[PATCH 0/2] PHYTEC imx8m boards: enable OP-TEE as default

[Yannic Moog]

OPTEE config was unset by default and the doc for the boards was not
quite accurate as TEE configs must be enabled first in order to be able
to build with OP-TEE support.
This series enables the config by default, i.e. when wanting to build
without OP-TEE now, configs need to be modified.
Update and clean up the documentation:
Change instructions on how to build bootable image with the new OP-TEE
related changes.

---
Yannic Moog (2):
      phytec-imx8m boards: enable OP-TEE for KASLR
      doc: phytec: update imx8m docs for optee builds

 board/phytec/phycore_imx8mm/MAINTAINERS     |  1 -
 configs/imx8mm-phygate-tauri-l_defconfig    |  5 +++-
 configs/phycore-imx8mm_defconfig            |  5 +++-
 configs/phycore-imx8mp_defconfig            |  4 +++
 doc/board/phytec/imx8mm-optee-build.rsti    | 14 ----------
 doc/board/phytec/imx8mm-phygate-tauri-l.rst | 42 ++++++++++++++++++----------
 doc/board/phytec/phycore-imx8mm.rst         | 43 +++++++++++++++++++----------
 doc/board/phytec/phycore-imx8mp.rst         | 32 +++++++++++----------
 8 files changed, 86 insertions(+), 60 deletions(-)
---
base-commit: b6e2cfca1a6fd10c8f12016a40d690d2ec61796c
change-id: 20250730-imx8m-optee-enable-dd28b305167e

Best regards,
-- 
Yannic Moog <y.moog at phytec.de>