[PATCH 4/4] dts: th1520: Switch to upstream devicetree
Yao Zi
ziyao at disroot.org
Wed Aug 13 12:09:27 CEST 2025
Imply OF_UPSTREAM in platform Kconfig option and adapt existing boards
to use the correct upstream devicetree paths.
Signed-off-by: Yao Zi <ziyao at disroot.org>
---
arch/riscv/cpu/th1520/Kconfig | 1 +
arch/riscv/dts/Makefile | 1 -
.../dts/th1520-lichee-module-4a-u-boot.dtsi | 10 +
arch/riscv/dts/th1520-lichee-module-4a.dtsi | 164 ------
.../riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi | 27 +
arch/riscv/dts/th1520-lichee-pi-4a.dts | 33 --
arch/riscv/dts/th1520-u-boot.dtsi | 44 ++
arch/riscv/dts/th1520.dtsi | 530 ------------------
configs/th1520_lpi4a_defconfig | 2 +-
9 files changed, 83 insertions(+), 729 deletions(-)
create mode 100644 arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi
delete mode 100644 arch/riscv/dts/th1520-lichee-module-4a.dtsi
create mode 100644 arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi
delete mode 100644 arch/riscv/dts/th1520-lichee-pi-4a.dts
create mode 100644 arch/riscv/dts/th1520-u-boot.dtsi
delete mode 100644 arch/riscv/dts/th1520.dtsi
diff --git a/arch/riscv/cpu/th1520/Kconfig b/arch/riscv/cpu/th1520/Kconfig
index c73462c04b8..a02f5f24906 100644
--- a/arch/riscv/cpu/th1520/Kconfig
+++ b/arch/riscv/cpu/th1520/Kconfig
@@ -21,3 +21,4 @@ config THEAD_TH1520
imply SPL_CPU
imply SPL_OPENSBI
imply SPL_LOAD_FIT
+ imply OF_UPSTREAM
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 2b10c2d6c01..1b2e8dd3d4e 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -11,7 +11,6 @@ dtb-$(CONFIG_TARGET_OPENPITON_RISCV64) += openpiton-riscv64.dtb
dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb
dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb
dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
-dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb
dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb
dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv64.dtb
dtb-$(CONFIG_TARGET_ASPEED_AST2700_IBEX) += ast2700-ibex.dtb
diff --git a/arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi b/arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi
new file mode 100644
index 00000000000..bbfa3c499cf
--- /dev/null
+++ b/arch/riscv/dts/th1520-lichee-module-4a-u-boot.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Yao Zi <ziyao at disroot.org>
+ */
+
+#include "th1520-u-boot.dtsi"
+
+&{/memory at 0} {
+ bootph-pre-ram;
+};
diff --git a/arch/riscv/dts/th1520-lichee-module-4a.dtsi b/arch/riscv/dts/th1520-lichee-module-4a.dtsi
deleted file mode 100644
index eecd3e9832a..00000000000
--- a/arch/riscv/dts/th1520-lichee-module-4a.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
- */
-
-/dts-v1/;
-
-#include "th1520.dtsi"
-
-/ {
- model = "Sipeed Lichee Module 4A";
- compatible = "sipeed,lichee-module-4a", "thead,th1520";
-
- aliases {
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
- };
-
- memory at 0 {
- device_type = "memory";
- reg = <0x0 0x00000000 0x2 0x00000000>;
- bootph-pre-ram;
- };
-};
-
-&osc {
- clock-frequency = <24000000>;
-};
-
-&osc_32k {
- clock-frequency = <32768>;
-};
-
-&emmc {
- bus-width = <8>;
- max-frequency = <198000000>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- no-sdio;
- no-sd;
- status = "okay";
-};
-
-&gmac0 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac0_pins>, <&mdio0_pins>;
- phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
- status = "okay";
-};
-
-&gmac1 {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac1_pins>;
- phy-handle = <&phy1>;
- phy-mode = "rgmii-id";
- status = "okay";
-};
-
-&mdio0 {
- phy0: ethernet-phy at 1 {
- reg = <1>;
- };
-
- phy1: ethernet-phy at 2 {
- reg = <2>;
- };
-};
-
-&padctrl0_apsys {
- gmac0_pins: gmac0-0 {
- tx-pins {
- pins = "GMAC0_TX_CLK",
- "GMAC0_TXEN",
- "GMAC0_TXD0",
- "GMAC0_TXD1",
- "GMAC0_TXD2",
- "GMAC0_TXD3";
- function = "gmac0";
- bias-disable;
- drive-strength = <25>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pins = "GMAC0_RX_CLK",
- "GMAC0_RXDV",
- "GMAC0_RXD0",
- "GMAC0_RXD1",
- "GMAC0_RXD2",
- "GMAC0_RXD3";
- function = "gmac0";
- bias-disable;
- drive-strength = <1>;
- input-enable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- gmac1_pins: gmac1-0 {
- tx-pins {
- pins = "GPIO2_18", /* GMAC1_TX_CLK */
- "GPIO2_20", /* GMAC1_TXEN */
- "GPIO2_21", /* GMAC1_TXD0 */
- "GPIO2_22", /* GMAC1_TXD1 */
- "GPIO2_23", /* GMAC1_TXD2 */
- "GPIO2_24"; /* GMAC1_TXD3 */
- function = "gmac1";
- bias-disable;
- drive-strength = <25>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- rx-pins {
- pins = "GPIO2_19", /* GMAC1_RX_CLK */
- "GPIO2_25", /* GMAC1_RXDV */
- "GPIO2_30", /* GMAC1_RXD0 */
- "GPIO2_31", /* GMAC1_RXD1 */
- "GPIO3_0", /* GMAC1_RXD2 */
- "GPIO3_1"; /* GMAC1_RXD3 */
- function = "gmac1";
- bias-disable;
- drive-strength = <1>;
- input-enable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
- };
-
- mdio0_pins: mdio0-0 {
- mdc-pins {
- pins = "GMAC0_MDC";
- function = "gmac0";
- bias-disable;
- drive-strength = <13>;
- input-disable;
- input-schmitt-disable;
- slew-rate = <0>;
- };
-
- mdio-pins {
- pins = "GMAC0_MDIO";
- function = "gmac0";
- bias-disable;
- drive-strength = <13>;
- input-enable;
- input-schmitt-enable;
- slew-rate = <0>;
- };
- };
-};
-
-&sdio0 {
- bus-width = <4>;
- max-frequency = <198000000>;
- status = "okay";
-};
diff --git a/arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi b/arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi
new file mode 100644
index 00000000000..06d4a70d1ea
--- /dev/null
+++ b/arch/riscv/dts/th1520-lichee-pi-4a-u-boot.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Yao Zi <ziyao at disroot.org>
+ */
+
+#include "th1520-lichee-module-4a-u-boot.dtsi"
+#include "thead-th1520-binman.dtsi"
+
+&clk {
+ bootph-some-ram;
+};
+
+&padctrl0_apsys {
+ bootph-some-ram;
+};
+
+&uart0_pins {
+ bootph-some-ram;
+
+ tx-pins {
+ bootph-some-ram;
+ };
+
+ rx-pins {
+ bootph-some-ram;
+ };
+};
diff --git a/arch/riscv/dts/th1520-lichee-pi-4a.dts b/arch/riscv/dts/th1520-lichee-pi-4a.dts
deleted file mode 100644
index 49af88b7adf..00000000000
--- a/arch/riscv/dts/th1520-lichee-pi-4a.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
- */
-
-#include "th1520-lichee-module-4a.dtsi"
-#include "thead-th1520-binman.dtsi"
-
-/ {
- model = "Sipeed Lichee Pi 4A";
- compatible = "sipeed,lichee-pi-4a", "sipeed,lichee-module-4a", "thead,th1520";
-
- aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/riscv/dts/th1520-u-boot.dtsi b/arch/riscv/dts/th1520-u-boot.dtsi
new file mode 100644
index 00000000000..45ffccbb847
--- /dev/null
+++ b/arch/riscv/dts/th1520-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 Yao Zi <ziyao at disroot.org>
+ */
+
+&{/soc} {
+ ddrc: ddrc at fffd000000 {
+ compatible = "thead,th1520-ddrc";
+ reg = <0xff 0xfd000000 0x0 0x1000000>,
+ <0xff 0xfe000000 0x0 0x1000000>,
+ <0xff 0xff000000 0x0 0x4000>,
+ <0xff 0xff005000 0x0 0x1000>;
+ reg-names = "phy-0", "phy-1", "ctrl", "sys";
+ bootph-pre-ram;
+ };
+};
+
+&cpus {
+ bootph-pre-ram;
+};
+
+&c910_0 {
+ bootph-pre-ram;
+};
+
+&c910_1 {
+ bootph-pre-ram;
+};
+
+&c910_2 {
+ bootph-pre-ram;
+};
+
+&c910_3 {
+ bootph-pre-ram;
+};
+
+&clint {
+ bootph-pre-ram;
+};
+
+&uart0 {
+ bootph-pre-ram;
+};
diff --git a/arch/riscv/dts/th1520.dtsi b/arch/riscv/dts/th1520.dtsi
deleted file mode 100644
index c46925a132a..00000000000
--- a/arch/riscv/dts/th1520.dtsi
+++ /dev/null
@@ -1,530 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 Alibaba Group Holding Limited.
- * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
- */
-
-#include <dt-bindings/clock/thead,th1520-clk-ap.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "thead,th1520";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus: cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- bootph-pre-ram;
- timebase-frequency = <3000000>;
-
- c910_0: cpu at 0 {
- compatible = "thead,c910", "riscv";
- device_type = "cpu";
- riscv,isa = "rv64imafdc";
- reg = <0>;
- bootph-pre-ram;
- i-cache-block-size = <64>;
- i-cache-size = <65536>;
- i-cache-sets = <512>;
- d-cache-block-size = <64>;
- d-cache-size = <65536>;
- d-cache-sets = <512>;
- next-level-cache = <&l2_cache>;
- mmu-type = "riscv,sv39";
-
- cpu0_intc: interrupt-controller {
- compatible = "riscv,cpu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- c910_1: cpu at 1 {
- compatible = "thead,c910", "riscv";
- device_type = "cpu";
- riscv,isa = "rv64imafdc";
- reg = <1>;
- bootph-pre-ram;
- i-cache-block-size = <64>;
- i-cache-size = <65536>;
- i-cache-sets = <512>;
- d-cache-block-size = <64>;
- d-cache-size = <65536>;
- d-cache-sets = <512>;
- next-level-cache = <&l2_cache>;
- mmu-type = "riscv,sv39";
-
- cpu1_intc: interrupt-controller {
- compatible = "riscv,cpu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- c910_2: cpu at 2 {
- compatible = "thead,c910", "riscv";
- device_type = "cpu";
- riscv,isa = "rv64imafdc";
- reg = <2>;
- bootph-pre-ram;
- i-cache-block-size = <64>;
- i-cache-size = <65536>;
- i-cache-sets = <512>;
- d-cache-block-size = <64>;
- d-cache-size = <65536>;
- d-cache-sets = <512>;
- next-level-cache = <&l2_cache>;
- mmu-type = "riscv,sv39";
-
- cpu2_intc: interrupt-controller {
- compatible = "riscv,cpu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- c910_3: cpu at 3 {
- compatible = "thead,c910", "riscv";
- device_type = "cpu";
- riscv,isa = "rv64imafdc";
- reg = <3>;
- bootph-pre-ram;
- i-cache-block-size = <64>;
- i-cache-size = <65536>;
- i-cache-sets = <512>;
- d-cache-block-size = <64>;
- d-cache-size = <65536>;
- d-cache-sets = <512>;
- next-level-cache = <&l2_cache>;
- mmu-type = "riscv,sv39";
-
- cpu3_intc: interrupt-controller {
- compatible = "riscv,cpu-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
-
- l2_cache: l2-cache {
- compatible = "cache";
- cache-block-size = <64>;
- cache-level = <2>;
- cache-size = <1048576>;
- cache-sets = <1024>;
- cache-unified;
- };
- };
-
- osc: oscillator {
- compatible = "fixed-clock";
- clock-output-names = "osc_24m";
- #clock-cells = <0>;
- };
-
- osc_32k: 32k-oscillator {
- compatible = "fixed-clock";
- clock-output-names = "osc_32k";
- #clock-cells = <0>;
- };
-
- aonsys_clk: clock-73728000 {
- compatible = "fixed-clock";
- clock-frequency = <73728000>;
- clock-output-names = "aonsys_clk";
- #clock-cells = <0>;
- };
-
- soc {
- compatible = "simple-bus";
- interrupt-parent = <&plic>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- plic: interrupt-controller at ffd8000000 {
- compatible = "thead,th1520-plic", "thead,c900-plic";
- reg = <0xff 0xd8000000 0x0 0x01000000>;
- interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
- <&cpu1_intc 11>, <&cpu1_intc 9>,
- <&cpu2_intc 11>, <&cpu2_intc 9>,
- <&cpu3_intc 11>, <&cpu3_intc 9>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- riscv,ndev = <240>;
- };
-
- clint: timer at ffdc000000 {
- compatible = "thead,th1520-clint", "thead,c900-clint";
- reg = <0xff 0xdc000000 0x0 0x00010000>;
- bootph-pre-ram;
- interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
- <&cpu1_intc 3>, <&cpu1_intc 7>,
- <&cpu2_intc 3>, <&cpu2_intc 7>,
- <&cpu3_intc 3>, <&cpu3_intc 7>;
- };
-
- uart0: serial at ffe7014000 {
- compatible = "snps,dw-apb-uart";
- reg = <0xff 0xe7014000 0x0 0x100>;
- bootph-pre-ram;
- interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>;
- clock-names = "buadclk", "apb_pclk";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- gmac1: ethernet at ffe7060000 {
- compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
- reg = <0xff 0xe7060000 0x0 0x2000>, <0xff 0xec004000 0x0 0x1000>;
- reg-names = "dwmac", "apb";
- interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>;
- clock-names = "stmmaceth", "pclk";
- snps,pbl = <32>;
- snps,fixed-burst;
- snps,multicast-filter-bins = <64>;
- snps,perfect-filter-entries = <32>;
- status = "disabled";
-
- mdio1: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- gmac0: ethernet at ffe7070000 {
- compatible = "thead,th1520-gmac", "snps,dwmac-3.70a";
- reg = <0xff 0xe7070000 0x0 0x2000>, <0xff 0xec003000 0x0 0x1000>;
- reg-names = "dwmac", "apb";
- interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
- clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>;
- clock-names = "stmmaceth", "pclk";
- snps,pbl = <32>;
- snps,fixed-burst;
- snps,multicast-filter-bins = <64>;
- snps,perfect-filter-entries = <32>;
- status = "disabled";
-
- mdio0: mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- emmc: mmc at ffe7080000 {
- compatible = "thead,th1520-dwcmshc";
- reg = <0xff 0xe7080000 0x0 0x10000>;
- interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_EMMC_SDIO>;
- clock-names = "core";
- status = "disabled";
- };
-
- sdio0: mmc at ffe7090000 {
- compatible = "thead,th1520-dwcmshc";
- reg = <0xff 0xe7090000 0x0 0x10000>;
- interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_EMMC_SDIO>;
- clock-names = "core";
- status = "disabled";
- };
-
- sdio1: mmc at ffe70a0000 {
- compatible = "thead,th1520-dwcmshc";
- reg = <0xff 0xe70a0000 0x0 0x10000>;
- interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_EMMC_SDIO>;
- clock-names = "core";
- status = "disabled";
- };
-
- uart1: serial at ffe7f00000 {
- compatible = "snps,dw-apb-uart";
- reg = <0xff 0xe7f00000 0x0 0x100>;
- interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>;
- clock-names = "buadclk", "apb_pclk";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart3: serial at ffe7f04000 {
- compatible = "snps,dw-apb-uart";
- reg = <0xff 0xe7f04000 0x0 0x100>;
- interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>;
- clock-names = "buadclk", "apb_pclk";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- gpio2: gpio at ffe7f34000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xff 0xe7f34000 0x0 0x1000>;
- clocks = <&clk CLK_GPIO2>;
- clock-names = "bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- portc: gpio-controller at 0 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- gpio3: gpio at ffe7f38000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xff 0xe7f38000 0x0 0x1000>;
- clocks = <&clk CLK_GPIO3>;
- clock-names = "bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- portd: gpio-controller at 0 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- padctrl1_apsys: pinctrl at ffe7f3c000 {
- compatible = "thead,th1520-pinctrl";
- reg = <0xff 0xe7f3c000 0x0 0x1000>;
- clocks = <&clk CLK_PADCTRL1>;
- thead,pad-group = <2>;
- };
-
- gpio0: gpio at ffec005000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xff 0xec005000 0x0 0x1000>;
- clocks = <&clk CLK_GPIO0>;
- clock-names = "bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- porta: gpio-controller at 0 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- gpio1: gpio at ffec006000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xff 0xec006000 0x0 0x1000>;
- clocks = <&clk CLK_GPIO1>;
- clock-names = "bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- portb: gpio-controller at 0 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- padctrl0_apsys: pinctrl at ffec007000 {
- compatible = "thead,th1520-pinctrl";
- reg = <0xff 0xec007000 0x0 0x1000>;
- clocks = <&clk CLK_PADCTRL0>;
- thead,pad-group = <3>;
- };
-
- uart2: serial at ffec010000 {
- compatible = "snps,dw-apb-uart";
- reg = <0xff 0xec010000 0x0 0x4000>;
- interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>;
- clock-names = "buadclk", "apb_pclk";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- clk: clock-controller at ffef010000 {
- compatible = "thead,th1520-clk-ap";
- reg = <0xff 0xef010000 0x0 0x1000>;
- clocks = <&osc>;
- #clock-cells = <1>;
- };
-
- timer0: timer at ffefc32000 {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xefc32000 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- timer1: timer at ffefc32014 {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xefc32014 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- timer2: timer at ffefc32028 {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xefc32028 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- timer3: timer at ffefc3203c {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xefc3203c 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- uart4: serial at fff7f08000 {
- compatible = "snps,dw-apb-uart";
- reg = <0xff 0xf7f08000 0x0 0x4000>;
- interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>;
- clock-names = "buadclk", "apb_pclk";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart5: serial at fff7f0c000 {
- compatible = "snps,dw-apb-uart";
- reg = <0xff 0xf7f0c000 0x0 0x4000>;
- interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>;
- clock-names = "buadclk", "apb_pclk";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- ddrc: ddrc at fffd000000 {
- compatible = "thead,th1520-ddrc";
- reg = <0xff 0xfd000000 0x0 0x1000000>,
- <0xff 0xfe000000 0x0 0x1000000>,
- <0xff 0xff000000 0x0 0x4000>,
- <0xff 0xff005000 0x0 0x1000>;
- reg-names = "phy-0", "phy-1", "ctrl", "sys";
- bootph-pre-ram;
- };
-
- timer4: timer at ffffc33000 {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xffc33000 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- timer5: timer at ffffc33014 {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xffc33014 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- timer6: timer at ffffc33028 {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xffc33028 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- timer7: timer at ffffc3303c {
- compatible = "snps,dw-apb-timer";
- reg = <0xff 0xffc3303c 0x0 0x14>;
- clocks = <&clk CLK_PERI_APB_PCLK>;
- clock-names = "timer";
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- ao_gpio0: gpio at fffff41000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xff 0xfff41000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- porte: gpio-controller at 0 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- padctrl_aosys: pinctrl at fffff4a000 {
- compatible = "thead,th1520-pinctrl";
- reg = <0xff 0xfff4a000 0x0 0x2000>;
- clocks = <&aonsys_clk>;
- thead,pad-group = <1>;
- };
-
- ao_gpio1: gpio at fffff52000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xff 0xfff52000 0x0 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- portf: gpio-controller at 0 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
- };
-};
diff --git a/configs/th1520_lpi4a_defconfig b/configs/th1520_lpi4a_defconfig
index 731fe378ac8..1039c2ac54e 100644
--- a/configs/th1520_lpi4a_defconfig
+++ b/configs/th1520_lpi4a_defconfig
@@ -6,7 +6,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="th1520-lichee-pi-4a"
+CONFIG_DEFAULT_DEVICE_TREE="thead/th1520-lichee-pi-4a"
CONFIG_SPL_STACK=0xffe0170000
CONFIG_SPL_BSS_START_ADDR=0xffe0160000
CONFIG_SPL_BSS_MAX_SIZE=0x10000
--
2.50.1
More information about the U-Boot
mailing list