[PATCH v2 05/11] sunxi: Switch V3/V3s device-tree source to OF_UPSTREAM
Paul Kocialkowski
paulk at sys-base.io
Tue Aug 5 19:48:21 CEST 2025
From: Paul Kocialkowski <contact at paulk.fr>
There is nothing special for u-boot in the V3/V3s device-tree files,
they are just copies of the upstream ones.
Remove the copies and switch to OF_UPSTREAM for supported boards.
Signed-off-by: Paul Kocialkowski <contact at paulk.fr>
---
arch/arm/dts/Makefile | 5 -
arch/arm/dts/sun8i-s3-elimo-impetus.dtsi | 44 --
arch/arm/dts/sun8i-s3-elimo-initium.dts | 29 -
arch/arm/dts/sun8i-s3-lichee-zero-plus.dts | 53 --
arch/arm/dts/sun8i-s3-pinecube.dts | 228 ------
arch/arm/dts/sun8i-v3-sl631-imx179.dts | 12 -
arch/arm/dts/sun8i-v3-sl631.dtsi | 138 ----
arch/arm/dts/sun8i-v3.dtsi | 63 --
arch/arm/dts/sun8i-v3s-anbernic-rg-nano.dts | 276 --------
arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts | 105 ---
arch/arm/dts/sun8i-v3s-licheepi-zero.dts | 101 ---
arch/arm/dts/sun8i-v3s.dtsi | 656 ------------------
arch/arm/mach-sunxi/Kconfig | 1 +
configs/LicheePi_Zero_defconfig | 2 +-
configs/pinecube_defconfig | 2 +-
15 files changed, 3 insertions(+), 1712 deletions(-)
delete mode 100644 arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
delete mode 100644 arch/arm/dts/sun8i-s3-elimo-initium.dts
delete mode 100644 arch/arm/dts/sun8i-s3-lichee-zero-plus.dts
delete mode 100644 arch/arm/dts/sun8i-s3-pinecube.dts
delete mode 100644 arch/arm/dts/sun8i-v3-sl631-imx179.dts
delete mode 100644 arch/arm/dts/sun8i-v3-sl631.dtsi
delete mode 100644 arch/arm/dts/sun8i-v3.dtsi
delete mode 100644 arch/arm/dts/sun8i-v3s-anbernic-rg-nano.dts
delete mode 100644 arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
delete mode 100644 arch/arm/dts/sun8i-v3s-licheepi-zero.dts
delete mode 100644 arch/arm/dts/sun8i-v3s.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3d93679058c8..d0d25aac1b25 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -646,11 +646,6 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
sun8i-r40-oka40i-c.dtb \
sun8i-t3-cqa3t-bv3.dtb \
sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN8I_V3_V3S) += \
- sun8i-s3-elimo-initium.dtb \
- sun8i-s3-pinecube.dtb \
- sun8i-v3-sl631-imx179.dtb \
- sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN8I_R528) += \
sun8i-t113s-mangopi-mq-r-t113.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
diff --git a/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
deleted file mode 100644
index 052b010a5607..000000000000
--- a/arch/arm/dts/sun8i-s3-elimo-impetus.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2020 Matteo Scordino <matteo at elimo.io>
- */
-
-/dts-v1/;
-#include "sun8i-v3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-/ {
- model = "Elimo Impetus SoM";
- compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&mmc0 {
- broken-cd;
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-0 = <&uart0_pb_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-s3-elimo-initium.dts b/arch/arm/dts/sun8i-s3-elimo-initium.dts
deleted file mode 100644
index 039677c2cc65..000000000000
--- a/arch/arm/dts/sun8i-s3-elimo-initium.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2020 Matteo Scordino <matteo at elimo.io>
- */
-
-/dts-v1/;
-#include "sun8i-s3-elimo-impetus.dtsi"
-
-/ {
- model = "Elimo Initium";
- compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
- "allwinner,sun8i-v3";
-
- aliases {
- serial1 = &uart1;
- };
-};
-
-&uart1 {
- pinctrl-0 = <&uart1_pg_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&emac {
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/dts/sun8i-s3-lichee-zero-plus.dts
deleted file mode 100644
index d18192d51d1b..000000000000
--- a/arch/arm/dts/sun8i-s3-lichee-zero-plus.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Icenowy Zheng <icenowy at aosc.io>
- */
-
-/dts-v1/;
-#include "sun8i-v3.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Sipeed Lichee Zero Plus";
- compatible = "sipeed,lichee-zero-plus", "sochip,s3",
- "allwinner,sun8i-v3";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
-&mmc0 {
- broken-cd;
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-0 = <&uart0_pb_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-s3-pinecube.dts b/arch/arm/dts/sun8i-s3-pinecube.dts
deleted file mode 100644
index e0d4404b5957..000000000000
--- a/arch/arm/dts/sun8i-s3-pinecube.dts
+++ /dev/null
@@ -1,228 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-/*
- * Copyright 2019 Icenowy Zheng <icenowy at aosc.io>
- */
-
-/dts-v1/;
-#include "sun8i-v3.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "PineCube IP Camera";
- compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
-
- aliases {
- serial0 = &uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led1 {
- label = "pine64:ir:led1";
- gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
- };
-
- led2 {
- label = "pine64:ir:led2";
- gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
- };
- };
-
- reg_vcc5v0: vcc5v0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_vcc_wifi: vcc-wifi {
- compatible = "regulator-fixed";
- regulator-name = "vcc-wifi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
- vin-supply = <®_dcdc3>;
- startup-delay-us = <200000>;
- };
-
- wifi_pwrseq: pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
- post-power-on-delay-ms = <200>;
- };
-};
-
-&csi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&csi1_8bit_pins>;
- status = "okay";
-
- port {
- csi1_ep: endpoint {
- remote-endpoint = <&ov5640_ep>;
- bus-width = <8>;
- hsync-active = <1>; /* Active high */
- vsync-active = <0>; /* Active low */
- data-active = <1>; /* Active high */
- pclk-sample = <1>; /* Rising */
- };
- };
-};
-
-&emac {
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic at 34 {
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pe_pins>;
- status = "okay";
-
- ov5640: camera at 3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- pinctrl-names = "default";
- pinctrl-0 = <&csi1_mclk_pin>;
- clocks = <&ccu CLK_CSI1_MCLK>;
- clock-names = "xclk";
-
- AVDD-supply = <®_ldo3>;
- DOVDD-supply = <®_ldo3>;
- DVDD-supply = <®_ldo4>;
- reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
- powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
-
- port {
- ov5640_ep: endpoint {
- remote-endpoint = <&csi1_ep>;
- bus-width = <8>;
- hsync-active = <1>; /* Active high */
- vsync-active = <0>; /* Active low */
- data-active = <1>; /* Active high */
- pclk-sample = <1>; /* Rising */
- };
- };
- };
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-200 {
- label = "Setup";
- linux,code = <KEY_SETUP>;
- channel = <0>;
- voltage = <190000>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <®_dcdc3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc_wifi>;
- vqmmc-supply = <®_dcdc3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-};
-
-&pio {
- vcc-pd-supply = <®_dcdc3>;
- vcc-pe-supply = <®_ldo3>;
-};
-
-#include "axp209.dtsi"
-
-&ac_power_supply {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-sys-cpu-ephy";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-3v3";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-®_ldo3 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-name = "avdd-dovdd-2v8-csi";
- regulator-soft-start;
- regulator-ramp-delay = <1600>;
-};
-
-®_ldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "dvdd-1v8-csi";
-};
-
-&spi0 {
- status = "okay";
-
- flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "winbond,w25q128", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- usb0_vbus-supply = <®_vcc5v0>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/dts/sun8i-v3-sl631-imx179.dts
deleted file mode 100644
index 117aeece4e55..000000000000
--- a/arch/arm/dts/sun8i-v3-sl631-imx179.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-/*
- * Copyright 2020 Paul Kocialkowski <contact at paulk.fr>
- */
-
-#include "sun8i-v3-sl631.dtsi"
-
-/ {
- model = "SL631 Action Camera with IMX179";
- compatible = "allwinner,sl631-imx179", "allwinner,sl631",
- "allwinner,sun8i-v3";
-};
diff --git a/arch/arm/dts/sun8i-v3-sl631.dtsi b/arch/arm/dts/sun8i-v3-sl631.dtsi
deleted file mode 100644
index 6f93f8c49f84..000000000000
--- a/arch/arm/dts/sun8i-v3-sl631.dtsi
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR X11)
-/*
- * Copyright 2020 Paul Kocialkowski <contact at paulk.fr>
- */
-
-/dts-v1/;
-
-#include "sun8i-v3.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "SL631 Action Camera";
- compatible = "allwinner,sl631", "allwinner,sun8i-v3";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic at 34 {
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pb_pins>;
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_ldo2>;
- status = "okay";
-
- button-174 {
- label = "Down";
- linux,code = <KEY_DOWN>;
- channel = <0>;
- voltage = <174603>;
- };
-
- button-384 {
- label = "Up";
- linux,code = <KEY_UP>;
- channel = <0>;
- voltage = <384126>;
- };
-
- button-593 {
- label = "OK";
- linux,code = <KEY_OK>;
- channel = <0>;
- voltage = <593650>;
- };
-};
-
-&mmc0 {
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- bus-width = <4>;
- vmmc-supply = <®_dcdc3>;
- status = "okay";
-};
-
-&pio {
- vcc-pd-supply = <®_dcdc3>;
- vcc-pe-supply = <®_dcdc3>;
-};
-
-#include "axp209.dtsi"
-
-&ac_power_supply {
- status = "okay";
-};
-
-&battery_power_supply {
- status = "okay";
-};
-
-®_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd-sys-cpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vdd-3v3";
-};
-
-®_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-®_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-&spi0 {
- status = "okay";
-
- flash at 0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- };
-};
-
-&uart1 {
- pinctrl-0 = <&uart1_pg_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-v3.dtsi b/arch/arm/dts/sun8i-v3.dtsi
deleted file mode 100644
index 186c30cbe6ee..000000000000
--- a/arch/arm/dts/sun8i-v3.dtsi
+++ /dev/null
@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Icenowy Zheng <icenowy at aosc.io>
- * Copyright (C) 2021 Tobias Schramm <t.schramm at manjaro.org>
- */
-
-#include "sun8i-v3s.dtsi"
-
-/ {
- soc {
- i2s0: i2s at 1c22000 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun8i-v3-i2s",
- "allwinner,sun8i-h3-i2s";
- reg = <0x01c22000 0x400>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
- clock-names = "apb", "mod";
- dmas = <&dma 3>, <&dma 3>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_pins>;
- resets = <&ccu RST_BUS_I2S0>;
- status = "disabled";
- };
- };
-};
-
-&ccu {
- compatible = "allwinner,sun8i-v3-ccu";
-};
-
-&codec_analog {
- compatible = "allwinner,sun8i-v3-codec-analog",
- "allwinner,sun8i-h3-codec-analog";
-};
-
-&emac {
- /delete-property/ phy-handle;
- /delete-property/ phy-mode;
-};
-
-&mdio_mux {
- external_mdio: mdio at 2 {
- reg = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
-
-&pio {
- compatible = "allwinner,sun8i-v3-pinctrl";
-
- i2s0_pins: i2s0-pins {
- pins = "PG10", "PG11", "PG12", "PG13";
- function = "i2s";
- };
-
- uart1_pg_pins: uart1-pg-pins {
- pins = "PG6", "PG7";
- function = "uart1";
- };
-};
diff --git a/arch/arm/dts/sun8i-v3s-anbernic-rg-nano.dts b/arch/arm/dts/sun8i-v3s-anbernic-rg-nano.dts
deleted file mode 100644
index f34dfdf1566d..000000000000
--- a/arch/arm/dts/sun8i-v3s-anbernic-rg-nano.dts
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include "sun8i-v3s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-/ {
- model = "Anbernic RG Nano";
- compatible = "anbernic,rg-nano", "allwinner,sun8i-v3s";
-
- aliases {
- rtc0 = &pcf8563;
- rtc1 = &rtc;
- serial0 = &uart0;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <0 1 2 3 8 14 21 32 46 60 80 100>;
- default-brightness-level = <11>;
- power-supply = <®_vcc5v0>;
- pwms = <&pwm 0 40000 1>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
-
- button-a {
- gpios = <&gpio_expander 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-A";
- linux,code = <BTN_EAST>;
- };
-
- button-b {
- gpios = <&gpio_expander 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-B";
- linux,code = <BTN_SOUTH>;
- };
-
- button-down {
- gpios = <&gpio_expander 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "DPAD-DOWN";
- linux,code = <BTN_DPAD_DOWN>;
- };
-
- button-left {
- gpios = <&gpio_expander 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "DPAD-LEFT";
- linux,code = <BTN_DPAD_LEFT>;
- };
-
- button-right {
- gpios = <&gpio_expander 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "DPAD-RIGHT";
- linux,code = <BTN_DPAD_RIGHT>;
- };
-
- button-se {
- gpios = <&gpio_expander 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-SELECT";
- linux,code = <BTN_SELECT>;
- };
-
- button-st {
- gpios = <&gpio_expander 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-START";
- linux,code = <BTN_START>;
- };
-
- button-tl {
- gpios = <&gpio_expander 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-L";
- linux,code = <BTN_TL>;
- };
-
- button-tr {
- gpios = <&gpio_expander 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-R";
- linux,code = <BTN_TR>;
- };
-
- button-up {
- gpios = <&gpio_expander 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "DPAD-UP";
- linux,code = <BTN_DPAD_UP>;
- };
-
- button-x {
- gpios = <&gpio_expander 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-X";
- linux,code = <BTN_NORTH>;
- };
-
- button-y {
- gpios = <&gpio_expander 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
- label = "BTN-Y";
- linux,code = <BTN_WEST>;
- };
- };
-};
-
-&codec {
- allwinner,audio-routing = "Speaker", "HP",
- "MIC1", "Mic",
- "Mic", "HBIAS";
- allwinner,pa-gpios = <&pio 5 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PF6 */
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- gpio_expander: gpio at 20 {
- compatible = "nxp,pcal6416";
- reg = <0x20>;
- gpio-controller;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupt-parent = <&pio>;
- interrupts = <1 3 IRQ_TYPE_EDGE_BOTH>; /* PB3/EINT3 */
- vcc-supply = <®_vcc3v3>;
- };
-
- axp209: pmic at 34 {
- reg = <0x34>;
- interrupt-parent = <&pio>;
- interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5/EINT5 */
- };
-
- pcf8563: rtc at 51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-};
-
-#include "axp209.dtsi"
-
-&battery_power_supply {
- status = "okay";
-};
-
-&mmc0 {
- broken-cd;
- bus-width = <4>;
- disable-wp;
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc3v3>;
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-&pio {
- vcc-pb-supply = <®_vcc3v3>;
- vcc-pc-supply = <®_vcc3v3>;
- vcc-pf-supply = <®_vcc3v3>;
- vcc-pg-supply = <®_vcc3v3>;
-
- spi0_no_miso_pins: spi0-no-miso-pins {
- pins = "PC1", "PC2", "PC3";
- function = "spi0";
- };
-};
-
-&pwm {
- pinctrl-0 = <&pwm0_pin>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-/* DCDC2 wired into vdd-cpu, vdd-sys, and vdd-ephy. */
-®_dcdc2 {
- regulator-always-on;
- regulator-max-microvolt = <1250000>;
- regulator-min-microvolt = <1250000>;
- regulator-name = "vdd-cpu";
-};
-
-/* DCDC3 wired into every 3.3v input that isn't the RTC. */
-®_dcdc3 {
- regulator-always-on;
- regulator-max-microvolt = <3300000>;
- regulator-min-microvolt = <3300000>;
- regulator-name = "vcc-io";
-};
-
-/* LDO1 wired into RTC, voltage is hard-wired at 3.3v. */
-®_ldo1 {
- regulator-always-on;
- regulator-name = "vcc-rtc";
-};
-
-/* LDO2 wired into VCC-PLL and audio codec. */
-®_ldo2 {
- regulator-always-on;
- regulator-max-microvolt = <3000000>;
- regulator-min-microvolt = <3000000>;
- regulator-name = "vcc-pll";
-};
-
-/* LDO3, LDO4, and LDO5 unused. */
-®_ldo3 {
- status = "disabled";
-};
-
-®_ldo4 {
- status = "disabled";
-};
-
-/* RTC uses internal oscillator */
-&rtc {
- /delete-property/ clocks;
-};
-
-&spi0 {
- pinctrl-0 = <&spi0_no_miso_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- display at 0 {
- compatible = "saef,sftc154b", "panel-mipi-dbi-spi";
- reg = <0>;
- backlight = <&backlight>;
- dc-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */
- reset-gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
- spi-max-frequency = <100000000>;
-
- height-mm = <39>;
- width-mm = <39>;
-
- /* Set hb-porch to compensate for non-visible area */
- panel-timing {
- hactive = <240>;
- vactive = <240>;
- hback-porch = <80>;
- vback-porch = <0>;
- clock-frequency = <0>;
- hfront-porch = <0>;
- hsync-len = <0>;
- vfront-porch = <0>;
- vsync-len = <0>;
- };
- };
-};
-
-&uart0 {
- pinctrl-0 = <&uart0_pb_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 6 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG5 */
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
deleted file mode 100644
index 752ad05c8f83..000000000000
--- a/arch/arm/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2016 Icenowy Zheng <icenowy at aosc.xyz>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-v3s-licheepi-zero.dts"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Lichee Pi Zero with Dock";
- compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
- "allwinner,sun8i-v3s";
-
- aliases {
- ethernet0 = &emac;
- };
-
- leds {
- /* The LEDs use PG0~2 pins, which conflict with MMC1 */
- status = "disabled";
- };
-};
-
-&emac {
- allwinner,leds-active-low;
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button-200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button-400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-
- button-600 {
- label = "Select";
- linux,code = <KEY_SELECT>;
- channel = <0>;
- voltage = <600000>;
- };
-
- button-800 {
- label = "Start";
- linux,code = <KEY_OK>;
- channel = <0>;
- voltage = <800000>;
- };
-};
-
-&mmc1 {
- broken-cd;
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
deleted file mode 100644
index 2e4587d26ce5..000000000000
--- a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2016 Icenowy Zheng <icenowy at aosc.xyz>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-v3s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-/ {
- model = "Lichee Pi Zero";
- compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- blue_led {
- label = "licheepi:blue:usr";
- gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
- };
-
- green_led {
- label = "licheepi:green:usr";
- gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
- default-state = "on";
- };
-
- red_led {
- label = "licheepi:red:usr";
- gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
- };
- };
-};
-
-&mmc0 {
- broken-cd;
- bus-width = <4>;
- vmmc-supply = <®_vcc3v3>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-0 = <&uart0_pb_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi
deleted file mode 100644
index 9e13c2aa8911..000000000000
--- a/arch/arm/dts/sun8i-v3s.dtsi
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- * Copyright (C) 2016 Icenowy Zheng <icenowy at aosc.xyz>
- * Copyright (C) 2021 Tobias Schramm <t.schramm at manjaro.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/sun6i-rtc.h>
-#include <dt-bindings/clock/sun8i-v3s-ccu.h>
-#include <dt-bindings/reset/sun8i-v3s-ccu.h>
-#include <dt-bindings/clock/sun8i-de2.h>
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&gic>;
-
- chosen {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- framebuffer-lcd {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "mixer0-lcd0";
- clocks = <&display_clocks CLK_MIXER0>,
- <&ccu CLK_TCON0>;
- status = "disabled";
- };
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu at 0 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <0>;
- clocks = <&ccu CLK_CPU>;
- };
- };
-
- de: display-engine {
- compatible = "allwinner,sun8i-v3s-display-engine";
- allwinner,pipelines = <&mixer0>;
- status = "disabled";
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- osc24M: osc24M-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-accuracy = <50000>;
- clock-output-names = "osc24M";
- };
-
- osc32k: osc32k-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-accuracy = <50000>;
- clock-output-names = "ext-osc32k";
- };
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- display_clocks: clock at 1000000 {
- compatible = "allwinner,sun8i-v3s-de2-clk";
- reg = <0x01000000 0x10000>;
- clocks = <&ccu CLK_BUS_DE>,
- <&ccu CLK_DE>;
- clock-names = "bus",
- "mod";
- resets = <&ccu RST_BUS_DE>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- mixer0: mixer at 1100000 {
- compatible = "allwinner,sun8i-v3s-de2-mixer";
- reg = <0x01100000 0x100000>;
- clocks = <&display_clocks 0>,
- <&display_clocks 6>;
- clock-names = "bus",
- "mod";
- resets = <&display_clocks 0>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mixer0_out: port at 1 {
- reg = <1>;
-
- mixer0_out_tcon0: endpoint {
- remote-endpoint = <&tcon0_in_mixer0>;
- };
- };
- };
- };
-
- syscon: system-control at 1c00000 {
- compatible = "allwinner,sun8i-v3s-system-control",
- "allwinner,sun8i-h3-system-control";
- reg = <0x01c00000 0xd0>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- };
-
- nmi_intc: interrupt-controller at 1c000d0 {
- compatible = "allwinner,sun8i-v3s-nmi",
- "allwinner,sun9i-a80-nmi";
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x01c000d0 0x0c>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- dma: dma-controller at 1c02000 {
- compatible = "allwinner,sun8i-v3s-dma";
- reg = <0x01c02000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_DMA>;
- resets = <&ccu RST_BUS_DMA>;
- #dma-cells = <1>;
- };
-
- tcon0: lcd-controller at 1c0c000 {
- compatible = "allwinner,sun8i-v3s-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_TCON0>,
- <&ccu CLK_TCON0>;
- clock-names = "ahb",
- "tcon-ch0";
- clock-output-names = "tcon-data-clock";
- #clock-cells = <0>;
- resets = <&ccu RST_BUS_TCON0>;
- reset-names = "lcd";
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port at 0 {
- reg = <0>;
-
- tcon0_in_mixer0: endpoint {
- remote-endpoint = <&mixer0_out_tcon0>;
- };
- };
-
- tcon0_out: port at 1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
- };
- };
-
-
- mmc0: mmc at 1c0f000 {
- compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c0f000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC0>,
- <&ccu CLK_MMC0>,
- <&ccu CLK_MMC0_OUTPUT>,
- <&ccu CLK_MMC0_SAMPLE>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ccu RST_BUS_MMC0>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc1: mmc at 1c10000 {
- compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c10000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC1>,
- <&ccu CLK_MMC1>,
- <&ccu CLK_MMC1_OUTPUT>,
- <&ccu CLK_MMC1_SAMPLE>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ccu RST_BUS_MMC1>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- mmc2: mmc at 1c11000 {
- compatible = "allwinner,sun7i-a20-mmc";
- reg = <0x01c11000 0x1000>;
- clocks = <&ccu CLK_BUS_MMC2>,
- <&ccu CLK_MMC2>,
- <&ccu CLK_MMC2_OUTPUT>,
- <&ccu CLK_MMC2_SAMPLE>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
- resets = <&ccu RST_BUS_MMC2>;
- reset-names = "ahb";
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- crypto at 1c15000 {
- compatible = "allwinner,sun8i-v3s-crypto",
- "allwinner,sun8i-a33-crypto";
- reg = <0x01c15000 0x1000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
- clock-names = "ahb", "mod";
- dmas = <&dma 16>, <&dma 16>;
- dma-names = "rx", "tx";
- resets = <&ccu RST_BUS_CE>;
- reset-names = "ahb";
- };
-
- usb_otg: usb at 1c19000 {
- compatible = "allwinner,sun8i-h3-musb";
- reg = <0x01c19000 0x0400>;
- clocks = <&ccu CLK_BUS_OTG>;
- resets = <&ccu RST_BUS_OTG>;
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "mc";
- phys = <&usbphy 0>;
- phy-names = "usb";
- extcon = <&usbphy 0>;
- status = "disabled";
- };
-
- usbphy: phy at 1c19400 {
- compatible = "allwinner,sun8i-v3s-usb-phy";
- reg = <0x01c19400 0x2c>,
- <0x01c1a800 0x4>;
- reg-names = "phy_ctrl",
- "pmu0";
- clocks = <&ccu CLK_USB_PHY0>;
- clock-names = "usb0_phy";
- resets = <&ccu RST_USB_PHY0>;
- reset-names = "usb0_reset";
- status = "disabled";
- #phy-cells = <1>;
- };
-
- ehci: usb at 1c1a000 {
- compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
- reg = <0x01c1a000 0x100>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
- resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
- phys = <&usbphy 0>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ohci: usb at 1c1a400 {
- compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
- reg = <0x01c1a400 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
- <&ccu CLK_USB_OHCI0>;
- resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
- phys = <&usbphy 0>;
- phy-names = "usb";
- status = "disabled";
- };
-
- ccu: clock at 1c20000 {
- compatible = "allwinner,sun8i-v3s-ccu";
- reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&rtc CLK_OSC32K>;
- clock-names = "hosc", "losc";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- rtc: rtc at 1c20400 {
- #clock-cells = <1>;
- compatible = "allwinner,sun8i-v3-rtc";
- reg = <0x01c20400 0x54>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc32k>;
- clock-output-names = "osc32k", "osc32k-out";
- };
-
- pio: pinctrl at 1c20800 {
- compatible = "allwinner,sun8i-v3s-pinctrl";
- reg = <0x01c20800 0x400>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
- <&rtc CLK_OSC32K>;
- clock-names = "apb", "hosc", "losc";
- gpio-controller;
- #gpio-cells = <3>;
- interrupt-controller;
- #interrupt-cells = <3>;
-
- /omit-if-no-ref/
- csi0_mclk_pin: csi0-mclk-pin {
- pins = "PE20";
- function = "csi_mipi";
- };
-
- /omit-if-no-ref/
- csi1_8bit_pins: csi1-8bit-pins {
- pins = "PE0", "PE2", "PE3", "PE8", "PE9",
- "PE10", "PE11", "PE12", "PE13", "PE14",
- "PE15";
- function = "csi";
- };
-
- /omit-if-no-ref/
- csi1_mclk_pin: csi1-mclk-pin {
- pins = "PE1";
- function = "csi";
- };
-
- i2c0_pins: i2c0-pins {
- pins = "PB6", "PB7";
- function = "i2c0";
- };
-
- /omit-if-no-ref/
- i2c1_pb_pins: i2c1-pb-pins {
- pins = "PB8", "PB9";
- function = "i2c1";
- };
-
- /omit-if-no-ref/
- i2c1_pe_pins: i2c1-pe-pins {
- pins = "PE21", "PE22";
- function = "i2c1";
- };
-
- uart0_pb_pins: uart0-pb-pins {
- pins = "PB8", "PB9";
- function = "uart0";
- };
-
- uart2_pins: uart2-pins {
- pins = "PB0", "PB1";
- function = "uart2";
- };
-
- mmc0_pins: mmc0-pins {
- pins = "PF0", "PF1", "PF2", "PF3",
- "PF4", "PF5";
- function = "mmc0";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- mmc1_pins: mmc1-pins {
- pins = "PG0", "PG1", "PG2", "PG3",
- "PG4", "PG5";
- function = "mmc1";
- drive-strength = <30>;
- bias-pull-up;
- };
-
- /omit-if-no-ref/
- pwm0_pin: pwm0-pin {
- pins = "PB4";
- function = "pwm0";
- };
-
- /omit-if-no-ref/
- pwm1_pin: pwm1-pin {
- pins = "PB5";
- function = "pwm1";
- };
-
- spi0_pins: spi0-pins {
- pins = "PC0", "PC1", "PC2", "PC3";
- function = "spi0";
- };
- };
-
- timer at 1c20c00 {
- compatible = "allwinner,sun8i-v3s-timer";
- reg = <0x01c20c00 0xa0>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc24M>;
- };
-
- wdt0: watchdog at 1c20ca0 {
- compatible = "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc24M>;
- };
-
- pwm: pwm at 1c21400 {
- compatible = "allwinner,sun8i-v3s-pwm",
- "allwinner,sun7i-a20-pwm";
- reg = <0x01c21400 0xc>;
- clocks = <&osc24M>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- lradc: lradc at 1c22800 {
- compatible = "allwinner,sun4i-a10-lradc-keys";
- reg = <0x01c22800 0x400>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- codec: codec at 1c22c00 {
- #sound-dai-cells = <0>;
- compatible = "allwinner,sun8i-v3s-codec";
- reg = <0x01c22c00 0x400>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
- clock-names = "apb", "codec";
- resets = <&ccu RST_BUS_CODEC>;
- dmas = <&dma 15>, <&dma 15>;
- dma-names = "rx", "tx";
- allwinner,codec-analog-controls = <&codec_analog>;
- status = "disabled";
- };
-
- codec_analog: codec-analog at 1c23000 {
- compatible = "allwinner,sun8i-v3s-codec-analog";
- reg = <0x01c23000 0x4>;
- };
-
- uart0: serial at 1c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART0>;
- dmas = <&dma 6>, <&dma 6>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART0>;
- status = "disabled";
- };
-
- uart1: serial at 1c28400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28400 0x400>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART1>;
- dmas = <&dma 7>, <&dma 7>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART1>;
- status = "disabled";
- };
-
- uart2: serial at 1c28800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28800 0x400>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&ccu CLK_BUS_UART2>;
- dmas = <&dma 8>, <&dma 8>;
- dma-names = "tx", "rx";
- resets = <&ccu RST_BUS_UART2>;
- pinctrl-0 = <&uart2_pins>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
- i2c0: i2c at 1c2ac00 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2ac00 0x400>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C0>;
- resets = <&ccu RST_BUS_I2C0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c1: i2c at 1c2b000 {
- compatible = "allwinner,sun6i-a31-i2c";
- reg = <0x01c2b000 0x400>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_I2C1>;
- resets = <&ccu RST_BUS_I2C1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- emac: ethernet at 1c30000 {
- compatible = "allwinner,sun8i-v3s-emac";
- syscon = <&syscon>;
- reg = <0x01c30000 0x10000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- resets = <&ccu RST_BUS_EMAC>;
- reset-names = "stmmaceth";
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
- phy-handle = <&int_mii_phy>;
- phy-mode = "mii";
- status = "disabled";
-
- mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- };
-
- mdio_mux: mdio-mux {
- compatible = "allwinner,sun8i-h3-mdio-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- mdio-parent-bus = <&mdio>;
- /* Only one MDIO is usable at the time */
- internal_mdio: mdio at 1 {
- compatible = "allwinner,sun8i-h3-mdio-internal";
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- int_mii_phy: ethernet-phy at 1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
- };
- };
- };
- };
-
- spi0: spi at 1c68000 {
- compatible = "allwinner,sun8i-h3-spi";
- reg = <0x01c68000 0x1000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- dmas = <&dma 23>, <&dma 23>;
- dma-names = "rx", "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_pins>;
- resets = <&ccu RST_BUS_SPI0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- gic: interrupt-controller at 1c81000 {
- compatible = "arm,gic-400";
- reg = <0x01c81000 0x1000>,
- <0x01c82000 0x2000>,
- <0x01c84000 0x2000>,
- <0x01c86000 0x2000>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- csi1: camera at 1cb4000 {
- compatible = "allwinner,sun8i-v3s-csi";
- reg = <0x01cb4000 0x3000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_CSI>,
- <&ccu CLK_CSI1_SCLK>,
- <&ccu CLK_DRAM_CSI>;
- clock-names = "bus", "mod", "ram";
- resets = <&ccu RST_BUS_CSI>;
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index f0faa9f80a23..12981adbd042 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -572,6 +572,7 @@ config MACH_SUN8I_V3_V3S
select SUNXI_DRAM_DW_16BIT
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+ imply OF_UPSTREAM
config RESERVE_ALLWINNER_BOOT0_HEADER
bool "reserve space for Allwinner boot0 header"
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
index 299deb0195a2..de695b362b44 100644
--- a/configs/LicheePi_Zero_defconfig
+++ b/configs/LicheePi_Zero_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun8i-v3s-licheepi-zero"
CONFIG_SPL=y
CONFIG_MACH_SUN8I_V3S=y
CONFIG_NO_NET=y
diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index ac3e7fbb4317..2b2fb88c4933 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-s3-pinecube"
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun8i-s3-pinecube"
CONFIG_SPL=y
CONFIG_MACH_SUN8I_V3=y
CONFIG_DRAM_CLK=504
--
2.49.0
More information about the U-Boot
mailing list