[PATCH] configs: versal: update initial stack pointer

[Padmarao Begari]

The mini u-boot is hanging because of an initial stack
pointer address is used at half of the memory, when mini
u-boot is called reloc_fdt() function and doing memcpy()
for the fdt before relocation, and there is no sufficient
memory for the stack pointer. To fix, set an initial stack
pointer address to near the top of memory. The new stack
pointer address is assigned before calling the relocate
of u-boot based on the stack relocate calculation and
this new stack pointer is used while executing u-boot
from the relocated memory.

Signed-off-by: Padmarao Begari <padmarao.begari at amd.com>
---
 configs/xilinx_versal_mini_ospi_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/xilinx_versal_mini_ospi_defconfig b/configs/xilinx_versal_mini_ospi_defconfig
index 9af3817c82..e1cdc186fb 100644
--- a/configs/xilinx_versal_mini_ospi_defconfig
+++ b/configs/xilinx_versal_mini_ospi_defconfig
@@ -7,7 +7,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000
 CONFIG_SYS_MALLOC_F_LEN=0x500
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xFFFE0000
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xFFFFFE00
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_ENV_SIZE=0x80
 # CONFIG_DM_GPIO is not set
-- 
2.25.1