[RFC PATCH 2/3] riscv: Select appropriate image type
Mayuresh Chitale
mchitale at ventanamicro.com
Fri Feb 21 13:58:52 CET 2025
Select between the 32-bit or 64-bit arch type for the image headers
depending on how the build is configured.
Signed-off-by: Mayuresh Chitale <mchitale at ventanamicro.com>
---
arch/riscv/dts/binman.dtsi | 14 ++++++++++----
arch/riscv/include/asm/u-boot.h | 4 ++++
2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/arch/riscv/dts/binman.dtsi b/arch/riscv/dts/binman.dtsi
index 0405faca574..a1a566b511b 100644
--- a/arch/riscv/dts/binman.dtsi
+++ b/arch/riscv/dts/binman.dtsi
@@ -5,6 +5,12 @@
#include <config.h>
+#ifdef CONFIG_64BIT
+#define ARCH "riscv64"
+#else
+#define ARCH "riscv"
+
+#endif
/ {
binman: binman {
multiple-images;
@@ -31,7 +37,7 @@
description = "U-Boot";
type = "standalone";
os = "U-Boot";
- arch = "riscv";
+ arch = ARCH;
compression = "none";
load = /bits/ 64 <CONFIG_TEXT_BASE>;
@@ -44,7 +50,7 @@
description = "Linux";
type = "standalone";
os = "Linux";
- arch = "riscv";
+ arch = ARCH;
compression = "none";
load = /bits/ 64 <CONFIG_TEXT_BASE>;
@@ -57,7 +63,7 @@
tee {
description = "OP-TEE";
type = "tee";
- arch = "riscv";
+ arch = ARCH;
compression = "none";
os = "tee";
load = /bits/ 64 <CONFIG_SPL_OPTEE_LOAD_ADDR>;
@@ -71,7 +77,7 @@
description = "OpenSBI fw_dynamic Firmware";
type = "firmware";
os = "opensbi";
- arch = "riscv";
+ arch = ARCH;
compression = "none";
load = /bits/ 64 <CONFIG_SPL_OPENSBI_LOAD_ADDR>;
entry = /bits/ 64 <CONFIG_SPL_OPENSBI_LOAD_ADDR>;
diff --git a/arch/riscv/include/asm/u-boot.h b/arch/riscv/include/asm/u-boot.h
index d5e1d5f3231..a90cc4c21cf 100644
--- a/arch/riscv/include/asm/u-boot.h
+++ b/arch/riscv/include/asm/u-boot.h
@@ -23,6 +23,10 @@
#include <asm/u-boot-riscv.h>
/* For image.h:image_check_target_arch() */
+#ifdef CONFIG_64BIT
+#define IH_ARCH_DEFAULT IH_ARCH_RISCV64
+#else
#define IH_ARCH_DEFAULT IH_ARCH_RISCV
+#endif
#endif /* _U_BOOT_H_ */
--
2.45.2
More information about the U-Boot
mailing list