[PATCH] xilinx: zynqmp: Add bootmenu support

[Michal Simek]

On 9/11/24 10:04, Michal Simek wrote:
> From: John Vicky Vykuntapu <johnvicky.vykuntapu at amd.com>
> 
> Popup the bootmenu for 5 sec with default boot options to CC on AMD CCs and
> default to SOM on others.
> Users can anytime disable the bootmenu by setting the variable
> enable_bootmenu=0 in zynqmp_kria.env or setup it up at run time and save
> variables to NV memory.
> 
> The patch is also fixing issue created by commit 4c7363068651 ("cmd:
> setexpr: fix no matching string in gsub return empty value") which has
> changed return value from setexpr command (Before this commit when
> matching string wasn't found command return 1 that's why was possible to
> use with if).
> 
> Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu at amd.com>
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
> 
>   board/xilinx/zynqmp/zynqmp_kria.env | 12 +++++++++++-
>   1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env
> index 49ef3e7d7532..d0e431ebb46f 100644
> --- a/board/xilinx/zynqmp/zynqmp_kria.env
> +++ b/board/xilinx/zynqmp/zynqmp_kria.env
> @@ -49,9 +49,19 @@ usb_boot_devices='usb0 usb1 usb2 usb3 usb4'
>   som_cc_boot=if test ${card1_name} = SCK-KV-G; then setenv boot_targets mmc1 ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; elif test ${card1_name} = SCK-KR-G; then setenv boot_targets ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; else test ${card1_name} = SCK-KD-G; setenv boot_targets ${usb_boot_devices} pxe dhcp jtag && run distro_bootcmd; fi;"
>   som_mmc_boot=setenv boot_targets mmc0 && run distro_bootcmd
>   
> +# To disable bootmenu set enable_bootmenu=0
> +enable_bootmenu=1
> +check_cc_for_default_boot=if test ${card1_name} = SCK-KV-G || test ${card1_name} = SCK-KR-G || test ${card1_name} = SCK-KD-G; then setenv bootmenu_default 1; else setenv bootmenu_default 0; fi
> +som_bootmenu=if test ${enable_bootmenu} = 1; then run check_cc_for_default_boot; bootmenu; else run som_mmc_boot; fi
> +
>   k26_starter=SMK-K26-XCL2G
>   k24_starter=SMK-K24-XCL2G
> -bootcmd=setenv model $board_name && if setexpr model gsub .*$k24_starter* $k24_starter || setexpr model gsub .*$k26_starter* $k26_starter; then run som_cc_boot; else run som_mmc_boot; run som_cc_boot; fi
> +bootcmd=setenv model $board_name; setexpr model gsub ".*${k24_starter}.*" starter; setexpr model gsub ".*${k26_starter}.*" starter; if test ${model} = "starter"; then run som_cc_boot; else run som_bootmenu; fi
> +
> +# Boot menu
> +bootmenu_0=eMMC Boot=run som_mmc_boot
> +bootmenu_1=SD Boot=run som_cc_boot
> +bootmenu_delay=5
>   
>   usb_hub_init=mw 1000 0056 && sleep 1 && i2c write 1000 2d aa 2 -s
>   

Applied.
M