[PATCH] board: spacemit: Add SpacemiT MUSE Pi Pro

[Leo Liang]

On Mon, Jul 28, 2025 at 06:06:07PM +0800, Yixun Lan wrote:
> [EXTERNAL MAIL]
> 
> Hi Niu,
> 
>   You need to split the patch, and prepare a cover letter..
> 
>   Have to say, generally, this patch isn't really different comparing
> with current in tree bananapi-f3, so neither it is useful..
> 
>   I personally would expect to see more drivers support for K1 SoC,
> then figure out how to have more boards enabled..
>   (I'd propose to not merge this patch, but if maintainer is ok with
>   this, then I'd have no objection)

Hi Niu and Yixun,

I am OK merging the patch for new board,
but as Yixun and Yao's suggestion,
there are some modifications need to be made.
Please follow the advice and re-spin a patchset, thanks!

Best regards,
Leo

> 
>   CC spacemit mailing list for more wide comments
> 
> On 16:25 Mon 28 Jul     , Niu Zhihong wrote:
> > MUSE Pi Pro uses spacemit K1,
> > a new generation of octa-core 64-bit RISC-V processor,
> > which includes octa-core X60.
> >
> > Features tested on a MUSE Pi Pro 16GB:
> > - SD-card boot
> > - eMMC boot
> this brings some confusions, as currently there is no SD/eMMC driver support
> for K1, only means it's able to boot from SD/eMMC (with brom support)
> 
> >
> > Signed-off-by: Niu Zhihong <zhihong at nzhnb.com>
> > ---
> >  arch/riscv/Kconfig                     |  4 ++
> >  arch/riscv/dts/Makefile                |  1 +
> >  arch/riscv/dts/k1-muse-pi-pro.dts      | 27 ++++++++
> >  board/spacemit/muse-pi-pro/Kconfig     | 37 +++++++++++
> >  board/spacemit/muse-pi-pro/MAINTAINERS |  6 ++
> >  board/spacemit/muse-pi-pro/Makefile    |  3 +
> >  board/spacemit/muse-pi-pro/board.c     |  8 +++
> >  configs/muse-pi-pro_defconfig          |  6 ++
> >  doc/board/spacemit/index.rst           |  1 +
> >  doc/board/spacemit/muse-pi-pro.rst     | 85 ++++++++++++++++++++++++++
> >  include/configs/muse-pi-pro.h          | 11 ++++
> >  11 files changed, 189 insertions(+)
> >  create mode 100644 arch/riscv/dts/k1-muse-pi-pro.dts
> >  create mode 100644 board/spacemit/muse-pi-pro/Kconfig
> >  create mode 100644 board/spacemit/muse-pi-pro/MAINTAINERS
> >  create mode 100644 board/spacemit/muse-pi-pro/Makefile
> >  create mode 100644 board/spacemit/muse-pi-pro/board.c
> >  create mode 100644 configs/muse-pi-pro_defconfig
> >  create mode 100644 doc/board/spacemit/muse-pi-pro.rst
> >  create mode 100644 include/configs/muse-pi-pro.h