[PATCH v4 07/11] mtd: implement support for LED activity

[Christian Marangi]

On Sat, Sep 21, 2024 at 12:13:34PM +0200, Miquel Raynal wrote:
> Hi Christian,
> 
> ansuelsmth at gmail.com wrote on Sat, 21 Sep 2024 00:50:00 +0200:
> 
> > Implement support for LED activity. If the feature is enabled,
> > make the defined ACTIVITY LED to signal mtd write or erase operations.
> 
> I'm curious, why did you not consider reads in your proposal? I think
> in general as long as you use a device the LED should blink. While
> you're performing a read you cannot do anything else with the chip so I
> would definitely consider the read path as well.
> 
> Also, I would expect the blinking to continue when the device is
> accessed, no matter who is asking for it. So for instance when I load
> my kernel into RAM, I believe it should blink. Hence, why not
> considering the mtd layer rather than the command .c file?
>

My idea for the feature was really for recovery and flashing usage, soo
everything that is initiated by the user or that does change thing.

Example a button trigger an automatic recovery procedure from an
attached USB drive. Having the LED blink signal the user the procedure
is actually working and something is happening.

But yes yours is not a bad idea, I don't think it would make a recovery
procedure confusing, lets see if others agree on that ok?

> > 
> > Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
> > ---
> >  cmd/mtd.c | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/cmd/mtd.c b/cmd/mtd.c
> > index 795aaa2b37d..dae90b0e6e4 100644
> > --- a/cmd/mtd.c
> > +++ b/cmd/mtd.c
> 
> Thanks,
> Miquèl

-- 
	Ansuel