[PATCH 1/2] net: dwc_eth_qos_rockchip: Fix disable of RX/TX delay for RK356x

[Jonas Karlman]

When rgmii-rxid/txid/id phy-mode is used the MAC should not add RX
and/or TX delay. Currently RX/TX delay is configured as enabled using
zero as delay value for the rgmii-rxid/txid/id modes.

Change to disable RX and/or TX delay and using zero as delay value.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 drivers/net/dwc_eth_qos_rockchip.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dwc_eth_qos_rockchip.c b/drivers/net/dwc_eth_qos_rockchip.c
index 9fc8c686b889..3e10e07403c1 100644
--- a/drivers/net/dwc_eth_qos_rockchip.c
+++ b/drivers/net/dwc_eth_qos_rockchip.c
@@ -46,6 +46,10 @@ struct rockchip_platform_data {
 #define GRF_BIT(nr)	(BIT(nr) | BIT((nr) + 16))
 #define GRF_CLR_BIT(nr)	(BIT((nr) + 16))
 
+#define DELAY_ENABLE(soc, tx, rx) \
+	(((tx) ? soc##_GMAC_TXCLK_DLY_ENABLE : soc##_GMAC_TXCLK_DLY_DISABLE) | \
+	 ((rx) ? soc##_GMAC_RXCLK_DLY_ENABLE : soc##_GMAC_RXCLK_DLY_DISABLE))
+
 #define RK3568_GRF_GMAC0_CON0		0x0380
 #define RK3568_GRF_GMAC0_CON1		0x0384
 #define RK3568_GRF_GMAC1_CON0		0x0388
@@ -85,8 +89,7 @@ static int rk3568_set_to_rgmii(struct udevice *dev,
 
 	regmap_write(data->grf, con1,
 		     RK3568_GMAC_PHY_INTF_SEL_RGMII |
-		     RK3568_GMAC_RXCLK_DLY_ENABLE |
-		     RK3568_GMAC_TXCLK_DLY_ENABLE);
+		     DELAY_ENABLE(RK3568, tx_delay, rx_delay));
 
 	return 0;
 }
-- 
2.48.1