[PATCH v5 00/10] Introduce K3 remoteproc driver for M4 subsystem
Judith Mendez
jm at ti.com
Mon Feb 10 23:43:31 CET 2025
Hi Tom,
On 2/10/25 2:29 PM, Judith Mendez wrote:
> Some K3 devices like am62x and am64x have a M4 processor in the MCU
> voltage domain. This patch series introduces remoteproc M4 driver which
> will be used to load firmware into and start the M4 remote core.
>
> This series also adds support for R5F cores on am64x SoCs in patch 2 and
> sets up environment to load FW in remote cores in patch 3,4,5.
>
> This patch series also enables remoteproc drivers by default as per what
> remoteproc sybsystem is supported per SoC, thus all remoteproc options
> are now deleted in configs/* since they are no longer required.
>
> This patch series was tested on am64x EVM, am62x SK, am62ax SK,
> am62px SK boards.
>
> Any additional tested by's are welcome since I was not able to
> test any additional boards.
>
> Tested by running the following commands in u-boot prompt:
>
> => setenv dorprocboot 1
> => run boot_rprocs
>
> Links:
> v4: https://lore.kernel.org/u-boot/20250206015406.2702944-1-jm@ti.com/
> v3: https://lore.kernel.org/u-boot/20250130223256.1944522-1-jm@ti.com/
> v2: https://lore.kernel.org/u-boot/20250129225233.467139-1-jm@ti.com/
> v1: https://lore.kernel.org/u-boot/20250123010759.810799-1-jm@ti.com/
>
Forgot to add Andrew's Reviewed-by, apologies. If this series version
is picked up, could the tag be added? If not please let me know so I can
re-spin with Andrew's tag.
Thanks,
~ Judith
More information about the U-Boot
mailing list