[PATCH] power: qcom-rpmh-regulator: add support for pm6150l

[Luca Weiss]

Hi Jens,

On Wed Aug 27, 2025 at 1:33 AM CEST, Jens Reidel wrote:
> Provides the supplies for SD card on SM7150.

I've already sent a patch for this, which has gotten a review, but
hasn't been picked up yet:
https://lore.kernel.org/u-boot/20250618-sm6350-bringup-v1-6-3cc22aab7a7a@fairphone.com/

Regards
Luca

>
> Signed-off-by: Jens Reidel <adrian at mainlining.org>
> ---
>  drivers/power/regulator/qcom-rpmh-regulator.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/drivers/power/regulator/qcom-rpmh-regulator.c b/drivers/power/regulator/qcom-rpmh-regulator.c
> index 954deca5ed7..ac63c50e1d4 100644
> --- a/drivers/power/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/power/regulator/qcom-rpmh-regulator.c
> @@ -493,6 +493,19 @@ static const struct rpmh_vreg_hw_data pmic5_pldo515_mv = {
>  	.supply_name	= _supply_name, \
>  }
>  
> +static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
> +	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_pldo_lv,   "vdd-l1-l8"),
> +	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo,      "vdd-l4-l5-l6"),
> +	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l4-l5-l6"),
> +	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l4-l5-l6"),
> +	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l11"),
> +	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo,      "vdd-l1-l8"),
> +	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9-l10"),
> +	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
> +	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
> +	{}
> +};
> +
>  static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
>  	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l16-l17"),
>  	{}
> @@ -705,6 +718,10 @@ static int rpmh_regulators_bind(struct udevice *dev)
>  }
>  
>  static const struct udevice_id rpmh_regulator_ids[] = {
> +	{
> +		.compatible = "qcom,pm6150l-rpmh-regulators",
> +		.data = (ulong)pm6150l_vreg_data,
> +	},
>  	{
>  		.compatible = "qcom,pm8150-rpmh-regulators",
>  		.data = (ulong)pm8150_vreg_data,