[PATCH v2 2/6] treewide: bcb: move ab_select command to bcb subcommands
Mattijs Korpershoek
mkorpershoek at baylibre.com
Mon Sep 30 13:24:21 CEST 2024
Hi Dmitry,
Thank you for the patch.
On jeu., sept. 12, 2024 at 00:49, Dmitry Rokosov <ddrokosov at salutedevices.com> wrote:
> To enhance code organization, it is beneficial to consolidate all A/B
> BCB management routines into a single super-command.
> The 'bcb' command is an excellent candidate for this purpose.
>
> This patch integrates the separate 'ab_select' command into the 'bcb'
> group as the 'ab_select' subcommand, maintaining the same parameter list
> for consistency.
>
> Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
> ---
> MAINTAINERS | 1 -
> cmd/Kconfig | 15 +----
> cmd/Makefile | 1 -
> cmd/ab_select.c | 66 --------------------
> cmd/bcb.c | 73 +++++++++++++++++++----
> configs/am57xx_hs_evm_usb_defconfig | 1 -
> configs/khadas-vim3_android_ab_defconfig | 1 -
> configs/khadas-vim3l_android_ab_defconfig | 1 -
> configs/sandbox64_defconfig | 4 +-
> configs/sandbox_defconfig | 4 +-
> doc/android/ab.rst | 12 ++--
> include/configs/khadas-vim3_android.h | 2 +-
> include/configs/khadas-vim3l_android.h | 2 +-
> include/configs/meson64_android.h | 4 +-
> include/configs/ti_omap5_common.h | 4 +-
> test/py/tests/test_android/test_ab.py | 8 +--
> 16 files changed, 84 insertions(+), 115 deletions(-)
> delete mode 100644 cmd/ab_select.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2050ae24df82..876330d2d750 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -65,7 +65,6 @@ R: Sam Protsenko <semen.protsenko at linaro.org>
> S: Maintained
> T: git https://source.denx.de/u-boot/custodians/u-boot-dfu.git
> F: boot/android_ab.c
> -F: cmd/ab_select.c
> F: doc/android/ab.rst
> F: include/android_ab.h
> F: test/py/tests/test_android/test_ab.py
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 978f44eda426..eb0fb07b426a 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -1053,6 +1053,7 @@ config CMD_ADC
> config CMD_BCB
> bool "bcb"
> depends on PARTITIONS
> + depends on ANDROID_AB
> help
> Read/modify/write the fields of Bootloader Control Block, usually
> stored on the flash "misc" partition with its structure defined in:
> @@ -1766,20 +1767,6 @@ config CMD_XXD
>
> endmenu
>
> -menu "Android support commands"
> -
> -config CMD_AB_SELECT
> - bool "ab_select"
> - depends on ANDROID_AB
> - help
> - On Android devices with more than one boot slot (multiple copies of
> - the kernel and system images) this provides a command to select which
> - slot should be used to boot from and register the boot attempt. This
> - is used by the new A/B update model where one slot is updated in the
> - background while running from the other slot.
> -
> -endmenu
> -
> if NET
>
> menuconfig CMD_NET
> diff --git a/cmd/Makefile b/cmd/Makefile
> index 87133cc27a8a..281c13220e95 100644
> --- a/cmd/Makefile
> +++ b/cmd/Makefile
> @@ -17,7 +17,6 @@ obj-$(CONFIG_CMD_2048) += 2048.o
> obj-$(CONFIG_CMD_ACPI) += acpi.o
> obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
> obj-$(CONFIG_CMD_AES) += aes.o
> -obj-$(CONFIG_CMD_AB_SELECT) += ab_select.o
> obj-$(CONFIG_CMD_ADC) += adc.o
> obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
> obj-$(CONFIG_BLK) += blk_common.o
> diff --git a/cmd/ab_select.c b/cmd/ab_select.c
> deleted file mode 100644
> index 7c178c728ca4..000000000000
> --- a/cmd/ab_select.c
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -// SPDX-License-Identifier: BSD-2-Clause
> -/*
> - * Copyright (C) 2017 The Android Open Source Project
> - */
> -
> -#include <android_ab.h>
> -#include <command.h>
> -#include <env.h>
> -#include <part.h>
> -
> -static int do_ab_select(struct cmd_tbl *cmdtp, int flag, int argc,
> - char *const argv[])
> -{
> - int ret;
> - struct blk_desc *dev_desc;
> - struct disk_partition part_info;
> - char slot[2];
> - bool dec_tries = true;
> -
> - if (argc < 4)
> - return CMD_RET_USAGE;
> -
> - for (int i = 4; i < argc; i++) {
> - if (strcmp(argv[i], "--no-dec") == 0) {
> - dec_tries = false;
> - } else {
> - return CMD_RET_USAGE;
> - }
> - }
> -
> - /* Lookup the "misc" partition from argv[2] and argv[3] */
> - if (part_get_info_by_dev_and_name_or_num(argv[2], argv[3],
> - &dev_desc, &part_info,
> - false) < 0) {
> - return CMD_RET_FAILURE;
> - }
> -
> - ret = ab_select_slot(dev_desc, &part_info, dec_tries);
> - if (ret < 0) {
> - printf("Android boot failed, error %d.\n", ret);
> - return CMD_RET_FAILURE;
> - }
> -
> - /* Android standard slot names are 'a', 'b', ... */
> - slot[0] = BOOT_SLOT_NAME(ret);
> - slot[1] = '\0';
> - env_set(argv[1], slot);
> - printf("ANDROID: Booting slot: %s\n", slot);
> - return CMD_RET_SUCCESS;
> -}
> -
> -U_BOOT_CMD(ab_select, 5, 0, do_ab_select,
> - "Select the slot used to boot from and register the boot attempt.",
> - "<slot_var_name> <interface> <dev[:part|#part_name]> [--no-dec]\n"
> - " - Load the slot metadata from the partition 'part' on\n"
> - " device type 'interface' instance 'dev' and store the active\n"
> - " slot in the 'slot_var_name' variable. This also updates the\n"
> - " Android slot metadata with a boot attempt, which can cause\n"
> - " successive calls to this function to return a different result\n"
> - " if the returned slot runs out of boot attempts.\n"
> - " - If 'part_name' is passed, preceded with a # instead of :, the\n"
> - " partition name whose label is 'part_name' will be looked up in\n"
> - " the partition table. This is commonly the \"misc\" partition.\n"
> - " - If '--no-dec' is set, the number of tries remaining will not\n"
> - " decremented for the selected boot slot\n"
> -);
> diff --git a/cmd/bcb.c b/cmd/bcb.c
> index 97a96c009641..a56535a743c0 100644
> --- a/cmd/bcb.c
> +++ b/cmd/bcb.c
> @@ -8,6 +8,7 @@
> #include <android_bootloader_message.h>
> #include <bcb.h>
> #include <command.h>
> +#include <android_ab.h>
> #include <display_options.h>
> #include <log.h>
> #include <part.h>
> @@ -23,6 +24,7 @@ enum bcb_cmd {
> BCB_CMD_FIELD_TEST,
> BCB_CMD_FIELD_DUMP,
> BCB_CMD_STORE,
> + BCB_CMD_AB_SELECT,
> };
>
> static const char * const fields[] = {
> @@ -52,6 +54,8 @@ static int bcb_cmd_get(char *cmd)
> return BCB_CMD_STORE;
> if (!strcmp(cmd, "dump"))
> return BCB_CMD_FIELD_DUMP;
> + if (!strcmp(cmd, "ab_select"))
> + return BCB_CMD_AB_SELECT;
> else
> return -1;
> }
> @@ -85,6 +89,10 @@ static int bcb_is_misused(int argc, char *const argv[])
> if (argc != 2)
> goto err;
> break;
> + case BCB_CMD_AB_SELECT:
> + if (argc != 4 && argc != 5)
> + goto err;
> + return 0;
> default:
> printf("Error: 'bcb %s' not supported\n", argv[0]);
> return -1;
> @@ -414,6 +422,44 @@ void bcb_reset(void)
> __bcb_reset();
> }
>
> +static int do_bcb_ab_select(struct cmd_tbl *cmdtp, int flag, int argc,
> + char * const argv[])
> +{
> + int ret;
> + struct blk_desc *dev_desc;
> + struct disk_partition part_info;
> + char slot[2];
> + bool dec_tries = true;
> +
> + for (int i = 4; i < argc; i++) {
> + if (strcmp(argv[i], "--no-dec") == 0)
> + dec_tries = false;
> + else
> + return CMD_RET_USAGE;
> + }
> +
> + /* Lookup the "misc" partition from argv[2] and argv[3] */
> + if (part_get_info_by_dev_and_name_or_num(argv[2], argv[3],
> + &dev_desc, &part_info,
> + false) < 0) {
> + return CMD_RET_FAILURE;
> + }
> +
> + ret = ab_select_slot(dev_desc, &part_info, dec_tries);
> + if (ret < 0) {
> + printf("Android boot failed, error %d.\n", ret);
> + return CMD_RET_FAILURE;
> + }
> +
> + /* Android standard slot names are 'a', 'b', ... */
> + slot[0] = BOOT_SLOT_NAME(ret);
> + slot[1] = '\0';
> + env_set(argv[1], slot);
> + printf("ANDROID: Booting slot: %s\n", slot);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> static struct cmd_tbl cmd_bcb_sub[] = {
> U_BOOT_CMD_MKENT(load, CONFIG_SYS_MAXARGS, 1, do_bcb_load, "", ""),
> U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 1, do_bcb_set, "", ""),
> @@ -421,6 +467,8 @@ static struct cmd_tbl cmd_bcb_sub[] = {
> U_BOOT_CMD_MKENT(test, CONFIG_SYS_MAXARGS, 1, do_bcb_test, "", ""),
> U_BOOT_CMD_MKENT(dump, CONFIG_SYS_MAXARGS, 1, do_bcb_dump, "", ""),
> U_BOOT_CMD_MKENT(store, CONFIG_SYS_MAXARGS, 1, do_bcb_store, "", ""),
> + U_BOOT_CMD_MKENT(ab_select, CONFIG_SYS_MAXARGS, 1,
> + do_bcb_ab_select, "", ""),
> };
>
> static int do_bcb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
> @@ -460,15 +508,18 @@ U_BOOT_CMD(
> "bcb dump <field> - dump BCB <field>\n"
> "bcb store - store BCB back to <interface>\n"
> "\n"
> - "Legend:\n"
> - "<interface> - storage device interface (virtio, mmc, etc)\n"
> - "<dev> - storage device index containing the BCB partition\n"
> - "<part> - partition index or name containing the BCB\n"
> - "<field> - one of {command,status,recovery,stage,reserved}\n"
> - "<op> - the binary operator used in 'bcb test':\n"
> - " '=' returns true if <val> matches the string stored in <field>\n"
> - " '~' returns true if <val> matches a subset of <field>'s string\n"
> - "<val> - string/text provided as input to bcb {set,test}\n"
> - " NOTE: any ':' character in <val> will be replaced by line feed\n"
> - " during 'bcb set' and used as separator by upper layers\n"
Why does the "Legend:" block gets removed? Is it no longer relevant?
To me, we should keep this block, moving it below "bcb ab_select"
> + "bcb ab_select -\n"
> + " Select the slot used to boot from and register the boot attempt.\n"
> + " <slot_var_name> <interface> <dev[:part|#part_name]> [--no-dec]\n"
> + " - Load the slot metadata from the partition 'part' on\n"
> + " device type 'interface' instance 'dev' and store the active\n"
> + " slot in the 'slot_var_name' variable. This also updates the\n"
> + " Android slot metadata with a boot attempt, which can cause\n"
> + " successive calls to this function to return a different result\n"
> + " if the returned slot runs out of boot attempts.\n"
> + " - If 'part_name' is passed, preceded with a # instead of :, the\n"
> + " partition name whose label is 'part_name' will be looked up in\n"
> + " the partition table. This is commonly the \"misc\" partition.\n"
> + " - If '--no-dec' is set, the number of tries remaining will not\n"
> + " decremented for the selected boot slot\n"
> );
> diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig
> index 807e1d66a6d7..6d822b021768 100644
> --- a/configs/am57xx_hs_evm_usb_defconfig
> +++ b/configs/am57xx_hs_evm_usb_defconfig
> @@ -50,7 +50,6 @@ CONFIG_CMD_ADTIMG=y
> CONFIG_CMD_ABOOTIMG=y
> CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
> CONFIG_CMD_BCB=y
> -CONFIG_CMD_AB_SELECT=y
> CONFIG_BOOTP_DNS2=y
> # CONFIG_CMD_PMIC is not set
> CONFIG_CMD_AVB=y
> diff --git a/configs/khadas-vim3_android_ab_defconfig b/configs/khadas-vim3_android_ab_defconfig
> index 37b8d6a9256b..5281c426cb73 100644
> --- a/configs/khadas-vim3_android_ab_defconfig
> +++ b/configs/khadas-vim3_android_ab_defconfig
> @@ -47,7 +47,6 @@ CONFIG_CMD_SPI=y
> CONFIG_CMD_USB=y
> CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_AB_SELECT=y
> CONFIG_CMD_REGULATOR=y
> CONFIG_CMD_AVB=y
> CONFIG_OF_CONTROL=y
> diff --git a/configs/khadas-vim3l_android_ab_defconfig b/configs/khadas-vim3l_android_ab_defconfig
> index 95e70275cc4f..ff3001b78fa2 100644
> --- a/configs/khadas-vim3l_android_ab_defconfig
> +++ b/configs/khadas-vim3l_android_ab_defconfig
> @@ -47,7 +47,6 @@ CONFIG_CMD_SPI=y
> CONFIG_CMD_USB=y
> CONFIG_CMD_USB_MASS_STORAGE=y
> # CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_AB_SELECT=y
> CONFIG_CMD_REGULATOR=y
> CONFIG_CMD_AVB=y
> CONFIG_OF_CONTROL=y
> diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
> index dd0582d2a0c0..635753f00b73 100644
> --- a/configs/sandbox64_defconfig
> +++ b/configs/sandbox64_defconfig
> @@ -25,6 +25,7 @@ CONFIG_CONSOLE_RECORD=y
> CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000
> CONFIG_PRE_CONSOLE_BUFFER=y
> CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_ANDROID_AB=y
> CONFIG_CMD_CPU=y
> CONFIG_CMD_LICENSE=y
> CONFIG_CMD_BOOTZ=y
> @@ -44,6 +45,7 @@ CONFIG_CMD_MD5SUM=y
> CONFIG_CMD_MEMINFO=y
> CONFIG_CMD_MX_CYCLIC=y
> CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_BCB=y
> CONFIG_CMD_DEMO=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> @@ -167,8 +169,8 @@ CONFIG_PWRSEQ=y
> CONFIG_I2C_EEPROM=y
> CONFIG_MMC_SANDBOX=y
> CONFIG_DM_MTD=y
> -CONFIG_MTD_RAW_NAND=y
> CONFIG_SYS_MAX_NAND_DEVICE=8
> +CONFIG_MTD_RAW_NAND=y
> CONFIG_SYS_NAND_USE_FLASH_BBT=y
> CONFIG_NAND_SANDBOX=y
> CONFIG_SYS_NAND_ONFI_DETECTION=y
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index dc5fcdbd1c9e..cb69554a7306 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -66,6 +66,7 @@ CONFIG_CMD_MEMINFO=y
> CONFIG_CMD_MEM_SEARCH=y
> CONFIG_CMD_MX_CYCLIC=y
> CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_BCB=y
> CONFIG_CMD_DEMO=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPIO_READ=y
> @@ -93,7 +94,6 @@ CONFIG_CMD_AXI=y
> CONFIG_CMD_CAT=y
> CONFIG_CMD_SETEXPR_FMT=y
> CONFIG_CMD_XXD=y
> -CONFIG_CMD_AB_SELECT=y
> CONFIG_CMD_DHCP6=y
> CONFIG_BOOTP_DNS2=y
> CONFIG_CMD_PCAP=y
> @@ -219,8 +219,8 @@ CONFIG_MMC_PCI=y
> CONFIG_MMC_SANDBOX=y
> CONFIG_MMC_SDHCI=y
> CONFIG_DM_MTD=y
> -CONFIG_MTD_RAW_NAND=y
> CONFIG_SYS_MAX_NAND_DEVICE=8
> +CONFIG_MTD_RAW_NAND=y
> CONFIG_SYS_NAND_USE_FLASH_BBT=y
> CONFIG_NAND_SANDBOX=y
> CONFIG_SYS_NAND_ONFI_DETECTION=y
> diff --git a/doc/android/ab.rst b/doc/android/ab.rst
> index 2adf88781d60..7fd4aeb6a724 100644
> --- a/doc/android/ab.rst
> +++ b/doc/android/ab.rst
> @@ -18,7 +18,7 @@ The A/B updates support can be activated by specifying next options in
> your board configuration file::
>
> CONFIG_ANDROID_AB=y
> - CONFIG_CMD_AB_SELECT=y
> + CONFIG_CMD_BCB=y
>
> The disk space on target device must be partitioned in a way so that each
> partition which needs to be updated has two or more instances. The name of
> @@ -26,8 +26,8 @@ each instance must be formed by adding suffixes: ``_a``, ``_b``, ``_c``, etc.
> For example: ``boot_a``, ``boot_b``, ``system_a``, ``system_b``, ``vendor_a``,
> ``vendor_b``.
>
> -As a result you can use ``ab_select`` command to ensure A/B boot process in your
> -boot script. This command analyzes and processes A/B metadata stored on a
> +As a result you can use ``bcb ab_select`` command to ensure A/B boot process in
> +your boot script. This command analyzes and processes A/B metadata stored on a
> special partition (e.g. ``misc``) and determines which slot should be used for
> booting up.
>
> @@ -42,15 +42,15 @@ Command usage
>
> .. code-block:: none
>
> - ab_select <slot_var_name> <interface> <dev[:part_number|#part_name]>
> + bcb ab_select <slot_var_name> <interface> <dev[:part_number|#part_name]>
>
> for example::
>
> - => ab_select slot_name mmc 1:4
> + => bcb ab_select slot_name mmc 1:4
>
> or::
>
> - => ab_select slot_name mmc 1#misc
> + => bcb ab_select slot_name mmc 1#misc
>
> Result::
>
> diff --git a/include/configs/khadas-vim3_android.h b/include/configs/khadas-vim3_android.h
> index da6adf6c413a..4a8348914035 100644
> --- a/include/configs/khadas-vim3_android.h
> +++ b/include/configs/khadas-vim3_android.h
> @@ -12,7 +12,7 @@
> #define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
> #define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
>
> -#if defined(CONFIG_CMD_AB_SELECT)
> +#if defined(CONFIG_CMD_BCB)
> #define PARTS_DEFAULT \
> "uuid_disk=${uuid_gpt_disk};" \
> "name=logo,start=512K,size=2M,uuid=" LOGO_UUID \
> diff --git a/include/configs/khadas-vim3l_android.h b/include/configs/khadas-vim3l_android.h
> index b1768e2d8211..bf1c831c0bc3 100644
> --- a/include/configs/khadas-vim3l_android.h
> +++ b/include/configs/khadas-vim3l_android.h
> @@ -12,7 +12,7 @@
> #define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
> #define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
>
> -#if defined(CONFIG_CMD_AB_SELECT)
> +#if defined(CONFIG_CMD_BCB)
This part should only be executed when our partitioning scheme is A/B. I
think this diff will break because for both:
configs/khadas-vim3l_android_ab_defconfig
configs/khadas-vim3_android_defconfig
We have CONFIG_CMD_BCB=y
How can we differentiate, at build time, boards wanting A/B support and
boards that don't?
Note that non A/B is being deprecated so this might not be an issue in
the future.
> #define PARTS_DEFAULT \
> "uuid_disk=${uuid_gpt_disk};" \
> "name=logo,start=512K,size=2M,uuid=" LOGO_UUID \
> diff --git a/include/configs/meson64_android.h b/include/configs/meson64_android.h
> index c0e977abb01f..93f9e191a165 100644
> --- a/include/configs/meson64_android.h
> +++ b/include/configs/meson64_android.h
> @@ -47,13 +47,13 @@
> #define AVB_VERIFY_CMD ""
> #endif
>
> -#if defined(CONFIG_CMD_AB_SELECT)
> +#if defined(CONFIG_CMD_BCB)
> #define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "get_current_slot=" \
> "if part number mmc ${mmcdev} " CONTROL_PARTITION " control_part_number; " \
> "then " \
> "echo " CONTROL_PARTITION \
> " partition number:${control_part_number};" \
> - "ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
> + "bcb ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
> "else " \
> "echo " CONTROL_PARTITION " partition not found;" \
> "fi;\0"
> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
> index 26494ae98010..5a2ea8c4ddcc 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -93,13 +93,13 @@
>
> #define CONTROL_PARTITION "misc"
>
> -#if defined(CONFIG_CMD_AB_SELECT)
> +#if defined(CONFIG_CMD_BCB)
> #define AB_SELECT_SLOT \
> "if part number mmc 1 " CONTROL_PARTITION " control_part_number; " \
> "then " \
> "echo " CONTROL_PARTITION \
> " partition number:${control_part_number};" \
> - "ab_select slot_name mmc ${mmcdev}:${control_part_number};" \
> + "bcb ab_select slot_name mmc ${mmcdev}:${control_part_number};" \
> "else " \
> "echo " CONTROL_PARTITION " partition not found;" \
> "exit;" \
> diff --git a/test/py/tests/test_android/test_ab.py b/test/py/tests/test_android/test_ab.py
> index c79cb07fda35..0d7b7995a9fa 100644
> --- a/test/py/tests/test_android/test_ab.py
> +++ b/test/py/tests/test_android/test_ab.py
> @@ -56,20 +56,20 @@ def ab_disk_image(u_boot_console):
>
> @pytest.mark.boardspec('sandbox')
> @pytest.mark.buildconfigspec('android_ab')
> - at pytest.mark.buildconfigspec('cmd_ab_select')
> + at pytest.mark.buildconfigspec('cmd_bcb')
> @pytest.mark.requiredtool('sgdisk')
> def test_ab(ab_disk_image, u_boot_console):
> - """Test the 'ab_select' command."""
> + """Test the 'bcb ab_select' command."""
>
> u_boot_console.run_command('host bind 0 ' + ab_disk_image.path)
>
> - output = u_boot_console.run_command('ab_select slot_name host 0#misc')
> + output = u_boot_console.run_command('bcb ab_select slot_name host 0#misc')
> assert 're-initializing A/B metadata' in output
> assert 'Attempting slot a, tries remaining 7' in output
> output = u_boot_console.run_command('printenv slot_name')
> assert 'slot_name=a' in output
>
> - output = u_boot_console.run_command('ab_select slot_name host 0:1')
> + output = u_boot_console.run_command('bcb ab_select slot_name host 0:1')
> assert 'Attempting slot b, tries remaining 7' in output
> output = u_boot_console.run_command('printenv slot_name')
> assert 'slot_name=b' in output
> --
> 2.43.0
More information about the U-Boot
mailing list