[RFC PATCH v1 15/20] configs: add support for the Raspberrypi 5 board to default config

[Oleksii Moisieiev]

Add the default configuration file for RPI5 board.
To build u-boot for Raspberrypi 5 the following command should be
used:
> make rpi_arm64_defconfig CROSS_COMPILE=aarch64-linux-gnu-

Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev at epam.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk at epam.com>
---

 configs/rpi_arm64_defconfig | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
index 02f942cf34..feeef14954 100644
--- a/configs/rpi_arm64_defconfig
+++ b/configs/rpi_arm64_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_POSITION_INDEPENDENT=y
 CONFIG_ARCH_BCM283X=y
+CONFIG_BCM2712=y
 CONFIG_TARGET_RPI_ARM64=y
 CONFIG_ENV_SIZE=0x4000
 CONFIG_DEFAULT_DEVICE_TREE="bcm2711-rpi-4-b"
@@ -56,3 +57,21 @@ CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_VIDEO_BCM2835=y
 CONFIG_CONSOLE_SCROLL_LINES=10
 CONFIG_PHYS_TO_BUS=y
+
+CONFIG_RESET_BRCMSTB=y
+CONFIG_MFD_RP1=y
+
+CONFIG_PCI_PNP=y
+
+CONFIG_RESET_RASPBERRYPI=y
+CONFIG_RESET_BRCMSTB_RESCAL=y
+
+CONFIG_MACB=y
+
+CONFIG_CLK=y
+CONFIG_CLK_RP1=y
+CONFIG_OF_REAL=y
+
+CONFIG_RP1_GPIO=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_BOARD_TYPES=y
-- 
2.34.1