[PATCH v2 3/3] arm64: zynqmp: Describe images without TF-A

[Michal Simek]

U-Boot can run out of EL3, NS-EL2 and NS-EL1. Currently default
configuration is NS-EL2 with TF-A but when TF-A is not passed and
configured images can still boot just fine. That's why support this
configuration and describe it via binman.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

(no changes since v1)

 arch/arm/dts/zynqmp-binman-som.dts | 5 +++++
 arch/arm/dts/zynqmp-binman.dts     | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm/dts/zynqmp-binman-som.dts b/arch/arm/dts/zynqmp-binman-som.dts
index a66b948b266c..d5b63ef604ba 100644
--- a/arch/arm/dts/zynqmp-binman-som.dts
+++ b/arch/arm/dts/zynqmp-binman-som.dts
@@ -178,8 +178,13 @@
 					default = "conf-1";
 					conf-1 {
 						description = "Multi DTB with TF-A/TEE";
+#if CONFIG_BL31_LOAD_ADDR
 						firmware = "atf";
 						loadables = "tee", "uboot", "fdt";
+#else
+						firmware = "uboot";
+						loadables = "fdt";
+#endif
 					};
 				};
 			};
diff --git a/arch/arm/dts/zynqmp-binman.dts b/arch/arm/dts/zynqmp-binman.dts
index 16e1052a64a9..252c2ad552b0 100644
--- a/arch/arm/dts/zynqmp-binman.dts
+++ b/arch/arm/dts/zynqmp-binman.dts
@@ -87,9 +87,15 @@
 					default = "@conf-DEFAULT-SEQ";
 					@conf-SEQ {
 						description = "NAME";
+#if CONFIG_BL31_LOAD_ADDR
 						firmware = "atf";
 						loadables = "tee", "uboot";
 						fdt = "fdt-SEQ";
+#else
+						firmware = "uboot";
+						loadables = "fdt";
+#endif
+
 					};
 				};
 			};
-- 
2.43.0