[PATCH] mmc: Fix size calculation for sector addressed MMC version 4

[Tom Rini]

On Wed, 29 Jan 2025 12:15:54 +0100, Marek Vasut wrote:

> For eMMC v4 and newer that is smaller than 2 GiB, the JEDEC JESD84-B51
> section 6.2.4 Configure partitions indicates that EXT_CSD SEC_COUNT
> should not be used to determine device size, and instead device size
> should be calculated from C_SIZE and C_SIZE_MULT.
> 
> This is not exactly accurate, the 2 GiB limit is not a hard line,
> there are eMMC devices which are smaller than 2 GiB and still
> require device size to be determined from EXT_CSD SEC_COUNT. The
> hard line is instead OCR HCS bit, which indicates whether the device
> is byte or sector addressed, the former applies to most devices
> below 2 GiB, and the later applies mostly to devices above 2 GiB.
> 
> [...]

Applied to u-boot/master, thanks!

-- 
Tom