[PATCH v3 04/13] ufs: use dcache helpers for scsi_cmd data and only invalidate if necessary

Neil Armstrong neil.armstrong at linaro.org
Mon Sep 30 14:44:26 CEST 2024


Now we have proper flush and invalidate helpers, we can use them
directly to operate on the scsi_cmd data.

Likewise, we do not need to flush then invalidate, just flush _or_
invalidate depending on the data direction.

Reviewed-by: Neha Malcom Francis <n-francis at ti.com>
Tested-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 drivers/ufs/ufs.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/ufs/ufs.c b/drivers/ufs/ufs.c
index 5845fd694d3..d99dcdef7d0 100644
--- a/drivers/ufs/ufs.c
+++ b/drivers/ufs/ufs.c
@@ -1468,7 +1468,6 @@ static void prepare_prdt_table(struct ufs_hba *hba, struct scsi_cmd *pccb)
 {
 	struct utp_transfer_req_desc *req_desc = hba->utrdl;
 	struct ufshcd_sg_entry *prd_table = hba->ucd_prdt_ptr;
-	uintptr_t aaddr = (uintptr_t)(pccb->pdata) & ~(ARCH_DMA_MINALIGN - 1);
 	ulong datalen = pccb->datalen;
 	int table_length;
 	u8 *buf;
@@ -1480,15 +1479,6 @@ static void prepare_prdt_table(struct ufs_hba *hba, struct scsi_cmd *pccb)
 		return;
 	}
 
-	if (pccb->dma_dir == DMA_TO_DEVICE) {	/* Write to device */
-		flush_dcache_range(aaddr,
-				   ALIGN((uintptr_t)pccb->pdata + datalen, ARCH_DMA_MINALIGN));
-	}
-
-	/* In any case, invalidate cache to avoid stale data in it. */
-	invalidate_dcache_range(aaddr,
-				ALIGN((uintptr_t)pccb->pdata + datalen, ARCH_DMA_MINALIGN));
-
 	table_length = DIV_ROUND_UP(pccb->datalen, MAX_PRDT_ENTRY);
 	buf = pccb->pdata;
 	i = table_length;
@@ -1517,8 +1507,12 @@ static int ufs_scsi_exec(struct udevice *scsi_dev, struct scsi_cmd *pccb)
 	ufshcd_prepare_utp_scsi_cmd_upiu(hba, pccb, upiu_flags);
 	prepare_prdt_table(hba, pccb);
 
+	ufshcd_cache_flush(pccb->pdata, pccb->datalen);
+
 	ufshcd_send_command(hba, TASK_TAG);
 
+	ufshcd_cache_invalidate(pccb->pdata, pccb->datalen);
+
 	ocs = ufshcd_get_tr_ocs(hba);
 	switch (ocs) {
 	case OCS_SUCCESS:

-- 
2.34.1



More information about the U-Boot mailing list