[PATCH 2/4] board: phytec: common: k3: Use CONFIG_PHYTEC_EEPROM_BUS

[Wadim Egorov]

From: Dominik Haller <d.haller at phytec.de>

Use CONFIG_PHYTEC_EEPROM_BUS instead of the hard coded value for the i2c bus.

Signed-off-by: Dominik Haller <d.haller at phytec.de>
Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
 board/phytec/common/k3/board.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/phytec/common/k3/board.c b/board/phytec/common/k3/board.c
index 7f34d71d530..50d4a7c0d27 100644
--- a/board/phytec/common/k3/board.c
+++ b/board/phytec/common/k3/board.c
@@ -182,7 +182,7 @@ static void setup_mac_from_eeprom(void)
 	struct phytec_eeprom_data data;
 	int ret;
 
-	ret = phytec_eeprom_data_setup(&data, 0, EEPROM_ADDR);
+	ret = phytec_eeprom_data_setup(&data, CONFIG_PHYTEC_EEPROM_BUS, EEPROM_ADDR);
 	if (ret || !data.valid)
 		return;
 
@@ -245,7 +245,7 @@ static void fdt_apply_som_overlays(void *blob)
 
 	memcpy(fdt_copy, blob, fdt_size);
 
-	err = phytec_eeprom_data_setup(&data, 0, EEPROM_ADDR);
+	err = phytec_eeprom_data_setup(&data, CONFIG_PHYTEC_EEPROM_BUS, EEPROM_ADDR);
 	if (err)
 		goto fixup_error;
 
@@ -292,7 +292,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 	fdt_apply_som_overlays(blob);
 	fdt_copy_fixed_partitions(blob);
 
-	ret = phytec_eeprom_data_setup(&data, 0, EEPROM_ADDR);
+	ret = phytec_eeprom_data_setup(&data, CONFIG_PHYTEC_EEPROM_BUS, EEPROM_ADDR);
 	if (ret || !data.valid)
 		return 0;
 
-- 
2.48.1