[PATCH] net: axi_emac: Fix timeout test

[Andrew Goodbody]

The timeout test in axi_dma_init is not correct due to the
post-decrement used on the timeout variable which will mean timeout is
not 0 if the timeout occurs. Make the timeout variable an int instead of
a u32 and then test for timeout being -1.

This issue was found by Smatch.

Signed-off-by: Andrew Goodbody <andrew.goodbody at linaro.org>
---
 drivers/net/xilinx_axi_emac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index c8038ddef1b..c46678c1f3b 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -558,7 +558,7 @@ static int axiemac_write_hwaddr(struct udevice *dev)
 /* Reset DMA engine */
 static void axi_dma_init(struct axidma_priv *priv)
 {
-	u32 timeout = 500;
+	int timeout = 500;
 
 	/* Reset the engine so the hardware starts from a known state */
 	writel(XAXIDMA_CR_RESET_MASK, &priv->dmatx->control);
@@ -574,7 +574,7 @@ static void axi_dma_init(struct axidma_priv *priv)
 			break;
 		}
 	}
-	if (!timeout)
+	if (timeout == -1)
 		printf("%s: Timeout\n", __func__);
 }
 

---
base-commit: 007610da2cca405ea7739fc120d90085be4b6ac2
change-id: 20250806-net_xilinx_axi-9ca9a791d611

Best regards,
-- 
Andrew Goodbody <andrew.goodbody at linaro.org>