[PATCH 14/27] misc: status_led: Delete driver

[Simon Glass]

This driver is not used anymore. Drop it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/misc/Makefile     |   1 -
 drivers/misc/status_led.c | 124 --------------------------------------
 2 files changed, 125 deletions(-)
 delete mode 100644 drivers/misc/status_led.c

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 03d87ef8a0e..cf6ece919bc 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -48,7 +48,6 @@ obj-$(CONFIG_$(SPL_)I2C_EEPROM) += i2c_eeprom.o
 obj-$(CONFIG_IHS_FPGA) += ihs_fpga.o
 obj-$(CONFIG_IMX8) += imx8/
 obj-$(CONFIG_IMX_ELE) += imx_ele/
-obj-$(CONFIG_LED_STATUS) += status_led.o
 obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o
 obj-$(CONFIG_$(SPL_TPL_)LS2_SFP) += ls2_sfp.o
 obj-$(CONFIG_$(SPL_)MXC_OCOTP) += mxc_ocotp.o
diff --git a/drivers/misc/status_led.c b/drivers/misc/status_led.c
deleted file mode 100644
index 3b1baa4f840..00000000000
--- a/drivers/misc/status_led.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- */
-
-#include <status_led.h>
-#include <linux/types.h>
-
-/*
- * The purpose of this code is to signal the operational status of a
- * target which usually boots over the network; while running in
- * U-Boot, a status LED is blinking. As soon as a valid BOOTP reply
- * message has been received, the LED is turned off. The Linux
- * kernel, once it is running, will start blinking the LED again,
- * with another frequency.
- */
-
-/* ------------------------------------------------------------------------- */
-
-typedef struct {
-	led_id_t mask;
-	int state;
-	int period;
-	int cnt;
-} led_dev_t;
-
-led_dev_t led_dev[] = {
-	{	CONFIG_LED_STATUS_BIT,
-		CONFIG_LED_STATUS_STATE,
-		LED_STATUS_PERIOD,
-		0,
-	},
-#if defined(CONFIG_LED_STATUS1)
-	{	CONFIG_LED_STATUS_BIT1,
-		CONFIG_LED_STATUS_STATE1,
-		LED_STATUS_PERIOD1,
-		0,
-	},
-#endif
-#if defined(CONFIG_LED_STATUS2)
-	{	CONFIG_LED_STATUS_BIT2,
-		CONFIG_LED_STATUS_STATE2,
-		LED_STATUS_PERIOD2,
-		0,
-	},
-#endif
-#if defined(CONFIG_LED_STATUS3)
-	{	CONFIG_LED_STATUS_BIT3,
-		CONFIG_LED_STATUS_STATE3,
-		LED_STATUS_PERIOD3,
-		0,
-	},
-#endif
-#if defined(CONFIG_LED_STATUS4)
-	{	CONFIG_LED_STATUS_BIT4,
-		CONFIG_LED_STATUS_STATE4,
-		LED_STATUS_PERIOD4,
-		0,
-	},
-#endif
-#if defined(CONFIG_LED_STATUS5)
-	{	CONFIG_LED_STATUS_BIT5,
-		CONFIG_LED_STATUS_STATE5,
-		LED_STATUS_PERIOD5,
-		0,
-	},
-#endif
-};
-
-#define MAX_LED_DEV	(sizeof(led_dev)/sizeof(led_dev_t))
-
-static int status_led_init_done = 0;
-
-void status_led_init(void)
-{
-	led_dev_t *ld;
-	int i;
-
-	for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++)
-		__led_init (ld->mask, ld->state);
-	status_led_init_done = 1;
-}
-
-void status_led_tick(ulong timestamp)
-{
-	led_dev_t *ld;
-	int i;
-
-	if (!status_led_init_done)
-		status_led_init();
-
-	for (i = 0, ld = led_dev; i < MAX_LED_DEV; i++, ld++) {
-
-		if (ld->state != CONFIG_LED_STATUS_BLINKING)
-			continue;
-
-		if (++ld->cnt >= ld->period) {
-			__led_toggle (ld->mask);
-			ld->cnt -= ld->period;
-		}
-
-	}
-}
-
-void status_led_set(int led, int state)
-{
-	led_dev_t *ld;
-
-	if (led < 0 || led >= MAX_LED_DEV)
-		return;
-
-	if (!status_led_init_done)
-		status_led_init();
-
-	ld = &led_dev[led];
-
-	ld->state = state;
-	if (state == CONFIG_LED_STATUS_BLINKING) {
-		ld->cnt = 0;		/* always start with full period    */
-		state = CONFIG_LED_STATUS_ON;	/* always start with LED _ON_ */
-	}
-	__led_set (ld->mask, state);
-}
-- 
2.43.0