[PATCH 1/1] rpi: Fix build error when CONFIG_VIDEO is disabled for Raspberry Pi

[Devarsh Thakkar]

Hi Martin,

On 26/09/24 17:56, Martin Stolpe wrote:
> Hi,
> 
> Am Di., 24. Sept. 2024 um 08:38 Uhr schrieb Devarsh Thakkar
> <devarsht at ti.com <mailto:devarsht at ti.com>>:
> 
> 
>     CONFIG_FDT_SIMPLEFB is only used in splash-screen context which in-turn
>     depends on CONFIG_VIDEO. So CONFIG_FDT_SIMPLEFB is in a way dependent on
>     CONFIG_VIDEO. We had fixed similar issue in past in vendor tree and
>     by making
>     CONFIG_FDT_SIMPLEFB dependent on CONFIG_VIDEO using below set of
>     patches [1]
>     which I was planning to post upstream too.
> 
>     Kindly let me know If these patches look good to you and fix your
>     problem too,
>     I can post same set of patches to upstream too.
> 
>     [1] :
>     https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2024.04&id=1199800505f11f2162030cb641c6d0c9276d5c9c <https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2024.04&id=1199800505f11f2162030cb641c6d0c9276d5c9c>
>     [2] :
>     https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2024.04&id=5b4b8eac243cbd86286ff2cf57ca0469c4d86345 <https://git.ti.com/cgit/ti-u-boot/ti-u-boot/commit/?h=ti-u-boot-2024.04&id=5b4b8eac243cbd86286ff2cf57ca0469c4d86345>
> 
> 
> These patches look good to me.
> 

Thanks for taking a look, I have posted them to the list [1], it would
be great if you could provide a Reviewed-by or Tested-by too.

> If I understand the code correctly the frame buffer node should only be
> created if CONFIG_FDT_SIMPLEFB is enabled. Thus I would change the code
> like this:
> 

Yes, that's true, I think you also need to conditionally compile
ft_board_setup only when CONFIG_OF_BOARD_SETUP is enabled.

[1]: https://lore.kernel.org/all/20240925151354.480704-4-devarsht@ti.com/

Regards
Devarsh