[Upstream] [PATCH 2/2] board: phytec: phycore-imx93: Use CONFIG_PHYTEC_EEPROM_BUS

[Wadim Egorov]

On 8/28/25 11:20 AM, Primoz Fiser wrote:
> Switch to use CONFIG_PHYTEC_EEPROM_BUS instead of the hard coded value
> of 2 for the EEPROM I2C bus for both SPL and U-Boot proper. Possible
> since commit 88a1816a9b4e ("board: phytec: common: Add PHYTEC_EEPROM_BUS
> to Kconfig").

^ is this not a next-commit? I am not sure if the commit hash will survive.

> 
> Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>

Besides that,

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
>   board/phytec/phycore_imx93/phycore-imx93.c | 2 +-
>   board/phytec/phycore_imx93/spl.c           | 2 +-
>   configs/imx93-phycore_defconfig            | 1 +
>   3 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/board/phytec/phycore_imx93/phycore-imx93.c b/board/phytec/phycore_imx93/phycore-imx93.c
> index fab66caf2a1c..c6a4e923b074 100644
> --- a/board/phytec/phycore_imx93/phycore-imx93.c
> +++ b/board/phytec/phycore_imx93/phycore-imx93.c
> @@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR;
>   
>   int board_init(void)
>   {
> -	int ret = phytec_eeprom_data_setup(NULL, 2, EEPROM_ADDR);
> +	int ret = phytec_eeprom_data_setup(NULL, CONFIG_PHYTEC_EEPROM_BUS, EEPROM_ADDR);
>   
>   	if (ret)
>   		printf("%s: EEPROM data init failed\n", __func__);
> diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c
> index beaa536c6007..7feee4bcf6fa 100644
> --- a/board/phytec/phycore_imx93/spl.c
> +++ b/board/phytec/phycore_imx93/spl.c
> @@ -52,7 +52,7 @@ void spl_dram_init(void)
>   	int ret;
>   	enum phytec_imx93_ddr_eeprom_code ddr_opt = PHYTEC_IMX93_DDR_INVALID;
>   
> -	ret = phytec_eeprom_data_setup(NULL, 2, EEPROM_ADDR);
> +	ret = phytec_eeprom_data_setup(NULL, CONFIG_PHYTEC_EEPROM_BUS, EEPROM_ADDR);
>   	if (ret && !IS_ENABLED(CONFIG_PHYCORE_IMX93_RAM_TYPE_FIX))
>   		goto out;
>   
> diff --git a/configs/imx93-phycore_defconfig b/configs/imx93-phycore_defconfig
> index 53cd28dfcba6..0acdfd2bf53c 100644
> --- a/configs/imx93-phycore_defconfig
> +++ b/configs/imx93-phycore_defconfig
> @@ -7,6 +7,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>   CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=2
>   CONFIG_PHYTEC_SOM_DETECTION=y
> +CONFIG_PHYTEC_EEPROM_BUS=2
>   CONFIG_ENV_SOURCE_FILE="phycore_imx93"
>   CONFIG_ENV_SIZE=0x10000
>   CONFIG_ENV_OFFSET=0x700000