[PATCH v4] rockchip: rk3308-rock-s0: Fix SD-card boot on v1.1 hw revision

[Jonas Karlman]

BootROM leave GPIO4_D6 configured as SDMMC_PWREN function and DW MMC
driver set PWREN high in dwmci_init().

However, HW revision prior to v1.2 must pull GPIO4_D6 low to access
sdmmc. For HW revision v1.2 the state of GPIO4_D6 has no impact.

Upstream Linux commit 26c100232b09 "arm64: dts: rockchip: Fix sdmmc
access on rk3308-rock-s0 v1.1 boards" fixed this issue by adding a
vcc_sd regulator.

Include the new vcc_sd regulator in SPL and enable required Kconfig
options to set GPIO4_D6 low to fix reading sdmmc on v1.1 hw revision.

Fixes: 25438c40a007 ("board: rockchip: Add Radxa ROCK S0")
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz at cherry.de>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
v4:
- Rebase on master, drop the applied dts/upstream patch
v3:
- Drop sdmmc_2030 and vcc_sd nodes now added to board DT in dts/upstream
v2:
- Rebased to fix clean apply on master
- Collect r-b tags
---
 arch/arm/dts/rk3308-rock-s0-u-boot.dtsi | 12 ++++++++++++
 configs/rock-s0-rk3308_defconfig        |  2 ++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi b/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi
index 84ca2ee0d5fb..c8c56b17a154 100644
--- a/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi
+++ b/arch/arm/dts/rk3308-rock-s0-u-boot.dtsi
@@ -7,6 +7,14 @@
 	bootph-some-ram;
 };
 
+&gpio4 {
+	bootph-pre-ram;
+};
+
+&sdmmc_2030 {
+	bootph-pre-ram;
+};
+
 &uart0 {
 	bootph-all;
 	clock-frequency = <24000000>;
@@ -16,6 +24,10 @@
 	bootph-all;
 };
 
+&vcc_sd {
+	bootph-pre-ram;
+};
+
 &vdd_core {
 	regulator-init-microvolt = <1015000>;
 };
diff --git a/configs/rock-s0-rk3308_defconfig b/configs/rock-s0-rk3308_defconfig
index 0a46e7bb1871..063e0b921d73 100644
--- a/configs/rock-s0-rk3308_defconfig
+++ b/configs/rock-s0-rk3308_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SPL_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3308-rock-s0"
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
@@ -53,6 +54,7 @@ CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PINCTRL=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
 CONFIG_BAUDRATE=1500000
-- 
2.48.1