[PATCH v1 07/12] pcie: starfive: Make the driver compatible with upstream DT
Hal Feng
hal.feng at starfivetech.com
Mon Sep 30 17:59:14 CEST 2024
There are difference between upstream DT and the old DT
in terms of reg base, reset gpio and syscon. Make the driver
compatible with upstream DT.
Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
---
drivers/pci/pcie_starfive_jh7110.c | 59 +++++++++++++++---------------
1 file changed, 30 insertions(+), 29 deletions(-)
diff --git a/drivers/pci/pcie_starfive_jh7110.c b/drivers/pci/pcie_starfive_jh7110.c
index 569fbfd35c..51aca7359f 100644
--- a/drivers/pci/pcie_starfive_jh7110.c
+++ b/drivers/pci/pcie_starfive_jh7110.c
@@ -25,13 +25,19 @@
#include "pcie_plda_common.h"
/* system control */
-#define STG_SYSCON_K_RP_NEP_MASK BIT(8)
+#define STG_SYSCON_PCIE0_BASE 0x48
+#define STG_SYSCON_PCIE1_BASE 0x1f8
+
+#define STG_SYSCON_AR_OFFSET 0x78
#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK GENMASK(22, 8)
#define STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT 8
+#define STG_SYSCON_AW_OFFSET 0x7c
#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK GENMASK(14, 0)
#define STG_SYSCON_CLKREQ_MASK BIT(22)
#define STG_SYSCON_CKREF_SRC_SHIFT 18
#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18)
+#define STG_SYSCON_RP_NEP_OFFSET 0xe8
+#define STG_SYSCON_K_RP_NEP_MASK BIT(8)
DECLARE_GLOBAL_DATA_PTR;
@@ -41,9 +47,7 @@ struct starfive_pcie {
struct reset_ctl_bulk rsts;
struct gpio_desc reset_gpio;
struct regmap *regmap;
- u32 stg_arfun;
- u32 stg_awfun;
- u32 stg_rp_nep;
+ unsigned int stg_pcie_base;
};
static int starfive_pcie_atr_init(struct starfive_pcie *priv)
@@ -92,7 +96,6 @@ static int starfive_pcie_get_syscon(struct udevice *dev)
struct starfive_pcie *priv = dev_get_priv(dev);
struct udevice *syscon;
struct ofnode_phandle_args syscfg_phandle;
- u32 cells[4];
int ret;
/* get corresponding syscon phandle */
@@ -117,20 +120,6 @@ static int starfive_pcie_get_syscon(struct udevice *dev)
return -ENODEV;
}
- /* get syscon register offset */
- ret = dev_read_u32_array(dev, "starfive,stg-syscon",
- cells, ARRAY_SIZE(cells));
- if (ret) {
- dev_err(dev, "Get syscon register err %d\n", ret);
- return -EINVAL;
- }
-
- dev_dbg(dev, "Get syscon values: %x, %x, %x\n",
- cells[1], cells[2], cells[3]);
- priv->stg_arfun = cells[1];
- priv->stg_awfun = cells[2];
- priv->stg_rp_nep = cells[3];
-
return 0;
}
@@ -138,8 +127,9 @@ static int starfive_pcie_parse_dt(struct udevice *dev)
{
struct starfive_pcie *priv = dev_get_priv(dev);
int ret;
+ u32 domain_nr;
- priv->plda.reg_base = (void *)dev_read_addr_name(dev, "reg");
+ priv->plda.reg_base = (void *)dev_read_addr_name(dev, "apb");
if (priv->plda.reg_base == (void __iomem *)FDT_ADDR_T_NONE) {
dev_err(dev, "Missing required reg address range\n");
return -EINVAL;
@@ -147,7 +137,7 @@ static int starfive_pcie_parse_dt(struct udevice *dev)
priv->plda.cfg_base =
(void *)dev_read_addr_size_name(dev,
- "config",
+ "cfg",
&priv->plda.cfg_size);
if (priv->plda.cfg_base == (void __iomem *)FDT_ADDR_T_NONE) {
dev_err(dev, "Missing required config address range");
@@ -172,7 +162,18 @@ static int starfive_pcie_parse_dt(struct udevice *dev)
return ret;
}
- ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset_gpio,
+ ret = dev_read_u32(dev, "linux,pci-domain", &domain_nr);
+ if (ret) {
+ dev_err(dev, "Can't get pci domain: %d\n", ret);
+ return ret;
+ }
+
+ if (domain_nr == 0)
+ priv->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
+ else
+ priv->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
+
+ ret = gpio_request_by_name(dev, "perst-gpios", 0, &priv->reset_gpio,
GPIOD_IS_OUT);
if (ret) {
dev_err(dev, "Can't get reset-gpio: %d\n", ret);
@@ -208,12 +209,12 @@ static int starfive_pcie_init_port(struct udevice *dev)
/* Disable physical functions except #0 */
for (i = 1; i < PLDA_FUNC_NUM; i++) {
regmap_update_bits(priv->regmap,
- priv->stg_arfun,
+ priv->stg_pcie_base + STG_SYSCON_AR_OFFSET,
STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
(i << PLDA_PHY_FUNC_SHIFT) <<
STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT);
regmap_update_bits(priv->regmap,
- priv->stg_awfun,
+ priv->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
i << PLDA_PHY_FUNC_SHIFT);
@@ -222,11 +223,11 @@ static int starfive_pcie_init_port(struct udevice *dev)
/* Disable physical functions */
regmap_update_bits(priv->regmap,
- priv->stg_arfun,
+ priv->stg_pcie_base + STG_SYSCON_AR_OFFSET,
STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
0);
regmap_update_bits(priv->regmap,
- priv->stg_awfun,
+ priv->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
0);
@@ -273,17 +274,17 @@ static int starfive_pcie_probe(struct udevice *dev)
return ret;
regmap_update_bits(priv->regmap,
- priv->stg_rp_nep,
+ priv->stg_pcie_base + STG_SYSCON_RP_NEP_OFFSET,
STG_SYSCON_K_RP_NEP_MASK,
STG_SYSCON_K_RP_NEP_MASK);
regmap_update_bits(priv->regmap,
- priv->stg_awfun,
+ priv->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_CKREF_SRC_MASK,
2 << STG_SYSCON_CKREF_SRC_SHIFT);
regmap_update_bits(priv->regmap,
- priv->stg_awfun,
+ priv->stg_pcie_base + STG_SYSCON_AW_OFFSET,
STG_SYSCON_CLKREQ_MASK,
STG_SYSCON_CLKREQ_MASK);
--
2.43.2
More information about the U-Boot
mailing list