[PATCH 2/5] clk: rockchip: rk3368: add SCLK for mmc clock get/set

[WeiHao Li]

Because of dwmmc driver get clk form a fixed index 1, so must add
SCLK_SDMMC and SCLK_EMMC support to make emmc work.

Signed-off-by: WeiHao Li <cn.liweihao at gmail.com>
---
 drivers/clk/rockchip/clk_rk3368.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c
index 994330162..f9936fb40 100644
--- a/drivers/clk/rockchip/clk_rk3368.c
+++ b/drivers/clk/rockchip/clk_rk3368.c
@@ -165,9 +165,11 @@ static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id)
 
 	switch (clk_id) {
 	case HCLK_SDMMC:
+	case SCLK_SDMMC:
 		con_id = 50;
 		break;
 	case HCLK_EMMC:
+	case SCLK_EMMC:
 		con_id = 51;
 		break;
 	case SCLK_SDIO0:
@@ -262,9 +264,11 @@ static ulong rk3368_mmc_set_clk(struct clk *clk, ulong rate)
 
 	switch (clk_id) {
 	case HCLK_SDMMC:
+	case SCLK_SDMMC:
 		con_id = 50;
 		break;
 	case HCLK_EMMC:
+	case SCLK_EMMC:
 		con_id = 51;
 		break;
 	case SCLK_SDIO0:
@@ -559,6 +563,8 @@ static ulong rk3368_clk_get_rate(struct clk *clk)
 #if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC)
 	case HCLK_SDMMC:
 	case HCLK_EMMC:
+	case SCLK_SDMMC:
+	case SCLK_EMMC:
 		rate = rk3368_mmc_get_clk(priv->cru, clk->id);
 		break;
 #endif
@@ -597,6 +603,8 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
 #if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC)
 	case HCLK_SDMMC:
 	case HCLK_EMMC:
+	case SCLK_SDMMC:
+	case SCLK_EMMC:
 		ret = rk3368_mmc_set_clk(clk, rate);
 		break;
 #endif
-- 
2.39.5