[PATCH 0/6] Use correct LDO5 control registers for PCA9450

[Frieder Schrempf]

Hi Jaehoon,

Am 11.08.25 um 15:11 schrieb Frieder Schrempf:
> From: Frieder Schrempf <frieder.schrempf at kontron.de>
> 
> This is a port for the following series in Linux, which is already
> available in mainline:
> 
> https://patchwork.kernel.org/project/linux-arm-kernel/cover/20241218152842.97483-1-frieder@fris.de/
> 
> This aligns the PMIC driver with current Linux and allows to use
> upstream devicetrees in U-Boot.
> 
> Frieder Schrempf (6):
>   Revert "pmic: pca9450: Add optional SD_VSEL GPIO for LDO5"
>   pmic: pca9450: Fix enable register for LDO5
>   pmic: pca9450: Fix control register for LDO5
>   pmic: pca9450: Handle hardware with fixed SD_VSEL for LDO5
>   arm: dts: imx8mp-data-modul-edm-sbc: Remove deprecated sd-vsel-gpios
>   arm: dts: imx8mp-dhcom-som: Remove deprecated sd-vsel-gpios
> 
>  arch/arm/dts/imx8mp-data-modul-edm-sbc.dts |  1 -
>  arch/arm/dts/imx8mp-dhcom-som.dtsi         |  1 -
>  drivers/power/pmic/pca9450.c               | 22 -------------
>  drivers/power/regulator/pca9450.c          | 37 ++++++++++++++++++++--
>  4 files changed, 34 insertions(+), 27 deletions(-)
> 

I saw that there are several patches on the mailing list for
/drivers/power that have received no reply from a maintainer for several
weeks (see [1]). I just wanted to make sure that you are aware of this
and kindly ask to have a look.

Thanks
Frieder

[1]
https://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&state=1&q=&archive=both&delegate=12423