[PATCH v3 0/7] Align pio3 pinctrl node with Linux
Eugen Hristev
eugen.hristev at linaro.org
Wed Feb 12 17:17:40 CET 2025
On 2/10/25 08:51, Manikandan Muralidharan wrote:
> The series adds support in the pinctrl driver and additional
> changes in the at91 DT to align the pio3 based pinctrl nodes
> in the u-boot DT with that of Linux
>
> Changes in v3:
> - 5/7 - Add comment block to describe at91_pinctrl_bind()
>
>
> Changes in v2:
> - 1/7 - Align the properties of AIC node with that of Linux
> - 2/7 - cosmetic fix
> - Align and arrange the pinmux child node as per Mainline Linux
> - 4/7 - Modify the pinctrl node compatible property
>
> Balamanikandan Gunasundar (1):
> ARM: dts: at91: sam9x60: Define pinctrl node with its label
>
> Manikandan Muralidharan (6):
> ARM: dts: at91: sam9x60: Add AIC node
> ARM: dts: at91: sam9x60: Move pinmux node to board DTS
> ARM: dts: at91: sam9x60: Add missing pinctrl node properties
> pinctrl: at91: Bind GPIO driver to the pinctrl DT node
> pinctrl: at91: Add support to align with Linux Devicetree
> ARM: dts: at91: Align pinctrl node with Linux Devicetree
>
> arch/arm/dts/at91-sam9x60_curiosity.dts | 71 ++++++++
> arch/arm/dts/at91sam9260.dtsi | 76 ++++-----
> arch/arm/dts/at91sam9261.dtsi | 77 ++++-----
> arch/arm/dts/at91sam9263.dtsi | 117 ++++++-------
> arch/arm/dts/at91sam9g45.dtsi | 106 ++++++------
> arch/arm/dts/at91sam9n12.dtsi | 93 +++++------
> arch/arm/dts/at91sam9rl.dtsi | 93 +++++------
> arch/arm/dts/at91sam9x5.dtsi | 90 +++++-----
> arch/arm/dts/sam9x60.dtsi | 151 +++++++----------
> arch/arm/dts/sam9x60ek.dts | 213 ++++++++++++++++--------
> arch/arm/dts/sama5d3.dtsi | 116 ++++++-------
> arch/arm/dts/sama5d4.dtsi | 118 +++++++------
> drivers/pinctrl/pinctrl-at91.c | 52 +++++-
> 13 files changed, 738 insertions(+), 635 deletions(-)
>
Applied to u-boot-at91/next !
Thanks
More information about the U-Boot
mailing list