回复: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol support to SCMI agent

[Peng Fan]

On Fri, Feb 21, 2025 at 06:55:41PM +0100, Marek Vasut wrote:
>On 2/21/25 2:47 AM, Alice Guo (OSS) wrote:
>> > -----邮件原件-----
>> > 发件人: Marek Vasut <marex at denx.de>
>> > 发送时间: 2025年2月21日 6:35
>> > 收件人: Alice Guo (OSS) <alice.guo at oss.nxp.com>; Tom Rini
>> > <trini at konsulko.com>; Stefano Babic <sbabic at denx.de>; Fabio Estevam
>> > <festevam at gmail.com>; dl-uboot-imx <uboot-imx at nxp.com>; Lukasz
>> > Majewski <lukma at denx.de>; Sean Anderson <seanga2 at gmail.com>; Simon
>> > Glass <sjg at chromium.org>; Alper Nebi Yasak <alpernebiyasak at gmail.com>
>> > 抄送: u-boot at lists.denx.de; tharvey at gateworks.com; Alice Guo
>> > <alice.guo at nxp.com>
>> > 主题: Re: 回复: [PATCH v4 04/20] firmware: scmi: add pin control protocol
>> > support to SCMI agent
>> > 
>> > On 2/18/25 12:53 PM, Alice Guo (OSS) wrote:
>> > 
>> > [...]
>> > 
>> > > > > @@ -436,6 +442,11 @@ static int scmi_bind_protocols(struct udevice
>> > *dev)
>> > > > >     				drv = DM_DRIVER_GET(scmi_voltage_domain);
>> > > > >     			}
>> > > > >     			break;
>> > > > > +		case SCMI_PROTOCOL_ID_PINCTRL:
>> > > > > +			if (IS_ENABLED(CONFIG_PINCTRL_IMX_SCMI) &&
>> > > > 
>> > > > Is this pinctrl protocol really imx specific ?
>> > > > 
>> > > > If not, this needs to use some other config option to gate access to it.
>> > > 
>> > > Currently, it is used for some product families of the i.MX9 series products.
>> > Is the protocol iMX specific or is it generic protocol ?
>> 
>> SCMI_PROTOCOL_ID_PINCTRL is not unique to iMX, but drivers/pinctrl/nxp/pinctrl-scmi.c (drv = DM_DRIVER_GET(scmi_pinctrl_imx)) is only for iMX.
>This patch is changing common code, it shouldn't be littered with
>vendor-specific ifdeffery or if(IS_ENABLED(...))ery . Can this be made fully
>generic, similar to e.g. regulator protocol ?

In Linux Kernel, there are two drivers, pinctrl-scmi.c and pinctrl-imx-scmi.c.
Both follows ARM SCMI 3.2, but pinctrl-imx-scmi has some special settings
to align with i.mx iomuxc array based settings, mux,input,pad and etc.

In gerneral, imx part could be merged with pinctrl-scmi.c but that will
make code not clean.

Regards,
Peng