[PATCH v3 14/15] configs: j722s_evm_r5: Add configs to enable Ethboot in R5SPL

Chintan Vankar c-vankar at ti.com
Tue Feb 25 12:49:02 CET 2025


Add configs to enable Ethernet boot in R5SPL, also disable not required
configs to avoid memory limitation.

Signed-off-by: Chintan Vankar <c-vankar at ti.com>
---

This patch is newly introduced in this series.

 configs/j722s_evm_r5_ethboot_defconfig | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 configs/j722s_evm_r5_ethboot_defconfig

diff --git a/configs/j722s_evm_r5_ethboot_defconfig b/configs/j722s_evm_r5_ethboot_defconfig
new file mode 100644
index 00000000000..fd58485bff2
--- /dev/null
+++ b/configs/j722s_evm_r5_ethboot_defconfig
@@ -0,0 +1,30 @@
+#include<configs/j722s_evm_r5_defconfig>
+
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SOC_K3_J722S=y
+CONFIG_TARGET_J722S_R5_EVM=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j722s-r5-evm"
+CONFIG_NET=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x200000
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_ETH=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="J722S U-Boot R5 SPL"
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_SPL_MMC=n
+CONFIG_SPL_SPI=n
+CONFIG_SPL_MTD_LOAD=n
+CONFIG_SPL_NAND_SPI_SUPPORT=n
+CONFIG_SPL_DM_DEVICE_REMOVE=n
+CONFIG_DM_MTD=n
+CONFIG_MTD_SPI_NAND=n
+CONFIG_DM_SPI_FLASH=n
+CONFIG_SPI=n
+CONFIG_DM_SPI=n
+CONFIG_CADENCE_QSPI=n
-- 
2.34.1



More information about the U-Boot mailing list