /* RESET_MANAGER */
+ <0x00000058 0x01010001 0x01010001>,
+ /* SYSTEM_MANAGER */
+ <0x0000005c 0x01010001 0x01010001>,
+ /* OSC0_TIMER */
+ <0x00000060 0x01010301 0x01010301>,
+ /* OSC1_TIMER0*/
+ <0x00000064 0x01010301 0x01010301>,
+ /* WATCHDOG0 */
+ <0x00000068 0x01010301 0x01010301>,
+ /* WATCHDOG1 */
+ <0x0000006c 0x01010301 0x01010301>,
+ /* WATCHDOG2 */
+ <0x00000070 0x01010301 0x01010301>,
+ /* WATCHDOG3 */
+ <0x00000074 0x01010301 0x01010301>,
+ /* DAP */
+ <0x00000078 0x03010001 0x03010001>,
+ /* WATCHDOG4 */
+ <0x0000007c 0x01010301 0x01010301>,
+ /* POWER_MANAGER */
+ <0x00000080 0x01010001 0x01010001>,
+ /* USB1_RXECC */
+ <0x00000084 0x01010001 0x01010001>,
+ /* USB1_TXECC */
+ <0x00000088 0x01010001 0x01010001>,
+ /* L4_NOC_PROBES */
+ <0x00000090 0x01010001 0x01010001>,
+ /* L4_NOC_QOS */
+ <0x00000094 0x01010001 0x01010001>;
+ bootph-all;
+ };
+
+ /* Light weight SoC2FPGA */
+ noc_fw_lwsoc2fpga at 10d21300 {
+ reg = <0x10d21300 0x0000004>;
+ intel,offset-settings =
+ /* LWSOC2FPGA_CSR */
+ <0x00000000 0x0ffe0301 0x0ffe0301>;
+ bootph-all;
+ };
+
+ /* SoC2FPGA */
+ noc_fw_soc2fpga at 10d21200 {
+ reg = <0x10d21200 0x0000004>;
+ intel,offset-settings =
+ /* SOC2FPGA_CSR */
+ <0x00000000 0x0ffe0301 0x0ffe0301>;
+ bootph-all;
+ };
+
+ /* TCU */
+ noc_fw_tcu at 10d21400 {
+ reg = <0x10d21400 0x0000004>;
+ intel,offset-settings =
+ /* TCU_CSR */
+ <0x00000000 0x01010001 0x01010001>;
+ bootph-all;
+ };
+ };
};
};
--
2.25.1
More information about the U-Boot
mailing list