[PATCH v3 08/23] arm: mvebu: a38x: Call bb_miiphy init directly in driver probe

[Marek Vasut]

All the resources needed by this .init callback should already
be available by the time probe function runs, simply call the
init callback directly and set the bb_miiphy init callback to
NULL. This shouldn't break anything on this hardware, but would
be nice if someone could double-check and test that.

Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Christian Marangi <ansuelsmth at gmail.com>
Cc: Ilias Apalodimas <ilias.apalodimas at linaro.org>
Cc: Jerome Forissier <jerome.forissier at linaro.org>
Cc: Jim Liu <JJLIU0 at nuvoton.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Mario Six <mario.six at gdsys.cc>
Cc: Michal Simek <michal.simek at amd.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
Cc: Paul Barker <paul.barker.ct at bp.renesas.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Sughosh Ganu <sughosh.ganu at linaro.org>
Cc: Tom Rini <trini at konsulko.com>
Cc: u-boot at lists.denx.de
---
V2: Reorder this earlier in the series
V3: No change
---
 board/gdsys/a38x/ihs_phys.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/board/gdsys/a38x/ihs_phys.c b/board/gdsys/a38x/ihs_phys.c
index 3370a4fa1a3..86708ee6715 100644
--- a/board/gdsys/a38x/ihs_phys.c
+++ b/board/gdsys/a38x/ihs_phys.c
@@ -236,7 +236,7 @@ int register_miiphy_bus(uint k, struct mii_dev **bus)
 		return retval;
 	*bus = miiphy_get_dev_by_name(name);
 
-	return 0;
+	return mii_mdio_init(&bb_miiphy_buses[k]);
 }
 
 struct porttype *get_porttype(uint octo_phy_mask, uint k)
@@ -318,7 +318,6 @@ int init_octo_phys(uint octo_phy_mask)
 struct bb_miiphy_bus bb_miiphy_buses[] = {
 	{
 		.name = "ihs0",
-		.init = mii_mdio_init,
 		.mdio_active = mii_mdio_active,
 		.mdio_tristate = mii_mdio_tristate,
 		.set_mdio = mii_set_mdio,
@@ -329,7 +328,6 @@ struct bb_miiphy_bus bb_miiphy_buses[] = {
 	},
 	{
 		.name = "ihs1",
-		.init = mii_mdio_init,
 		.mdio_active = mii_mdio_active,
 		.mdio_tristate = mii_mdio_tristate,
 		.set_mdio = mii_set_mdio,
@@ -340,7 +338,6 @@ struct bb_miiphy_bus bb_miiphy_buses[] = {
 	},
 	{
 		.name = "ihs2",
-		.init = mii_mdio_init,
 		.mdio_active = mii_mdio_active,
 		.mdio_tristate = mii_mdio_tristate,
 		.set_mdio = mii_set_mdio,
-- 
2.47.2