[PATCH] arm64: renesas: r8a779g3: Enable xHCI USB on Retronix R-Car V4H Sparrow Hawk board

[Marek Vasut]

Enable support for PCIe based xHCI USB 3.0 driver and USB mass
storage support on Retronix R-Car V4H Sparrow Hawk board .

Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: Tom Rini <trini at konsulko.com>
---
 configs/r8a779g3_sparrowhawk_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/configs/r8a779g3_sparrowhawk_defconfig b/configs/r8a779g3_sparrowhawk_defconfig
index bb8d110dc0d..9cee4d287ef 100644
--- a/configs/r8a779g3_sparrowhawk_defconfig
+++ b/configs/r8a779g3_sparrowhawk_defconfig
@@ -25,6 +25,7 @@ CONFIG_GPIO_HOG=y
 CONFIG_REMOTEPROC_RENESAS_APMU=y
 CONFIG_BITBANGMII=y
 CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NVME_PCI=y
 CONFIG_PCI=y
@@ -34,6 +35,14 @@ CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_RENESAS_RAVB=y
 CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_XHCI_GENERIC=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+# CONFIG_USB_XHCI_RCAR is not set
 
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_HAVE_INIT_STACK=y
-- 
2.47.2