[PATCH 0/2] sunxi: A64: enable AXP driver support

[Peter Robinson]

On Wed, 7 May 2025 at 02:32, Andre Przywara <andre.przywara at arm.com> wrote:
>
> Hi,
>
> this series enables the build of the AXP driver in U-Boot proper for all
> boards using the Allwinner A64 SoC. So far some static PMIC rail setup
> was done by TF-A, but this was rather static (enabling too many) and
> increases the code size of the rather limited BL31 build.
>
> Do this for the A64 only first, since this uses RSB consistently, while
> the H6 boards are undergoing a transition to use I2C.
>
> Please have a look and test!

For the series:
Reviewed-by: Peter Robinson <pbrobinson at gmail.com>
Tested-by: Peter Robinson <pbrobinson at gmail.com>

Tested on a Pine64+, I enabled CMD_PMIC and CMD_REGULATOR and could
see all the expected details as well as in the output in 'dm tree' and
it boots and runs as expected with Fedora 43.

Peter

> Cheers,
> Andre
>
> Andre Przywara (2):
>   sunxi: A64: enable DRIVEVBUS support for respective boards
>   sunxi: A64: enable AXP drivers
>
>  arch/arm/Kconfig                     | 1 +
>  arch/arm/mach-sunxi/Kconfig          | 3 +++
>  configs/a64-olinuxino-emmc_defconfig | 1 +
>  configs/a64-olinuxino_defconfig      | 1 +
>  configs/amarula_a64_relic_defconfig  | 1 +
>  configs/bananapi_m64_defconfig       | 1 +
>  configs/orangepi_win_defconfig       | 1 +
>  configs/pinetab_defconfig            | 1 +
>  8 files changed, 10 insertions(+)
>
> --
> 2.46.3
>