[PATCH 07/17] rockchip: odroid-go2: Update Kconfig options for SPL

[Kever Yang]

On 2025/7/14 07:33, Jonas Karlman wrote:
> Drop SPL_DRIVERS_MISC, it is not needed/used on these devices.
>
> Enable SPL_FIT_SIGNATURE to ensure the integrity of the FIT images
> that are loaded into memory.
>
> Change SPL_MAX_SIZE to 256 KiB, similar to other SoCs where TF-A is
> loaded at 0x40000 offset from start of DRAM.
>
> Enable SPL_DM_SEQ_ALIAS to ensure device aliases are applied in SPL.
>
> Drop use of SPL_TINY_MEMSET, there is plenty room for the normal memset.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/odroid-go2_defconfig | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
> index d6a63bd3a4cd..6bc0d12440c9 100644
> --- a/configs/odroid-go2_defconfig
> +++ b/configs/odroid-go2_defconfig
> @@ -10,7 +10,6 @@ CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_PX30=y
>   CONFIG_TARGET_ODROID_GO2=y
>   CONFIG_DEBUG_UART_CHANNEL=1
> -CONFIG_SPL_DRIVERS_MISC=y
>   CONFIG_SYS_LOAD_ADDR=0x800800
>   CONFIG_DEBUG_UART_BASE=0xFF160000
>   CONFIG_DEBUG_UART_CLOCK=24000000
> @@ -19,12 +18,13 @@ CONFIG_DEBUG_UART=y
>   CONFIG_FIT=y
>   CONFIG_FIT_VERBOSE=y
>   CONFIG_FIT_BEST_MATCH=y
> +CONFIG_SPL_FIT_SIGNATURE=y
>   CONFIG_SPL_LOAD_FIT=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3326-odroid-go2.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_BOARD_LATE_INIT=y
>   CONFIG_MISC_INIT_R=y
> -CONFIG_SPL_MAX_SIZE=0x20000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_BOOTROM_SUPPORT=y
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>   CONFIG_SPL_I2C=y
> @@ -53,6 +53,7 @@ CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
>   CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
>   CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
>   CONFIG_REGMAP=y
>   CONFIG_SPL_REGMAP=y
>   CONFIG_SYSCON=y
> @@ -90,7 +91,6 @@ CONFIG_USB_EHCI_HCD=y
>   CONFIG_USB_EHCI_GENERIC=y
>   CONFIG_USB_GADGET=y
>   CONFIG_USB_GADGET_DWC2_OTG=y
> -CONFIG_SPL_TINY_MEMSET=y
>   CONFIG_TPL_TINY_MEMSET=y
>   CONFIG_LZO=y
>   CONFIG_ERRNO_STR=y