[PATCH 1/3] arch: arm: dts: phyboard-electra-uboot.dtsi: Add bootph props to i2c

[Daniel Schultz]

On 27.01.25 05:16, Wadim Egorov wrote:
> Add bootph-all properties to I2C0 nodes to ensure the bus and EEPROM
> are accessible across all stages. This enables reading the SoM
> configuration at any point during the boot process.
>
> Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
Tested-by: Daniel Schultz <d.schultz at phytec.de>
> ---
>   arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi b/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
> index 8f3c3a185ae..c68a48678a2 100644
> --- a/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
> @@ -72,6 +72,14 @@
>   	bootph-all;
>   };
>   
> +&main_i2c0 {
> +	bootph-all;
> +};
> +
> +&main_i2c0_pins_default {
> +	bootph-all;
> +};
> +
>   &main_mmc1_pins_default {
>   	bootph-all;
>   };