[PATCH v2 1/2] phytec-imx8m boards: enable OP-TEE for KASLR

[Yannic Moog]

Enable OP-TEE config and RNG by default.
Set OP-TEE load address to end of 1GiB RAM for phycore-imx8mp as the
board is supported in a 1GiB RAM variant.
For the imx8mm boards, only 2GiB versions are supported, so the default
at the end of 2GiB is sufficient.

Signed-off-by: Yannic Moog <y.moog at phytec.de>
---
 configs/imx8mm-phygate-tauri-l_defconfig | 5 ++++-
 configs/phycore-imx8mm_defconfig         | 5 ++++-
 configs/phycore-imx8mp_defconfig         | 4 ++++
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/configs/imx8mm-phygate-tauri-l_defconfig b/configs/imx8mm-phygate-tauri-l_defconfig
index 7369c0a05ac98315682127f0e96af7d36c4763d2..6dc95d6d3edbc0b4ed25a66d23f1b65435e01697 100644
--- a/configs/imx8mm-phygate-tauri-l_defconfig
+++ b/configs/imx8mm-phygate-tauri-l_defconfig
@@ -73,9 +73,9 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MM=y
+CONFIG_FSL_CAAM=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
-CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
 CONFIG_SUPPORT_EMMC_BOOT=y
@@ -97,11 +97,14 @@ CONFIG_IMX8M_POWER_DOMAIN=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RNG=y
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_WATCHDOG=y
diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig
index 4d6bce26f07f7b90e7c3674f4b9ddcac8d775e1d..4cf4d3972567bcf77d9ee7e2fda707070a778c72 100644
--- a/configs/phycore-imx8mm_defconfig
+++ b/configs/phycore-imx8mm_defconfig
@@ -82,9 +82,9 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MM=y
+CONFIG_FSL_CAAM=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
-CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
 CONFIG_SUPPORT_EMMC_BOOT=y
@@ -120,6 +120,7 @@ CONFIG_POWER_DOMAIN=y
 CONFIG_IMX8M_POWER_DOMAIN=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RNG=y
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
@@ -129,5 +130,7 @@ CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_WATCHDOG=y
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 6bd8bcf15daa95966aa973d8a493ebc1f05b14e9..c497f0bcd9131abab0b751ec9cc81194405b1f19 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -13,6 +13,7 @@ CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_SYS_I2C_MXC_I2C1=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-phyboard-pollux-rdk"
+CONFIG_IMX8M_OPTEE_LOAD_ADDR=0x7e000000
 CONFIG_TARGET_PHYCORE_IMX8MP=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
@@ -153,6 +154,7 @@ CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SPL_POWER_I2C=y
+CONFIG_DM_RNG=y
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
@@ -162,6 +164,8 @@ CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
 CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_DM_USB_GADGET=y

-- 
2.43.0