[PATCH v7 05/12] drivers: i3c: Enabled Kconfig and Makefile for DWI3C

[Heiko Schocher]

Hello Dniesh,

On 28.07.25 08:56, dinesh.maniyam at altera.com wrote:
> From: Dinesh Maniyam <dinesh.maniyam at altera.com>
> 
> Enable the Kconfig and Makefile for the MIPI DWI3C driver.
> 
> Signed-off-by: Dinesh Maniyam <dinesh.maniyam at altera.com>
> ---
>   drivers/i3c/Kconfig         |  5 +++++
>   drivers/i3c/Makefile        |  1 +
>   drivers/i3c/master/Kconfig  | 11 +++++++++++
>   drivers/i3c/master/Makefile |  3 +++
>   4 files changed, 20 insertions(+)
>   create mode 100644 drivers/i3c/master/Kconfig
>   create mode 100644 drivers/i3c/master/Makefile

beside the typo Askar mentioned:

Reviewed-by: Heiko Schocher <hs at denx.de>

bye,
Heiko
> 
> diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
> index fa68612787b..d4451057de0 100644
> --- a/drivers/i3c/Kconfig
> +++ b/drivers/i3c/Kconfig
> @@ -14,3 +14,8 @@ menuconfig I3C
>   	  If you want I3C support, you should say Y here and also to the
>   	  specific driver for your bus adapter(s) below.
>   
> +if I3C
> +
> +source "drivers/i3c/master/Kconfig"
> +
> +endif # I3C
> diff --git a/drivers/i3c/Makefile b/drivers/i3c/Makefile
> index 5bb44a8d64f..5ddc4743c86 100644
> --- a/drivers/i3c/Makefile
> +++ b/drivers/i3c/Makefile
> @@ -1,3 +1,4 @@
>   # SPDX-License-Identifier: GPL-2.0
>   
>   obj-y				:= i3c-uclass.o device.o master.o
> +obj-y				+= master/
> diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
> new file mode 100644
> index 00000000000..22bb7c21ea1
> --- /dev/null
> +++ b/drivers/i3c/master/Kconfig
> @@ -0,0 +1,11 @@
> +config DW_I3C_MASTER
> +	tristate "Synospsys DesignWare I3C master driver"
> +	depends on I3C
> +	help
> +	  Support for Synopsys DesignWare MIPI I3C Controller.
> +
> +	  For details please see
> +	  https://www.synopsys.com/dw/ipdir.php?ds=mipi_i3c
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called dw-i3c-master.
> diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
> new file mode 100644
> index 00000000000..c7562f1aa33
> --- /dev/null
> +++ b/drivers/i3c/master/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_DW_I3C_MASTER) += dw-i3c-master.o
> 

-- 
DENX Software Engineering GmbH, Managing Director: Johanna Denk, Tabea Lutz
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de