[PATCH v1 11/34] ddr: altera: soc64: Add secure region support for ATF flow

[alif.zakuan.yuslaimi at altera.com]

From: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi at altera.com>

Setting up firewall regions based on SDRAM memory banks configuration
(up to CONFIG_NR_DRAM_BANKS banks) instead of using whole address space.

First 1 MiB (0 to 0xfffff) of SDRAM is configured as secure region,
other address spaces are non-secure regions. The ARM Trusted Firmware (ATF)
image is located in this first 1 MiB memory region. So, this can prevent
software executing at non-secure state EL0-EL2 and non-secure masters
access to secure region.

Add common function for firewall setup and reuse for all SoC64 devices.

Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi at altera.com>
---
 drivers/ddr/altera/sdram_agilex.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/ddr/altera/sdram_agilex.c b/drivers/ddr/altera/sdram_agilex.c
index 7f2cccb6af2..8aeb4320702 100644
--- a/drivers/ddr/altera/sdram_agilex.c
+++ b/drivers/ddr/altera/sdram_agilex.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2019 Intel Corporation <www.intel.com>
+ * Copyright (C) 2025 Altera Corporation <www.altera.com>
  *
  */
 
@@ -114,20 +115,6 @@ int sdram_mmr_init_full(struct udevice *dev)
 
 	printf("DDR: %lld MiB\n", gd->ram_size >> 20);
 
-	/* This enables nonsecure access to DDR */
-	/* mpuregion0addr_limit */
-	FW_MPU_DDR_SCR_WRITEL(gd->ram_size - 1,
-			      FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT);
-	FW_MPU_DDR_SCR_WRITEL(0x1F, FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT);
-
-	/* nonmpuregion0addr_limit */
-	FW_MPU_DDR_SCR_WRITEL(gd->ram_size - 1,
-			      FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT);
-
-	/* Enable mpuregion0enable and nonmpuregion0enable */
-	FW_MPU_DDR_SCR_WRITEL(MPUREGION0_ENABLE | NONMPUREGION0_ENABLE,
-			      FW_MPU_DDR_SCR_EN_SET);
-
 	u32 ctrlcfg1 = hmc_readl(plat, CTRLCFG1);
 
 	/* Enable or disable the DDR ECC */
@@ -162,6 +149,8 @@ int sdram_mmr_init_full(struct udevice *dev)
 
 	sdram_size_check(&bd);
 
+	sdram_set_firewall(&bd);
+
 	priv->info.base = bd.bi_dram[0].start;
 	priv->info.size = gd->ram_size;
 
-- 
2.35.3