[PATCH v4 16/24] mtd: spinand: Add read retry support

[Mikhail Kshevetskiy]

From: Cheng Ming Lin <chengminglin at mxic.com.tw>

When the host ECC fails to correct the data error of NAND device,
there's a special read for data recovery method which can be setup
by the host for the next read. There are several retry levels that
can be attempted until the lost data is recovered or definitely
assumed lost.

This is the port of linux commit f2cb43c98010181b532ff36643731dc2442b9b7d
(mtd: spinand: Add read retry support)

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy at iopsys.eu>
---
 drivers/mtd/nand/spi/core.c | 35 +++++++++++++++++++++++++++++++++--
 include/linux/mtd/spinand.h | 15 +++++++++++++++
 2 files changed, 48 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index a52cc91dd3c..b3418624e3e 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -675,11 +675,15 @@ static int spinand_mtd_regular_page_read(struct mtd_info *mtd, loff_t from,
 {
 	struct spinand_device *spinand = mtd_to_spinand(mtd);
 	struct nand_device *nand = mtd_to_nanddev(mtd);
+	struct mtd_ecc_stats old_stats;
 	struct nand_io_iter iter;
 	bool disable_ecc = false;
 	bool ecc_failed = false;
+	unsigned int retry_mode = 0;
 	int ret;
 
+	old_stats = mtd->ecc_stats;
+
 	if (ops->mode == MTD_OPS_RAW || !mtd->ooblayout)
 		disable_ecc = true;
 
@@ -692,18 +696,43 @@ static int spinand_mtd_regular_page_read(struct mtd_info *mtd, loff_t from,
 		if (ret)
 			break;
 
+read_retry:
 		ret = spinand_read_page(spinand, &iter.req);
 		if (ret < 0 && ret != -EBADMSG)
 			break;
 
-		if (ret == -EBADMSG)
+		if (ret == -EBADMSG && spinand->set_read_retry) {
+			if (spinand->read_retries && (++retry_mode <= spinand->read_retries)) {
+				ret = spinand->set_read_retry(spinand, retry_mode);
+				if (ret < 0) {
+					spinand->set_read_retry(spinand, 0);
+					return ret;
+				}
+
+				/* Reset ecc_stats; retry */
+				mtd->ecc_stats = old_stats;
+				goto read_retry;
+			} else {
+				/* No more retry modes; real failure */
+				ecc_failed = true;
+			}
+		} else if (ret == -EBADMSG) {
 			ecc_failed = true;
-		else
+		} else {
 			*max_bitflips = max_t(unsigned int, *max_bitflips, ret);
+		}
 
 		ret = 0;
 		ops->retlen += iter.req.datalen;
 		ops->oobretlen += iter.req.ooblen;
+
+		/* Reset to retry mode 0 */
+		if (retry_mode) {
+			retry_mode = 0;
+			ret = spinand->set_read_retry(spinand, retry_mode);
+			if (ret < 0)
+				return ret;
+		}
 	}
 
 	if (ecc_failed && !ret)
@@ -1297,6 +1326,8 @@ int spinand_match_and_init(struct spinand_device *spinand,
 		spinand->id.len = 1 + table[i].devid.len;
 		spinand->select_target = table[i].select_target;
 		spinand->set_cont_read = table[i].set_cont_read;
+		spinand->read_retries = table[i].read_retries;
+		spinand->set_read_retry = table[i].set_read_retry;
 
 		op = spinand_select_op_variant(spinand,
 					       info->op_variants.read_cache);
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 2f8212e4037..44c616a4acf 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -337,6 +337,8 @@ struct spinand_ecc_info {
  * @select_target: function used to select a target/die. Required only for
  *		   multi-die chips
  * @set_cont_read: enable/disable continuous cached reads
+ * @read_retries: the number of read retry modes supported
+ * @set_read_retry: enable/disable read retry for data recovery
  *
  * Each SPI NAND manufacturer driver should have a spinand_info table
  * describing all the chips supported by the driver.
@@ -357,6 +359,9 @@ struct spinand_info {
 			     unsigned int target);
 	int (*set_cont_read)(struct spinand_device *spinand,
 			     bool enable);
+	unsigned int read_retries;
+	int (*set_read_retry)(struct spinand_device *spinand,
+			     unsigned int read_retry);
 };
 
 #define SPINAND_ID(__method, ...)					\
@@ -385,6 +390,10 @@ struct spinand_info {
 #define SPINAND_CONT_READ(__set_cont_read)				\
 	.set_cont_read = __set_cont_read,
 
+#define SPINAND_READ_RETRY(__read_retries, __set_read_retry)		\
+	.read_retries = __read_retries,					\
+	.set_read_retry = __set_read_retry
+
 #define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants,	\
 		     __flags, ...)					\
 	{								\
@@ -435,6 +444,8 @@ struct spinand_dirmap {
  *		actually relevant to enable this feature.
  * @set_cont_read: Enable/disable the continuous read feature
  * @priv: manufacturer private data
+ * @read_retries: the number of read retry modes supported
+ * @set_read_retry: Enable/disable the read retry feature
  * @last_wait_status: status of the last wait operation that will be used in case
  *		      ->get_status() is not populated by the spinand device.
  */
@@ -475,6 +486,10 @@ struct spinand_device {
 	bool cont_read_possible;
 	int (*set_cont_read)(struct spinand_device *spinand,
 			     bool enable);
+
+	unsigned int read_retries;
+	int (*set_read_retry)(struct spinand_device *spinand,
+			     unsigned int retry_mode);
 };
 
 /**
-- 
2.47.2